Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
1-9
CHAPTER
1
USING THE TOUCH PANEL
GETTING STARTED
Using the touch panel
READY TO COPY.
DUPLEX
1. A4
2.
A3
3 B4
ERASE
CANCEL
10
OK
OK
(0~20)
mm
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
* Margin shift (p.3-4)
* Erase (p.3-6)
Dual page copying (p.3-8)
Centring (p.3-10)
Transparency film with insert sheets
(p.3-12)
(p.3-12)
* Covers (p.3-14)
Colour adjustments (p.3-16)
* Single colour (p.3-26)
Neg./pos. reverse (p.3-28)
Mirror image (p.3-30)
* Photo repeat (p.3-32)
A3 (11 x 17) full-bleed (p.3-34)
Multi-page enlargement (p.3-36)
Extra size (p.3-38)
Function setting icons
Icons representing special functions which have been
selected will appear on the basic screen. The functions and
their associated icons are listed below.
selected will appear on the basic screen. The functions and
their associated icons are listed below.
The content of the icons of functions indicated by (*) will
vary depending upon particular settings selected for these
functions. The other functions are on or off type functions
and have no associated setting screens.
vary depending upon particular settings selected for these
functions. The other functions are on or off type functions
and have no associated setting screens.
1-10
CHAPTER
1
USING THE PRINT MODE AND
SCANNER FUNCTION
SCANNER FUNCTION
An optional power supply kit (AR-PX5) and an optional print controller board (AR-PE3) must be installed to use this
machine as a printer and a scanner.
machine as a printer and a scanner.
Printing documents from the computer
In most cases, it is not necessary to use the operation panel when printing documents
from the computer. When a document is sent to the printer from the computer, the printer
will automatically print the document. However, following the procedure specified below
can help the user ensure that documents are printed accurately. The procedure assumes
that the printer has been properly connected to a computer, and that a printer driver has
been installed.
NOTE:
When the auditing mode is enabled for the printer function, you must enter your account
number in the setting screen of the printer driver on your computer in order to print.
When an invalid account number is entered or no account number is entered, printing will
not be performed.
★ KEY OPERATOR
from the computer. When a document is sent to the printer from the computer, the printer
will automatically print the document. However, following the procedure specified below
can help the user ensure that documents are printed accurately. The procedure assumes
that the printer has been properly connected to a computer, and that a printer driver has
been installed.
NOTE:
When the auditing mode is enabled for the printer function, you must enter your account
number in the setting screen of the printer driver on your computer in order to print.
When an invalid account number is entered or no account number is entered, printing will
not be performed.
★ KEY OPERATOR
See page 8-26 for setting the auditing mode.
1
Check the operation panel to confirm that the ON LINE
indicator is lit. If the ON LINE indicator is not lit, press
the PRINT key to select the print mode and then press
the “ONLINE/OFFLINE” key on the touch panel to set the
printer to the on-line condition.
indicator is lit. If the ON LINE indicator is not lit, press
the PRINT key to select the print mode and then press
the “ONLINE/OFFLINE” key on the touch panel to set the
printer to the on-line condition.
2
Check the paper tray(s) to ensure that the desired paper
is loaded.
is loaded.
3
Using the computer and any appropriate application
software, load the document to be printed, set any
desired features using the installed printer driver, and
give the command to print the document. If necessary,
refer to the documentation for the computer and/or the
application software for help on issuing the necessary
commands.
software, load the document to be printed, set any
desired features using the installed printer driver, and
give the command to print the document. If necessary,
refer to the documentation for the computer and/or the
application software for help on issuing the necessary
commands.
4
The printer will print the document.
NOTE:
When the printer feature is used, if the ON LINE indicator is blinking
red, this machine cannot execute printing from some cause. Press
the PRINT key to select the print mode. A message indicating the
cause for the error such as no paper or no toner will be displayed.
Check the message and take proper measures.
When the printer feature is used, if the ON LINE indicator is blinking
red, this machine cannot execute printing from some cause. Press
the PRINT key to select the print mode. A message indicating the
cause for the error such as no paper or no toner will be displayed.
Check the message and take proper measures.
Selecting the on-line mode
If the printer is in the off-line mode, printing cannot be performed. To
select the on-line mode, follow the procedure below.
select the on-line mode, follow the procedure below.
1
If the printer is in the copy mode, press the PRINT key to
select the print mode.
select the print mode.
●
The basic screen of the print mode will appear.
2
Press the “ONLINE/OFFLINE” key on the touch panel to
switch the printer to the on-line mode.
switch the printer to the on-line mode.
3
To return to the copy mode, press the COPY key.
GETTING STARTED
Using the print mode and scanner function
1-11
CHAPTER
1
USING THE PRINT MODE AND SCANNER FUNCTION
Using the operation panel in the print mode
The operation panel provides access to many of the printer’s features
and functions. The basic procedure to access the printer’s features
and functions is shown below.
and functions. The basic procedure to access the printer’s features
and functions is shown below.
1
If the printer is in the copy mode, press the PRINT key to
select the print mode.
select the print mode.
●
The basic screen of the print mode will appear.
2
Press the “ONLINE/OFFLINE” key on the touch panel to
switch the printer to the off-line mode.
switch the printer to the off-line mode.
3
Press the “fiery” key on the touch panel, and then press
the “CONTROLLER SCREEN” key.
the “CONTROLLER SCREEN” key.
●
The FIERY PRINTER screen will appear.
4
Press the
key to display the printer functions
screen.
5
Use the keys on the touch panel to select the desired
operation.
operation.
●
When executing Secure Print (printing with password setting in
the printer driver), use the following procedure to enter the
password.
the printer driver), use the following procedure to enter the
password.
(1) Press the
key on the right side of “Secure Print.”
(2) Press the
or the
key to display the user name.
(3) Press the
key to select your user name.
(4) The password entry screen will appear. Use the 10-key pad to
enter your password and press the “OK” key.
(5) If the password is correct, the print setting menu will appear.
●
For details of the functions in the print mode, see the operation
manual for the Print Controller.
manual for the Print Controller.
●
To return to the print basic screen, press the return (
)
key.
How to select the paper type for the bypass tray
Before the paper type can be selected, paper must be placed in the
bypass tray and the key operator program “Enable Bypass-Tray
Type Detection” must be used to enable the selection (see page 8-
24). Proceed as follows.
bypass tray and the key operator program “Enable Bypass-Tray
Type Detection” must be used to enable the selection (see page 8-
24). Proceed as follows.
1
Press the PRINT key to select the print mode.
2
Press the “ONLINE/OFFLINE” key to enter the off-line
mode.
mode.
3
Press the “PAPER SELECT” key.
4
Use the touch panel to enter the paper type to match the
paper set in the bypass tray.
paper set in the bypass tray.
5
Press the “ONLINE/OFFLINE” key to restore the on-line
mode.
mode.
1.
A4
2.
A3
3.
B4
READY TO PRINT.
ONLINE
OFFLINE
PAPER SELECT
DUPLEX
100%
FIERY PRINTER SCREEN
AR-C330 PRINTER
idle
idle
4104MB
V1.1
info
GETTING STARTED
Using the print mode and scanner function
1-12
CHAPTER
1
USING THE PRINT MODE AND SCANNER FUNCTION
General operation steps for using the scanner
1
Install the required driver software in your computer in
accordance with the operation manual for the Print
Controller.
accordance with the operation manual for the Print
Controller.
2
Press the PRINT key and press the “ONLINE/OFFLINE”
key on the touch panel to switch the printer to the off-
line mode. Then, press the “fiery” key on the touch
panel.
key on the touch panel to switch the printer to the off-
line mode. Then, press the “fiery” key on the touch
panel.
3
When scanning in the remote scan mode:
Press the “REMOTE SCAN MODE” key on the touch panel.
When executing Scan job from the printer functions
screen:
screen:
●
Press the “CONTROLLER SCREEN” key on the touch panel,
and then press the
and then press the
key to display the printer functions
screen.
●
Press the
key on the right of “Scan job.”
4
Place the original on the document glass or in the
document feeder (optional).
document feeder (optional).
5
Acquire the image using the application software. For
the details, refer to the operation manual supplied with
the application software.
the details, refer to the operation manual supplied with
the application software.
6
Edit or store the scanned image. Refer to the instructions
supplied with the application software for details.
supplied with the application software for details.
GETTING STARTED
Using the print mode and scanner function
When using this machine as a scanner, two methods
are available: scanning in the remote scan mode and
executing Scan job from the printer functions screen.
For detailed instructions on using the machine as a
scanner, refer to the operation manual supplied with
the Print Controller.
are available: scanning in the remote scan mode and
executing Scan job from the printer functions screen.
For detailed instructions on using the machine as a
scanner, refer to the operation manual supplied with
the Print Controller.
●
To scan, process or edit document images by using
the scanning feature of the machine, Adobe
Photoshop
the scanning feature of the machine, Adobe
Photoshop
®
5.0 or later is needed.
NOTE:
When the auditing mode is turned on for the scanner
function, if you select the remote scan mode or select
Scan job from the printer functions screen, you must
enter your account number.
The method of entry of the account number is the
same as that for the copier function. See page 2-2.
★ KEY OPERATOR
When the auditing mode is turned on for the scanner
function, if you select the remote scan mode or select
Scan job from the printer functions screen, you must
enter your account number.
The method of entry of the account number is the
same as that for the copier function. See page 2-2.
★ KEY OPERATOR
See page 8-26 for setting the
auditing mode.
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.