Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
2-13
CHAPTER
2
6
Use the “PAPER SELECT” key to select the paper tray
with the desired paper size.
with the desired paper size.
●
If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratio.
paper size will have been automatically selected based on the
original size and selected copy ratio.
●
If a tray of the required size is not installed, use the bypass tray
and press the “PAPER SELECT” key to select the bypass tray.
and press the “PAPER SELECT” key to select the bypass tray.
7
Enter the desired number of copies.
8
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
REDUCTION/ENLARGEMENT/ZOOM
MAKING COPIES
Reduction/Enlargement/Zoom
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
115%
COPY RATIO
1.
2.
3.
A4
A3
B4
60~105 g/m
2
106~130 g/m
2
TRANSPARENCY
SPEED MODE
TRANSPARENCY
QUALITY MODE
QUALITY MODE
131~280 g/m
2
PAPER TYPE
2-14
CHAPTER
2
1
Place the original on the document glass or in the
optional document feeder tray.
optional document feeder tray.
2
Open the bypass tray.
3
Set the bypass tray guides to the width of the copy
paper.
paper.
●
Be sure to extend the tray when feeding paper larger than
A4 (8-1/2" x 11") size.
A4 (8-1/2" x 11") size.
●
If the bypass tray guides are set wider than the copy paper, the
inside of the machine may become soiled, resulting in smudges
on succeeding copies.
inside of the machine may become soiled, resulting in smudges
on succeeding copies.
4
Insert the copy paper all the way into the bypass tray.
●
Special purpose papers other than SHARP recommended
transparency film must be fed individually. Multiple sheets of
SHARP recommended transparency film can be loaded in the
bypass tray.
transparency film must be fed individually. Multiple sheets of
SHARP recommended transparency film can be loaded in the
bypass tray.
●
Up to 100 sheets of standard copy paper measuring from A6 to
A3W (5-1/2" x 8-1/2" to 12" x 18") can be loaded into the bypass
tray.
A3W (5-1/2" x 8-1/2" to 12" x 18") can be loaded into the bypass
tray.
●
For automatic two-sided copying of A5 paper, set the long edge
of the paper to be fed into the machine.
of the paper to be fed into the machine.
●
A6 size paper must be fed narrow side into the feed slot and must
be fed individually.
be fed individually.
●
When adding paper, first remove remaining paper, combine it
with the paper to be added and then reload as a single stack.
with the paper to be added and then reload as a single stack.
5
Press the “PAPER SELECT” key on the touch panel and
then select the desired paper type in the bypass tray
section.
then select the desired paper type in the bypass tray
section.
●
“60~105g/m
2
”
(“16 ~ 28 lbs.”) (“PLAIN PAPER”), “106~130g/m
2
”
(
“28+ ~ 35 lbs.” ) (“HEAVY PAPER 1”), “131~280g/m
2
”
(
“35+ ~ 75
lbs.” ) (“HEAVY PAPER 2”) , “TRANSPARENCY SPEED MODE”
or “TRANSPARENCY QUALITY MODE” can be set.
or “TRANSPARENCY QUALITY MODE” can be set.
6
Set the number of copies.
7
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
MAKING COPIES
Special papers (manual feed)
SPECIAL PAPERS (manual feed)
The bypass tray is used to copy onto transparency film and other
special purpose papers. Up to 100 sheets of standard copy paper
can be set in the bypass tray.
special purpose papers. Up to 100 sheets of standard copy paper
can be set in the bypass tray.
●
When copying onto transparency film, the maximum image loss on
the copies will be 10 mm (13/32") along the leading and trailing
edges and 6 mm (1/4") in total along the other edges.
Transparency film must be fed long edge into the feed slot.
the copies will be 10 mm (13/32") along the leading and trailing
edges and 6 mm (1/4") in total along the other edges.
Transparency film must be fed long edge into the feed slot.
●
Automatic duplex copying will not work when a non-standard sized
paper is used. If a duplex copying mode is selected and a non-
standard sized paper is used from the bypass tray, the
corresponding one-sided mode will be selected automatically
when a START (
paper is used. If a duplex copying mode is selected and a non-
standard sized paper is used from the bypass tray, the
corresponding one-sided mode will be selected automatically
when a START (
,
) key is pressed.
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
10
COPY
PAPER TYPE
1.
2.
3.
A4
A3
B4
A4
60~105 g/m
2
106~130 g/m
2
131~28
TRANSPARENCY
SPEED MODE
TRANSP
QUALIT
2-15
CHAPTER
2
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray.
1
Place the first original face down on the document glass
and make a copy.
and make a copy.
●
The first side of the copy can be made using any of the paper feed
stations.
stations.
2
Remove the first original and place the second original
face down on the document glass.
face down on the document glass.
●
Make sure the first and second originals are oriented in the same
way on the document glass.
way on the document glass.
●
If an optional document feeder is used, the originals must be fed
one at a time.
one at a time.
3
Turn the first copy over without changing its top-bottom
orientation and place it into the bypass tray.
orientation and place it into the bypass tray.
●
Be sure to feed the copies one sheet at a time.
4
Press the “PAPER SELECT” key and select the desired
paper type in the bypass tray section.
paper type in the bypass tray section.
5
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
SPECIAL PAPERS (manual feed)
MAKING COPIES
Special papers (manual feed)
1 2
1 2
3 4
3 4
1 2
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
10
COPY
PAPER TYPE
1.
2.
3.
A4
A3
B4
A4
60~105 g/m
2
106~130 g/m
2
131~28
TRANSPARENCY
SPEED MODE
TRANSP
QUALIT
2-16
CHAPTER
2
Automatic
This is the standard initial setting for this copier. In this mode, the
characteristics of an original being copied are “read” by the exposure
system, and exposure adjustments are made automatically.
This optimizes the contrast of the copied images.
characteristics of an original being copied are “read” by the exposure
system, and exposure adjustments are made automatically.
This optimizes the contrast of the copied images.
Original image type
TEXT/PRTD. PHOTO:
This mode provides the best balance for copying
an original which contains both text and printed
photographs.
an original which contains both text and printed
photographs.
TEXT:
This mode is useful in enhancing very low density
areas of an original or in suppressing unusually
high-density background areas.
areas of an original or in suppressing unusually
high-density background areas.
TEXT/PHOTO:
This mode provides the best balance for copying
an original which contains both text and
photographs.
an original which contains both text and
photographs.
PRINTED PHOTO: This mode is useful for copying printed
photographs.
PHOTO:
This mode provides the best copies of photographs
with fine details.
with fine details.
MAP:
This mode is useful to provide the best shading
and fine details found on most maps.
and fine details found on most maps.
COPY OF COPY: This mode provides the best result for originals
such as copied text or copied photos. If the check
box is checked, only Text/prtd. photo, Text and
Printed photo mode keys will be shown on the
touch panel and the exposure can only be adjusted
manually.
box is checked, only Text/prtd. photo, Text and
Printed photo mode keys will be shown on the
touch panel and the exposure can only be adjusted
manually.
EXPOSURE ADJUSTMENTS
Exposure selections for this copier should be selected according to
the type of originals being copied: TEXT/PRTD. PHOTO, TEXT,
TEXT/PHOTO, PHOTO, PRINTED PHOTO or MAP. (Refer to the
samples on page 4 to see the effects on copy images in relation to
the EXPOSURE ADJUSTMENTS.) If the original image type is
TEXT/PRTD. PHOTO, TEXT or TEXT/PHOTO, the exposure can be
adjusted automatically or manually. If the original image type is
PHOTO, PRINTED PHOTO or MAP, the exposure can be adjusted
manually only. If the COPY OF COPY mode is selected, only TEXT/
PRTD. PHOTO, TEXT or PRINTED PHOTO exposure can be
selected and these can only be manually adjusted. If the COLOUR
TONE ENHANCEMENT mode is selected, colour copies will be
more vivid. The standard initial setting of the original image type for
this copier is TEXT/PRTD. PHOTO.
the type of originals being copied: TEXT/PRTD. PHOTO, TEXT,
TEXT/PHOTO, PHOTO, PRINTED PHOTO or MAP. (Refer to the
samples on page 4 to see the effects on copy images in relation to
the EXPOSURE ADJUSTMENTS.) If the original image type is
TEXT/PRTD. PHOTO, TEXT or TEXT/PHOTO, the exposure can be
adjusted automatically or manually. If the original image type is
PHOTO, PRINTED PHOTO or MAP, the exposure can be adjusted
manually only. If the COPY OF COPY mode is selected, only TEXT/
PRTD. PHOTO, TEXT or PRINTED PHOTO exposure can be
selected and these can only be manually adjusted. If the COLOUR
TONE ENHANCEMENT mode is selected, colour copies will be
more vivid. The standard initial setting of the original image type for
this copier is TEXT/PRTD. PHOTO.
When copying a coloured original in the Black/White copy mode, a
coloured background with text in the background area may be
reproduced with the text unclear. Check with the key operator for
the setting of “Disabling of Pre-scan in B/W Copy” program (see
page 8-21). If pre-scan is enabled, text may be reproduced with
improved clarity.
coloured background with text in the background area may be
reproduced with the text unclear. Check with the key operator for
the setting of “Disabling of Pre-scan in B/W Copy” program (see
page 8-21). If pre-scan is enabled, text may be reproduced with
improved clarity.
MAKING COPIES
Exposure adjustments
AUTO
EXPOSURE
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.