Sharp AR-C200P (serv.man10) User Manual / Operation Manual ▷ View online
SETTING UP > 45
PCL emulation
Item
Value
Description
FONT SOURCE
Resident; Dimmo;
Downloaded
Downloaded
Selects location of the PCL font used.
Dimmo is displayed only when font
DIMM ROM exists in the slot.
Downloaded only appears if fonts
have been down loaded to the printer.
Dimmo is displayed only when font
DIMM ROM exists in the slot.
Downloaded only appears if fonts
have been down loaded to the printer.
FONT NO.
I000 to 1083
Sets the PCL font number.
The range of this variable changes
depending on the FONT SOURCE
setting at the time. If the default font
is set for FONT SOURCE, the number
starts at 0. If it is not, the number
starts at 1. The maximum value is
equal to the number of fonts installed
in FONT SOURCE.
The range of this variable changes
depending on the FONT SOURCE
setting at the time. If the default font
is set for FONT SOURCE, the number
starts at 0. If it is not, the number
starts at 1. The maximum value is
equal to the number of fonts installed
in FONT SOURCE.
FONT PITCH
0.44 cpi to 99.99 cpi
(
(
10.00 cpi)
Sets the font width in characters per
inch. Only displayed if the font is a
fixed spacing outline font.
inch. Only displayed if the font is a
fixed spacing outline font.
FONT HEIGHT
4.00 pt to 999.75 pt
(
(
12.00 pt)
Sets the font point size. Only
displayed if the font is a relative
spacing outline font.
displayed if the font is a relative
spacing outline font.
SYMBOL SET
PC-8
Selects a PCL character symbol set.
A4 PRINT WIDTH
78 column; 80 column
Selects the number of characters in a
line before automatic return
(A4paper), PCL mode.
line before automatic return
(A4paper), PCL mode.
WHITE PAGE SKIP
OFF; ON
Selects whether or not to print pages
that contain no data (white pages),
PCL mode.
that contain no data (white pages),
PCL mode.
CR FUNCTION
CR; CR+LF
Sets functionality on receipt of CR
code in PCL mode.
code in PCL mode.
LF FUNCTION
LF; LF+CR
Sets functionality on receipt of LF code
in PCL mode.
in PCL mode.
PRINT MARGIN
Normal; 1/5 inch; 1/6
inch
inch
Sets unprintable paper area (margin).
Normal: PCL emulation compatible
1/5 inch: domestic model emulation.
1/6 inch: HIPER-W emulation.
Normal: PCL emulation compatible
1/5 inch: domestic model emulation.
1/6 inch: HIPER-W emulation.
TRUE BLACK
ON;
OFF
PCL: Sets whether to use Composite
Black (CMYK mixed) or Pure Black (K
only) for the black (100%) in image
data. OFF: Mode using Composite
Black ON: Mode using Pure Black (not
valid with PostScript).
Black (CMYK mixed) or Pure Black (K
only) for the black (100%) in image
data. OFF: Mode using Composite
Black ON: Mode using Pure Black (not
valid with PostScript).
SETTING UP > 46
PPR Emulation
Item
Value
Description
PEN WIDTH
ADJUST
ADJUST
ON;
OFF
IN PCL, when switched ON,
emphasises the pen width to improve
the appearance of lines specified with
minimum width.
emphasises the pen width to improve
the appearance of lines specified with
minimum width.
CHARACTER PITCH
10 CPI; 12 CPI; 17 CPI;
20 CPI; PROPORTIONAL
20 CPI; PROPORTIONAL
Specifies character pitch in IBM PPR
emulation.
emulation.
FONT CONDENSE
12CPI - 20CPI; 12CPI -
12CPI
12CPI
Specifies 12CPI pitch for Condense
Mode.
Mode.
CHARACTER SET
Set 1;
Set 2
Specifies a character set.
SYMBOL SET
IBM 437
Specifies a symbol set.
LETTER 0 STYLE
Disable; Enable
Specifies the style that replaces 9BH
with letter o and 9DH with a zero
with letter o and 9DH with a zero
ZERO CHARACTER
Normal; Slashed
Sets the zero to be slashed or
unslashed.
unslashed.
LINE PITCH
6 LPI; 8 LPI
Specifies the line spacing.
WHITE PAGE SKIP
OFF; ON
Specifies whether or not the printer
ejects a blank sheet.
Not available on duplex operation.
ejects a blank sheet.
Not available on duplex operation.
CR FUNCTION
CR; CR+LF
Sets functionality on receipt of CR
code.
code.
LF FUNCTION
LF; LF+CR
Sets functionality on receipt of LF
code.
code.
LINE LENGTH
80 COLUMN; 136
COLUMN
COLUMN
Specifies the number of characters
per line.
per line.
FORM LENGTH
11 INCH; 11.7 INCH;
12 INCH
12 INCH
Specifies the length of paper.
TOF POSITION
0.0 INCH - 1.0 INCH
Specifies the distance of print from
the top edge of the paper.
the top edge of the paper.
LEFT MARGIN
0.0 INCH - 1.0 INCH
Specifies the distance of print from
the left hand edge of the paper.
the left hand edge of the paper.
FIT TO LETTER
Disable; Enable
Sets the printing mode that can fit
print data, equivalent to 11 inches (66
lines), in the LETTER-size printable
area.
print data, equivalent to 11 inches (66
lines), in the LETTER-size printable
area.
TEXT HEIGHT
Same; Diff
Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
SETTING UP > 47
FX Emulation
Item
Value
Description
CHARACTER PITCH
10 CPI; 12 CPI; 17 CPI;
20 CPI; PROPORTIONAL
20 CPI; PROPORTIONAL
Specifies character pitch in this
emulation.
emulation.
CHARACTER SET
Set 1;
Set 2
Specifies a character set.
SYMBOL SET
IBM 437
Specifies a symbol set.
LETTER 0 STYLE
Disable; Enable
Specifies the style that replaces 9BH
with letter o and 9DH with a zero
with letter o and 9DH with a zero
ZERO CHARACTER
Normal; Slashed
Sets the zero to be slashed or
unslashed.
unslashed.
LINE PITCH
6 LPI; 8 LPI
Specifies the line spacing.
WHITE PAGE SKIP
OFF; ON
Specifies whether or not the printer
ejects a blank sheet.
Not available on duplex operation.
ejects a blank sheet.
Not available on duplex operation.
CR FUNCTION
CR; CR+LF
Sets functionality on receipt of CR
code.
code.
LF FUNCTION
LF; LF+CR
Sets functionality on receipt of LF
code.
code.
LINE LENGTH
80 COLUMN; 136
COLUMN
COLUMN
Specifies the number of characters
per line.
per line.
FORM LENGTH
11 inch; 11.7 inch;
12 inch
12 inch
Specifies the length of paper.
TOF POSITION
0.0 inch - 1.0 inch
Specifies the distance of print from
the top edge of the paper.
the top edge of the paper.
LEFT MARGIN
0.0 inch - 1.0 inch
Specifies the distance of print from
the left hand edge of the paper.
the left hand edge of the paper.
FIT TO LETTER
Disable; Enable
Sets the printing mode that can fit
print data, equivalent to 11 inches (66
lines), in the LETTER-size printable
area.
print data, equivalent to 11 inches (66
lines), in the LETTER-size printable
area.
TEXT HEIGHT
Same; Diff
Sets the height of a character.
SAME: Regardless of CPI, same
height.
DIFF: As CPI, character heights vary.
SAME: Regardless of CPI, same
height.
DIFF: As CPI, character heights vary.
SETTING UP > 48
HP-GL/2 Emulation
Item
Value
Description
PEN 0 - 15 WIDTH
0.0 - 12.0 mm
Pen 0: 0.13 mm
Pen 1: 0.18 mm
Pen 2: 0.25 mm
Pen 3: 0.35 mm
Pen 4: 0.50 mm
Pen 5: 0.65 mm
Pen 6: 0.70 mm
Pen 7: 0.80 mm
Pen 8: 0.90 mm
Pen 9: 1.0 mm
Pen 10: 1.4 mm
Pen 11: 2.0 mm
Pen 12: 3.0 mm
Pen 13: 5.0 mm
Pen 14: 8.0 mm
Pen 15: 12.0 mm
Pen 0: 0.13 mm
Pen 1: 0.18 mm
Pen 2: 0.25 mm
Pen 3: 0.35 mm
Pen 4: 0.50 mm
Pen 5: 0.65 mm
Pen 6: 0.70 mm
Pen 7: 0.80 mm
Pen 8: 0.90 mm
Pen 9: 1.0 mm
Pen 10: 1.4 mm
Pen 11: 2.0 mm
Pen 12: 3.0 mm
Pen 13: 5.0 mm
Pen 14: 8.0 mm
Pen 15: 12.0 mm
Specifies the width of Pen 0 - 15 for
the menu palette to be used in GL/2
drawings.
The specified width is invalid if
PALETTE is not selected as PALETTE
SOURCE, and the default pen width in
this case is 0.35mm.
This will not affect GL/2 mode in PCL.
the menu palette to be used in GL/2
drawings.
The specified width is invalid if
PALETTE is not selected as PALETTE
SOURCE, and the default pen width in
this case is 0.35mm.
This will not affect GL/2 mode in PCL.
PEN 0 - 15
COLOUR
COLOUR
0.0 - 12.0 mm
Pen 0: 0
Pen 1: 1
Pen 2: 2
Pen 3: 3
Pen 4: 4
Pen 5: 5
Pen 6: 6
Pen 7: 7
Pen 8: 8
Pen 9: 12
Pen 10: 19
Pen 11: 27 mm
Pen 12: 35 mm
Pen 13: 68 mm
Pen 14: 100mm
Pen 15: 255 mm
Pen 0: 0
Pen 1: 1
Pen 2: 2
Pen 3: 3
Pen 4: 4
Pen 5: 5
Pen 6: 6
Pen 7: 7
Pen 8: 8
Pen 9: 12
Pen 10: 19
Pen 11: 27 mm
Pen 12: 35 mm
Pen 13: 68 mm
Pen 14: 100mm
Pen 15: 255 mm
Specifies the colour of Pen 0 - 15 for
the menu palette to be used in GL/2
drawings.
The specified colour is invalid if
PALETTE is not selected as PALETTE
SOURCE.
This will not affect GL/2 mode in PCL.
the menu palette to be used in GL/2
drawings.
The specified colour is invalid if
PALETTE is not selected as PALETTE
SOURCE.
This will not affect GL/2 mode in PCL.
ORIGIN
Corner
Centre
Centre
Specifies the origin in GL/2 drawings.
This will not affect GL/2 in PCL.
(The origin in GL/2 mode in PCL is in
the lower-left corner.)
This will not affect GL/2 in PCL.
(The origin in GL/2 mode in PCL is in
the lower-left corner.)
PEN 0 FUNCTION
White pen
End plot
End plot
Specifies the designation of Pen 0 in
GL/2 drawings. If END PLOT is set, the
command to select PEN 0 will prompt
printing, then ejecting.
This will not affect GL/2 mode in PCL.
GL/2 drawings. If END PLOT is set, the
command to select PEN 0 will prompt
printing, then ejecting.
This will not affect GL/2 mode in PCL.
Click on the first or last page to see other AR-C200P (serv.man10) service manuals if exist.