DOWNLOAD Sharp AR-C170 (serv.man48) Service Manual ↓ Size: 4.72 MB | Pages: 96 in PDF or view online for FREE

After loading an original, you can adjust the resolution and exposure settings to match the condition of the original
--for example, if it has small or faint characters, or if it is a photo. After loading the original in fax mode, adjust the
settings as explained below.

The initial resolution setting is STANDARD. To change the setting, follow these steps:

■

■

■

■ Change the resolution.

The selected key is
highlighted.
If you touched the [FINE]
key, [SUPER FINE] key,
or [ULTRA FINE] key,
you can also select
halftone by touching the
[HALF TONE] key.

You will return to the
initial screen.

■

■

■

■ Resolution settings

●

The factory default setting for the initial resolution is
[STANDARD]. The initial resolution can be changed
to a different setting in the key operator programs
(see "Initial resolution setting" on page 8-5).

●

When using the reversing single pass feeder, the
resolution setting cannot be changed once
scanning has begun.

●

When a fax is sent at [ULTRA FINE], [SUPER
FINE], or [FINE] resolution, a lower resolution will
be used if the receiving machine does not have
that resolution.

AUTO    A4

ORIGINAL

STANDARD

RESOLUTION

STANDARD

FINE

SUPER FINE

HALF TONE

ULTRA FINE

DARD

NE

FINE

HALF TONE

OK

FINE

Standard

Touch this key if your original consists
of normal-sized characters (like those
in this manual).

Fine

Touch this key if your original has small
characters or diagrams. The original
will be scanned at twice the resolution
of the [STANDARD] setting.

Super fine

Touch this key if your original has
intricate pictures or diagrams. A
higher-quality image will be produced
than with the [FINE] setting.

Ultra fine

Touch this key if your original has
intricate pictures or diagrams. This
setting gives the best image quality.
However, transmission will take longer
than with the other settings.

Half tone

Touch this key if your original is a
photograph or has gradations of colour
(such as a colour original). This setting
will produce a clearer image than
[FINE], [SUPER FINE], or [ULTRA
FINE] used alone. Half tone cannot be
selected if [STANDARD] has been
selected.

ApollonII_fax_ex.book  9 ページ  ２００４年９月２０日　月曜日　午後３時２４分

The initial exposure setting is AUTO. To change the setting, follow these steps:

■

■

■

■ Change the exposure.

To darken the exposure,
touch the 

 key. To

lighten the exposure,
touch the 

 key. To

return to auto exposure,
touch [AUTO].

You will return to the
initial screen.

■

■

■

■ Exposure settings

AUTO

EXPOSURE

STANDARD

RESOLUTION

AUTO

ORIGINAL

AUTO

MANUAL

MANUAL

AUTO

MANUAL

AUTO

OK

NOTE
When using the document glass to scan pages, the
exposure setting can be changed each time you
change pages. When using the reversing single
pass feeder, the exposure setting cannot be
changed once scanning has begun.

1 to 2

Select this setting if your original consists
mostly of dark characters.

Auto

This setting automatically adjusts the
exposure for light and dark parts of the
original.

4 to 5

Select this setting if your original consists
mostly of faint characters.

ApollonII_fax_ex.book  10 ページ  ２００４年９月２０日　月曜日　午後３時２４分

The fax function includes a convenient auto dial feature (one-touch dialing and group dialing). By programming
frequently dialed numbers, you can call and send documents to these locations by means of a simple dialing
operation (refer to page 2-3). There are two types of auto-dialing: one-touch dialing and group dialing. To program
auto-dial numbers, refer to pages 6-3, 6-6.

●

One-touch dialing
Simply press a one-touch key and then press the [BLACK
COPY START] key to dial the programmed location. A
name of up to 36 characters can be programmed for the
location (a maximum of 18 characters are displayed).
When using F-code transmission, a sub-address and
passcode can also be programmed (refer to page 4-2).

Touch the [ADDRESS DIRECTORY] key in
the initial screen to display the above screen.

●

Group dialing
Multiple one-touch dial locations can be programmed into
a single one-touch key. This is convenient for successively
sending a document to multiple locations.
• Full fax numbers entered with the numeric keys cannot

be stored in a group key. First program the number in a
one-touch key and then store it in a group key.

Touch the [ADDRESS DIRECTORY] key in
the initial screen to display the above screen.

●

Redialing
The machine keeps the last fax number dialed with the
numeric keys in memory. You can redial the last number
dialed by simply touching the [REDIAL] key.

●

On-hook dialing
Touch the [SPEAKER] key, listen for the dial tone through
the speaker, and then dial.
• Faxes must be sent manually when using on-hook

dialing. (Refer to page 5-2.)

• On-hook dialing is not possible using a one-touch key

that includes a sub-address and passcode, or a group
key.

●

A total of 500 one-touch dial and group keys can be programmed. (Refer to page 6-2.)

●

Programmed one-touch keys and group keys are stored on "index cards". A one-touch key or group key can be
easily accessed by touching the index key. (Refer to 

 on page 1-5.) 

●

To prevent calling or sending a fax to a wrong number, look carefully at the touch panel and make sure you
program the correct number when programming an auto-dial number. After storing a number, you can also print
out the stored number (refer to page 6-14) to make sure it was stored correctly.

FREQUENT USE

ABCD

EFGHI

JKLMN

OPQRS

CORPO.TPS

SHARP GROUP

SHARP CORPORATION

No.001:SHARP CORPORATION

0666211221

SHARP CORPORATION

FREQUENT USE

ABCD

EFGHI

JKLMN

OPQRST

CORPO.TPS

SHARP GROUP

No.005:SHARP GROUP

GROUP:025

ADDRESS

DIRECTORY

SUB ADDRESS

REDIAL

AKER

Y:100%

EPTION

FAX MEMORY:100%

AUTO RECEPTION

ADDR

DIRE

SUB 

RE

SPEAKER

5

ApollonII_fax_ex.book  11 ページ  ２００４年９月２０日　月曜日　午後３時２４分

ApollonII_fax_ex.book  12 ページ  ２００４年９月２０日　月曜日　午後３時２４分