Sharp AR-C170 (serv.man48) User Manual / Operation Manual ▷ View online
A LOOK AT THE OPERATION PANEL
1-5
1
[ORIGINAL] key (page 1-8)
Touch this key when you wish to manually set the
size of the original to be scanned or scan both
sides of the original.
size of the original to be scanned or scan both
sides of the original.
[RESOLUTION] key (page 1-9)
Touch this key to change the resolution setting for
the original to be scanned. The selected resolution
setting will be highlighted above the key. The initial
factory setting is [STANDARD].
Touch this key to change the resolution setting for
the original to be scanned. The selected resolution
setting will be highlighted above the key. The initial
factory setting is [STANDARD].
[EXPOSURE] key (page 1-10)
Touch this key to change the exposure setting for
the original to be scanned. The selected exposure
setting will be highlighted above the key. The initial
factory setting is [AUTO].
Special function icon display (page 6-2 of
"Operation manual (for general information
and copier operation)")
When a special function such as polling or dual
page scan is selected, a special function icon
appears here.
Touch this key to change the exposure setting for
the original to be scanned. The selected exposure
setting will be highlighted above the key. The initial
factory setting is [AUTO].
Special function icon display (page 6-2 of
"Operation manual (for general information
and copier operation)")
When a special function such as polling or dual
page scan is selected, a special function icon
appears here.
■
■
■
■ Address directory screen (alphabetically ordered)
The screen below appears initially when the address directory is set as the initial screen using "Default display
settings" (page 8-4) in the key operator programs.
settings" (page 8-4) in the key operator programs.
One-touch key display
This shows the one-touch keys that have been
stored on the selected "index card". The key type is
indicated by the icon at the right. One-touch keys in
which a fax number is stored are indicated by a
"
This shows the one-touch keys that have been
stored on the selected "index card". The key type is
indicated by the icon at the right. One-touch keys in
which a fax number is stored are indicated by a
"
" icon. The display is initially set to show 8 keys.
This can be changed to 6 or 12 using the key
operator program. (See "The number of direct
address keys displayed setting" on page 8-4.)
operator program. (See "The number of direct
address keys displayed setting" on page 8-4.)
Display switching keys
In cases where the one-touch keys cannot all be
displayed on one screen, this shows how many
screens are left. Touch the
In cases where the one-touch keys cannot all be
displayed on one screen, this shows how many
screens are left. Touch the
keys to move
through the screens.
[CONDITION SETTINGS] key
This displays the condition settings screen (previous
page), which is used to set various conditions.
This displays the condition settings screen (previous
page), which is used to set various conditions.
[ABC
GROUP] key (page 6-9)
Touch this key to switch between the alphabetical
index and the group index.
index and the group index.
Index keys (page 6-9)
One-touch key destinations are stored on each of
these index cards (alphabetical index or group
index). Touch this key to switch between the
indexes.
Group indexes make it possible to store one-touch
keys by group with an assigned name for easy
reference. This is done with the custom settings
(refer to pages 6-3 and 6-9). Frequently used
one-touch key destinations can be stored on the
[FREQUENT USE] card for convenient access.
One-touch key destinations are stored on each of
these index cards (alphabetical index or group
index). Touch this key to switch between the
indexes.
Group indexes make it possible to store one-touch
keys by group with an assigned name for easy
reference. This is done with the custom settings
(refer to pages 6-3 and 6-9). Frequently used
one-touch key destinations can be stored on the
[FREQUENT USE] card for convenient access.
11
12
13
14
A
FREQUENT USE
ABCD
EFGHI
JKLMN
OPQRST
UVWXYZ
ABC
GROUP
B
C
D
E
F
G
H
CONDITION
SETTINGS
READY TO SEND.
SUB ADDRESS
ADDRESS REVIEW
REDIAL
SPEAKER
1
2
3
4
5
1
2
3
4
5
NOTE
The screen shown above is the alphabetical address directory. If desired, the initial screen can be set to the group
address directory (refer to "Default display settings" on page 8-4).
The screen shown above is the alphabetical address directory. If desired, the initial screen can be set to the group
address directory (refer to "Default display settings" on page 8-4).
ApollonII_fax_ex.book 5 ページ ２００４年９月２０日 月曜日 午後３時２４分
1-6
ORIGINALS
ORIGINALS THAT CAN BE FAXED
■
■
■
■ Original sizes
■
■
■
■ Scanning area of original
Note that the edges of an original cannot be scanned.
Area that cannot be scanned: 2mm±2mm at edges of original
■
■
■
■ Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be
automatically reduced.
automatically reduced.
A document can also be faxed without reducing its size. In this case, the left and right edges will not be
transmitted. (See "Auto reduction sending setting" on page 8-7.)
transmitted. (See "Auto reduction sending setting" on page 8-7.)
Minimum original size
Maximum original size
Using the reversing single
pass feeder
pass feeder
A5: 210 mm (width) x 148 mm (length)
(8-1/2" (width) x 5-1/2" (length))
A5R: 148 mm (width) x 210 mm (length)
(5-1/2" (width) x 8-1/2" (length))
(8-1/2" (width) x 5-1/2" (length))
A5R: 148 mm (width) x 210 mm (length)
(5-1/2" (width) x 8-1/2" (length))
297 mm (width) x 800 mm* (length)
(11" (width) x 31-1/2"* (length))
* Long documents can be loaded
(11" (width) x 31-1/2"* (length))
* Long documents can be loaded
Using the document glass
297 mm (width) x 432 mm (length)
(11" (width) x 17" (length))
(11" (width) x 17" (length))
NOTE
Originals that are not a standard size (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R,
8-1/2"x14", 11"x17") can also be faxed.
Originals that are not a standard size (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R,
8-1/2"x14", 11"x17") can also be faxed.
Faxed document width
Receiving machine's paper width
Reduced size
Ratio (Area ratio)
A3 (11"x17")
B4 (8-1/2"x14")
B4 (8-1/2"x14")
1 : 0.78 (1 : 0.64)
A3 (11"x17")
A4 (8-1/2"x11")
A4R (8-1/2"x11"R)
1 : 0.5 (1 : 0.5)
ApollonII_fax_ex.book 6 ページ ２００４年９月２０日 月曜日 午後３時２４分
1-7
1
LOADING A DOCUMENT
A document can be loaded in the reversing single pass feeder or on the document glass. Use the reversing single
pass feeder when faxing a large number of sheet originals. Use the document glass to fax originals that cannot be
scanned using the reversing single pass feeder such as thick or thin sheet originals or bound originals such as books.
pass feeder when faxing a large number of sheet originals. Use the document glass to fax originals that cannot be
scanned using the reversing single pass feeder such as thick or thin sheet originals or bound originals such as books.
USING THE REVERSING SINGLE PASS FEEDER
1
Lift the document glass cover and make
sure a document is not placed on the
document glass. Gently close the cover.
sure a document is not placed on the
document glass. Gently close the cover.
2
Adjust the document guides on the
document feeder tray to the width of the
document.
document feeder tray to the width of the
document.
3
Align the edges of the document pages
and then insert the stack in the document
feeder tray so that the first page is face up.
and then insert the stack in the document
feeder tray so that the first page is face up.
Insert the stack into the
document feeder tray until
it stops.
document feeder tray until
it stops.
USING THE DOCUMENT GLASS
1
Open the document glass cover, and place
the document face down on the document
glass. Gently close the cover.
the document face down on the document
glass. Gently close the cover.
Regardless of the size of the original, place the
original on the left side of the document glass. (Align
the original with the document glass scale and
centring
original on the left side of the document glass. (Align
the original with the document glass scale and
centring
mark.)
Place the original in the appropriate position for its
size as shown below.
size as shown below.
NOTE
Use the reversing single pass feeder for long
originals. The document glass cannot be used.
Use the reversing single pass feeder for long
originals. The document glass cannot be used.
NOTE
Do not place any objects under the original size
detector plate. Closing the document glass cover
with an object underneath may damage the original
size detector plate and prevent correct detection of
the document size.
Do not place any objects under the original size
detector plate. Closing the document glass cover
with an object underneath may damage the original
size detector plate and prevent correct detection of
the document size.
Original size detector
A5
R
A4
R
A4
A5
A3
B4
B5
B5
R
Document glass scale
mark
Document glass scale
mark
ApollonII_fax_ex.book 7 ページ ２００４年９月２０日 月曜日 午後３時２４分
1-8
CHECKING THE SIZE OF A LOADED ORIGINAL
When a standard-size* original is placed, the original size is automatically detected
(automatic original detection function) and displayed in the top half of the
[ORIGINAL] key. Check the key to make sure that the original size has been
correctly detected.
(automatic original detection function) and displayed in the top half of the
[ORIGINAL] key. Check the key to make sure that the original size has been
correctly detected.
: [AUTO] appears when the automatic original detection function is operating.
: Displays the original size.
: Displays the original size.
If a non-standard size original is placed or if you wish to change the scanning
size, follow the steps below to manually set the original scanning size.
size, follow the steps below to manually set the original scanning size.
MANUALLY SETTING THE SCANNING SIZE
If you load an original that is not a standard size (such as a long original or an INCH size), or if the size is not detected
correctly, you must touch the [ORIGINAL] key and set the original size manually. Perform the following steps after
loading the document in the document feeder tray or on the document glass (see the previous page).
correctly, you must touch the [ORIGINAL] key and set the original size manually. Perform the following steps after
loading the document in the document feeder tray or on the document glass (see the previous page).
1
Touch the [ORIGINAL] key.
If the address directory
screen appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 1-5).
screen appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 1-5).
2
Touch the [MANUAL] key.
The sizes that can be
selected are displayed.
selected are displayed.
3
Touch the desired original size key.
[AUTO] is no longer
highlighted. [MANUAL] and
the original size key you
touched are highlighted.
To select B4 (8x1/2"x14"),
A3 (11"x17"), or "LONG
SIZE", touch the
highlighted. [MANUAL] and
the original size key you
touched are highlighted.
To select B4 (8x1/2"x14"),
A3 (11"x17"), or "LONG
SIZE", touch the
key and
then touch the appropriate
original size key.
original size key.
To select an inch size,
touch the [INCH] tab.
touch the [INCH] tab.
Touch the appropriate
inch original size key.
The selected key is
highlighted. To return to
the AB original size
palette, touch the [AB]
tab.
inch original size key.
The selected key is
highlighted. To return to
the AB original size
palette, touch the [AB]
tab.
4
Touch the outer [OK] key.
You will return to the
initial screen. (Touching
the inner [OK] key in the
step above returns you
to step 2.)
initial screen. (Touching
the inner [OK] key in the
step above returns you
to step 2.)
5
The selected size appears in the top half of
the [ORIGINAL] key.
the [ORIGINAL] key.
AUTO A4
ORIGINAL
STANDARD
RESOLUTION
1
2
NOTE
* Standard sizes that can be detected are as follows:
A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard
size original is loaded (including special sizes), the closest standard size may be displayed, or the original size
may not appear at all.
A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard
size original is loaded (including special sizes), the closest standard size may be displayed, or the original size
may not appear at all.
AUTO A4
ORIGINAL
STANDARD
RESOLUTION
MANUAL
ORIGINAL SIZE
O
2-SIDED
BOOKLET
IDED
OK
OK
ORIGINAL SIZE
SPEAKER
REDIAL
MANUAL
AUTO
A4R
B5R
A5
A5R
A4
B5
INCH
AB
OK
OK
ORIGINAL SIZE
SPEAKER
REDIAL
MANUAL
AUTO
A4R
B5R
A5
A5R
A4
B5
INCH
AB
SPEAKER
REDIAL
OK
OK
ORIGINAL SIZE
MANUAL
AUTO
INCH
AB
8 X11
1
/
2
5 X8 R
1
/
2
1
/
2
5 X8
1
/
2
1
/
2
8 X11R
1
/
2
8 X14
1
/
2
11X17
OK
OK
UAL
8 X11
1
/
2
11X17
ORIGINAL
STANDARD
RESOLUTION
8 X11
1
/
2
ApollonII_fax_ex.book 8 ページ ２００４年９月２０日 月曜日 午後３時２４分
Click on the first or last page to see other AR-C170 (serv.man48) service manuals if exist.