Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
35
2
MA
KING COP
IE
S
ROTATION COPYING
If rotation of original image is enabled using a key operator program, the image of the original will rotate
when the orientation of the original does not match that of the copy paper. Rotation copying will function
only if the auto paper select mode or the auto image mode has been selected. Even if rotation of
original image is disabled using a key operator program, rotation copying will function when the 2 in 1
or 4 in 1 function is selected. However, if enlargement copying onto a paper size larger than A4
(8-1/2" x 11") is performed, the image cannot be rotated. In this case, the original must be rotated 90
when the orientation of the original does not match that of the copy paper. Rotation copying will function
only if the auto paper select mode or the auto image mode has been selected. Even if rotation of
original image is disabled using a key operator program, rotation copying will function when the 2 in 1
or 4 in 1 function is selected. However, if enlargement copying onto a paper size larger than A4
(8-1/2" x 11") is performed, the image cannot be rotated. In this case, the original must be rotated 90
°
.
If the margin shift feature is set, rotation copying will not function.
★KEY OPERATOR See page 128 for enabling/disabling rotation copying.
Example: Copying from an A3 (11" x 17") original onto A4 (8-1/2" x 11") paper
★KEY OPERATOR See page 128 for enabling/disabling rotation copying.
Example: Copying from an A3 (11" x 17") original onto A4 (8-1/2" x 11") paper
1
Place an original on the platen glass and close the platen cover.
2
Use the PAPER SELECT key to select the desired tray.
3
Press the AUTO IMAGE key.
●
The appropriate copy ratio will be automatically selected for rotation copying.
4
Set the number of copies and press the START (
) key.
NOTE:
Images of originals may also be rotated in the auto paper select mode.
Images of originals may also be rotated in the auto paper select mode.
Original
Paper
Copy
Cover1_2SUK.book 35 ページ ２００１年５月２４日 木曜日 午後８時５５分
36
MA
KING COP
IE
S
BYPASS FEED (special
paper)
paper)
The bypass tray must be used to feed special papers such as transparency film and labels but can also
be used to feed standard copy paper.
be used to feed standard copy paper.
Acceptable paper for copying from the bypass
tray
tray
* For paper weighing from 105 to 128 g/m
2
(28 to 34 lbs.), A4 (8-1/2" x 11") is the maximum size that
can be fed through the bypass tray.
**Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-
adhesive patches or synthetic materials. These will cause physical damage to the copier.
●
For best results, use only paper recommended by SHARP.
●
Special papers except SHARP recommended transparency film, labels, and envelopes must be fed
one sheet at a time through the bypass tray. Up to 40 sheets of SHARP recommended transparency
film and labels can be set at one time. Up to 5 envelopes can be set at one time.
one sheet at a time through the bypass tray. Up to 40 sheets of SHARP recommended transparency
film and labels can be set at one time. Up to 5 envelopes can be set at one time.
●
When feeding two or three hole prepunched paper, load the paper so that the punched edge is not
positioned in the feed slot.
positioned in the feed slot.
Copying from the bypass tray
1
Unfold the bypass tray.
●
When feeding A4R, B4 or A3 (8-1/2" x 11"R, 8-1/2" x 14" or 11" x 17") sized paper,
extend the bypass tray to support the paper.
extend the bypass tray to support the paper.
Size
Weight
Capacity (80 g/m
2
(21
lb.) paper)
Special paper
Ordinary paper: A5 to A3
(5-1/2" x 8-1/2" to 11" x 17")
(5-1/2" x 8-1/2" to 11" x 17")
52 to 128 g/m
2
(14 lbs.
to 34 lbs.)* (Ordinary
paper)
paper)
100 sheets
Transparency
film, labels,
envelopes**
film, labels,
envelopes**
Envelopes: International DL
(110 x 220 mm), International
C5 (162 x 229 mm),
Commercial 10 (4-1/8" x 9-1/2")
(110 x 220 mm), International
C5 (162 x 229 mm),
Commercial 10 (4-1/8" x 9-1/2")
Cover1_2SUK.book 36 ページ ２００１年５月２４日 木曜日 午後８時５５分
BYPASS FEED (special paper)
37
2
MA
KING COP
IE
S
2
Set the paper guides to the copy paper width.
3
Insert the copy paper (print face down) all the way into the bypass
tray.
tray.
●
For the number of sheets which can be loaded into the tray, see the previous page.
●
When adding paper, first remove any paper remaining in the tray, combine it with the
paper to be added and then reload as a single stack. The paper to be added must be the
same size and type as the paper already in the tray.
paper to be added and then reload as a single stack. The paper to be added must be the
same size and type as the paper already in the tray.
●
When loading envelopes, make sure that they are straight and flat and do not have
loosely glued construction flaps (not the closure flap).
loosely glued construction flaps (not the closure flap).
4
Press the PAPER SELECT key to select the bypass tray.
NOTE:
When copying onto paper that is fed from the bypass tray, the print start position in the vertical
direction can be adjusted as follows. Press the SPECIAL FUNCTION key. Use the and key to
select "EXTRA IMAGE ADJ." and then press the OK key. Use the and key to adjust the print
start position to the front (+) or to the rear (-). Press the OK key. The position can be adjusted
from -10 mm to +10 mm in 0.5 mm increments (-0.5 inch to +0.5 inch in 0.02 inch increments).
This feature can be used only for extra size paper (indicated as "EXTRA" in the display) placed in
the bypass tray and cannot be used for standard size paper.
When copying onto paper that is fed from the bypass tray, the print start position in the vertical
direction can be adjusted as follows. Press the SPECIAL FUNCTION key. Use the and key to
select "EXTRA IMAGE ADJ." and then press the OK key. Use the and key to adjust the print
start position to the front (+) or to the rear (-). Press the OK key. The position can be adjusted
from -10 mm to +10 mm in 0.5 mm increments (-0.5 inch to +0.5 inch in 0.02 inch increments).
This feature can be used only for extra size paper (indicated as "EXTRA" in the display) placed in
the bypass tray and cannot be used for standard size paper.
EXTRA IMAGE ADJ.
(-10~+10)
mm
:TO FRONT (+)
:TO REAR (-)
0.0
EXTRA IMAGE ADJ.
(-0.5~+0.5)
inch
:TO FRONT (+)
:TO REAR (-)
0.00
Cover1_2SUK.book 37 ページ ２００１年５月２４日 木曜日 午後８時５５分
BYPASS FEED (special paper)
38
MA
KING COP
IE
S
5
Set the number of copies and press the START (
) key.
NOTE:
The bypass tray can be used to copy onto the two sides of paper manually.
When copying the second original, be sure to turn over the copy of the first original left to right
and place it into the bypass tray as shown in the illustration.
The bypass tray can be used to copy onto the two sides of paper manually.
When copying the second original, be sure to turn over the copy of the first original left to right
and place it into the bypass tray as shown in the illustration.
Second original
Copy of first original
Cover1_2SUK.book 38 ページ ２００１年５月２４日 木曜日 午後８時５５分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.