Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
19
1
GE
T
T
IN
G
S
T
T
ARTE
D
FUNCTION REVIEW
The current settings of copier functions that have been selected can be viewed in the display.
●
The XY ZOOM and TRANSPARENCY functions cannot be viewed on the function review screen.
1
Press the JOB STATUS key.
●
The review screen will appear.
2
Use the and keys to select a function.
●
The setting for the selected function will appear in the display.
●
The settings of the duplex copy mode (1-sided to 1-sided, etc.), sort/group mode, and
special functions can be displayed. Exposure, paper size, and copy ratio settings which
are normally displayed on the basic screen cannot be displayed on the review screen.
special functions can be displayed. Exposure, paper size, and copy ratio settings which
are normally displayed on the basic screen cannot be displayed on the review screen.
3
To exit the review screen, press the BACK key.
●
The display will return to the basic screen.
2in1
PATTERN1
NO
PATTERN1
NO
FUNCTION REVIEW
8 11
1
2
/
Ready to copy.
100%
100%
AUTO
AUTO
A4
Cover1_2SUK.book 19 ページ 2001年5月24日 木曜日 午後8時55分
20
GE
T
T
IN
G
S
T
T
ARTE
D
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not perform copier functions until an
assigned 5-digit account number has been entered.
★ KEY OPERATOR See page 137 for setting the auditing mode.
assigned 5-digit account number has been entered.
★ KEY OPERATOR See page 137 for setting the auditing mode.
How to copy in the auditing mode
If the copier has been programmed in the auditing mode, the following message will appear in the
display in place of the normal initial conditions display.
display in place of the normal initial conditions display.
1
Enter your account number using the numeric keys.
●
As each digit is entered, the dashes in the display will change to asterisks.
●
After the number is entered, the following message will appear in the display.
●
"REMAINING" will appear only if account limit has been set using a key operator
program.
program.
★KEY OPERATOR See page 140 for account limit.
●
The message will be displayed for several seconds, then change to the following
message.
message.
Enter your account
number.
ACCOUNT #:
number.
ACCOUNT #:
100%
100%
AUTO
AUTO
COPIES MADE:000
,000
REMAINING:000
,000
A4
8 11
1
2
/
Ready to copy.
100%
100%
AUTO
AUTO
A4
Cover1_2SUK.book 20 ページ 2001年5月24日 木曜日 午後8時55分
AUDITING ACCOUNTS
21
1
GE
T
T
IN
G
S
T
T
ARTE
D
2
When copying is completed, press the AUDIT CLEAR (ACC.#-C) key.
NOTE:
If an unassigned number is entered, "Enter your account number." will appear again in the
display, indicating that the number was not accepted.
When the key operator program for account number security has been set and unassigned
numbers are entered three successive times, the copier will not accept another number for one
minute, and the following message will appear.
If an unassigned number is entered, "Enter your account number." will appear again in the
display, indicating that the number was not accepted.
When the key operator program for account number security has been set and unassigned
numbers are entered three successive times, the copier will not accept another number for one
minute, and the following message will appear.
★KEY OPERATOR See page 140 for account number security.
Please see your
key operator for
assistance.
assistance.
Cover1_2SUK.book 21 ページ 2001年5月24日 木曜日 午後8時55分
22
GE
T
T
IN
G
S
T
T
ARTE
D
Cover1_2SUK.book 22 ページ 2001年5月24日 木曜日 午後8時55分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.