Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
23
2
CHAPTER 2
MAKING COPIES
This chapter describes the basic copying functions such as normal
copying, reduction or enlargement, and exposure adjustments.
copying, reduction or enlargement, and exposure adjustments.
Page
●
NORMAL COPYING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
●
TWO-SIDED COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Two-sided copying from the platen glass. . . . . . . . . . . . . . . . . . . . 26
Two-sided copying from the platen glass. . . . . . . . . . . . . . . . . . . . 26
●
EXPOSURE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
●
REDUCTION/ENLARGEMENT/ZOOM . . . . . . . . . . . . . . . . . . . . . 31
Automatic selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Manual selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Automatic selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Manual selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
●
ROTATION COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
●
BYPASS FEED (special paper) . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Acceptable paper for copying from the bypass tray. . . . . . . . . . . . 36
Copying from the bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Acceptable paper for copying from the bypass tray. . . . . . . . . . . . 36
Copying from the bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
●
INTERRUPTING A COPY RUN . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Cover1_2SUK.book 23 ページ ２００１年５月２４日 木曜日 午後８時５５分
24
MA
KING COP
IE
S
NORMAL COPYING
The basic copying procedure is described below.
●
Image loss (max. 4 mm (5/32")) can occur at the leading and trailing edges of the copies. Also image
loss (max. 3 mm (1/8")) can occur along the other edges of the copies.
loss (max. 3 mm (1/8")) can occur along the other edges of the copies.
NOTE:
If the copier has been programmed in the auditing mode, enter a 5-digit account number.
See page 20.
If the copier has been programmed in the auditing mode, enter a 5-digit account number.
See page 20.
1
Place an original face down on the platen glass and align it with the
original size scale.
original size scale.
●
The detected original size will be indicated in the display.
NOTE:
If the original size cannot be detected, the original size can be entered as follows. Press the
SPECIAL FUNCTION key. Use the and keys to select "ORIG. SIZE ENTER" and then press
the OK key. Use the and key to select "AB" or "INCH" and use the and keys to select the
desired original size. Press the OK key.
If the original size cannot be detected, the original size can be entered as follows. Press the
SPECIAL FUNCTION key. Use the and keys to select "ORIG. SIZE ENTER" and then press
the OK key. Use the and key to select "AB" or "INCH" and use the and keys to select the
desired original size. Press the OK key.
2
Close the platen cover.
●
Paper matching the size of the original will be automatically selected when the auto
paper select function has been enabled. To copy onto paper of a different size, press the
PAPER SELECT key.
paper select function has been enabled. To copy onto paper of a different size, press the
PAPER SELECT key.
●
Paper of the different orientation may be selected if the auto paper select or auto image
function has been selected. In this case, the image of the original will be rotated and
copied. See page 35.
function has been selected. In this case, the image of the original will be rotated and
copied. See page 35.
★KEY OPERATOR The auto paper select function can be disabled using a key operator
program. If this function is disabled, use the PAPER SELECT key to select the desired
paper tray. See page 134.
paper tray. See page 134.
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
DISPLAY CONTRAST
ORIG. SIZE ENTER
AB
A3
B4
A4
Cover1_2SUK.book 24 ページ ２００１年５月２４日 木曜日 午後８時５５分
NORMAL COPYING
25
2
MA
KING COP
IE
S
3
Ensure that the desired paper tray is selected.
4
Set the number of copies using the numeric keys.
●
A single copy can be made even when "0" is displayed.
●
Press the CLEAR (C) key to clear an entry if a mistake is made.
5
Press the START (
) key.
●
The number in the copy quantity display will decrease by 1 each time a copy is made.
●
To repeat the same copy sequence for a different original, simply replace the original and
press the START (
press the START (
) key.
●
Press the CLEAR (C) key to stop copying in the middle of a run.
NOTES:
●
When copying a book or an original which has been folded or a crumpled original, press down
lightly on the platen cover. This will reduce shadow lines caused by uneven contact between
the original and the platen glass.
lightly on the platen cover. This will reduce shadow lines caused by uneven contact between
the original and the platen glass.
●
The platen cover can be removed to allow copying of bulky objects. To remove it, open the
platen cover and lift it at a slightly backward angle. To reattach the platen cover, reverse the
above procedure.
platen cover and lift it at a slightly backward angle. To reattach the platen cover, reverse the
above procedure.
The capacity of the centre tray is 500 sheets (400 sheets for A3, B4, 11" x 17", and 8-1/2" x 14" sizes).
When the number of copies output reaches this limit, copying will stop and the START (
When the number of copies output reaches this limit, copying will stop and the START (
) key
indicator will go out. Remove the copies from the centre tray and press the START (
) key to resume
copying.
8 11
1
2
/
Ready to copy.
100%
100%
AUTO
AUTO
A4
A4
Cover1_2SUK.book 25 ページ ２００１年５月２４日 木曜日 午後８時５５分
26
MA
KING COP
IE
S
TWO-SIDED COPYING
Two-sided copies can be made by manually placing originals on the platen glass as described in the
procedure below. Fully automatic two-sided copies can be made from one-sided originals if either an
optional single pass feeder (SPF) or an optional reversing single pass feeder (RSPF) is installed. See
page 95. Additionally, fully automatic two-sided copying of two-sided originals or one-sided copying of
two-sided originals can be made if an optional RSPF is installed. See page 98.
procedure below. Fully automatic two-sided copies can be made from one-sided originals if either an
optional single pass feeder (SPF) or an optional reversing single pass feeder (RSPF) is installed. See
page 95. Additionally, fully automatic two-sided copying of two-sided originals or one-sided copying of
two-sided originals can be made if an optional RSPF is installed. See page 98.
NOTE:
The image for the second side can be rotated 180
The image for the second side can be rotated 180
° top to bottom to allow tablet type binding.
Two-sided copying from the platen glass
★KEY OPERATOR If two-sided copying is disabled using a key operator program, the procedure
below cannot be performed. See page 135.
1
Place the first original face down on the platen glass and close the
platen cover.
platen cover.
2
Press the 2-SIDED COPY key.
●
The duplex copy mode selection screen will appear.
COPY MODE
1 to 1
1 to 2
Cover1_2SUK.book 26 ページ ２００１年５月２４日 木曜日 午後８時５５分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.