Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
MAIN FEATURES
11
1
GE
T
T
IN
G
S
T
T
ARTE
D
4
Scan once/ Print many
●
The copier is equipped with a memory buffer allowing the copier to scan an
original once and make up to 999 copies of the scanned image. This improves
workflow, reduces operating noise from the copier and reduces wear and tear
on the scanning mechanism, which provides for a higher reliability.
original once and make up to 999 copies of the scanned image. This improves
workflow, reduces operating noise from the copier and reduces wear and tear
on the scanning mechanism, which provides for a higher reliability.
5
Optional features
●
An optional single pass feeder (SPF) allows automatic document feeding of up
to 30 sheets of single-sided originals.
to 30 sheets of single-sided originals.
●
An optional reversing single pass feeder (RSPF) allows automatic document
feeding of up to 30 two-sided originals.
feeding of up to 30 two-sided originals.
●
An optional finisher allows automatic stapling of up to 30 sheets.
●
This copier can be used as a laser printer if an optional printer expansion kit is
installed.
installed.
●
This copier can be used as a facsimile machine if an optional facsimile
expansion kit is installed.
expansion kit is installed.
●
This copier can be used as a network scanner if an optional network scanner
expansion kit is installed.
expansion kit is installed.
6
Environmentally friendly design
●
Centre tray is housed in the copier for saving space.
●
Preheat and auto power shut-off modes are provided to reduce power
consumption when the machine is not in active use, and meet the ENERGY
STAR guidelines.
consumption when the machine is not in active use, and meet the ENERGY
STAR guidelines.
As an
E
NERGY
S
TAR
®
Partner, SHARP has determined
that this product meets the
E
NERGY
S
TAR
®
guidelines for
energy efficiency.
Cover1_2SUK.book 11 ページ 2001年5月24日 木曜日 午後8時55分
12
GE
T
T
IN
G
S
T
T
ARTE
D
PART NAMES AND FUNCTIONS
Exterior
Platen cover (optional) (p. 24)
Place an original on the platen glass and close
the platen cover before copying starts.
Place an original on the platen glass and close
the platen cover before copying starts.
Platen glass (p. 24)
Place an original to be copied here.
Place an original to be copied here.
Power switch (p. 16)
Press to turn copier power on and off.
Press to turn copier power on and off.
Handles
Use to move the copier.
Use to move the copier.
Operation panel (p. 14)
All copier controls are located here for easy
operation.
All copier controls are located here for easy
operation.
Centre tray
Finished copies are deposited in the centre tray.
Finished copies are deposited in the centre tray.
Front cover (p. 68)
Open to remove misfeeds and for copier
servicing.
Open to remove misfeeds and for copier
servicing.
Paper trays (p. 78)
Each tray holds 500 sheets of copy paper.
Each tray holds 500 sheets of copy paper.
Upper exit area cover (p. 73)
Open to remove misfeeds when an optional job
separator tray kit or finisher is installed.
Open to remove misfeeds when an optional job
separator tray kit or finisher is installed.
Side cover (p. 67)
Open to remove misfeeds.
Open to remove misfeeds.
Side cover handle (p. 67)
Pull to open the side cover.
Pull to open the side cover.
Bypass tray paper guides (p. 37)
Adjust to the width of the copy paper.
Adjust to the width of the copy paper.
Bypass tray (p. 36)
Paper including special paper (such as
transparency film) can be fed from the bypass
tray.
Paper including special paper (such as
transparency film) can be fed from the bypass
tray.
Bypass tray extension (p. 36)
Pull out when feeding large paper such as A4R,
B4 and A3 (8-1/2" x 11"R, 8-1/2" x 14" and 11"
x 17").
Pull out when feeding large paper such as A4R,
B4 and A3 (8-1/2" x 11"R, 8-1/2" x 14" and 11"
x 17").
Cover1_2SUK.book 12 ページ 2001年5月24日 木曜日 午後8時55分
PART NAMES AND FUNCTIONS
13
1
GE
T
T
IN
G
S
T
T
ARTE
D
Interior
Toner cartridge lock release lever (p. 82)
Use to unlock the toner cartridge.
Use to unlock the toner cartridge.
Toner cartridge (p. 82)
Contains toner.
Contains toner.
Roller rotating knob (p. 69)
Turn to remove misfed paper.
Turn to remove misfed paper.
Photoconductive drum
Copy images are formed on the photocon-
ductive drum.
Copy images are formed on the photocon-
ductive drum.
Fusing unit release levers (p. 70)
Lower to remove misfed paper.
Lower to remove misfed paper.
WARNING:
The fusing unit is hot. Take care in re-
moving paper.
moving paper.
Paper guide (p. 71)
Open to remove misfed paper.
Open to remove misfed paper.
Accessories
Operation manual . . . . . . . . . . . . . . . 1
Toner cartridge . . . . . . . . . . . . . . . . . 1
Cover1_2SUK.book 13 ページ 2001年5月24日 木曜日 午後8時55分
PART NAMES AND FUNCTIONS
14
GE
T
T
IN
G
S
T
T
ARTE
D
Operation panel
COPY key and indicator (p. 76, 84)
Press to select the COPY mode.
Press and hold during standby or during warm-
up to display the total output count and the
quantity of toner remaining.
Press to select the COPY mode.
Press and hold during standby or during warm-
up to display the total output count and the
quantity of toner remaining.
Mode keys and indicators
Use these keys when relevant optional compo-
nents are installed.
Use these keys when relevant optional compo-
nents are installed.
Display
Displays information to assist the operator.
Displays information to assist the operator.
BACK key
Press to return the display to the previous
screen.
Press to return the display to the previous
screen.
Information (
) key (p. 66)
Press to display the detailed description when
is displayed in the upper right-hand corner of
the display.
JOB STATUS key (p. 19)
Press to check the settings of selected functions
or the status of reserved output jobs.
Press to check the settings of selected functions
or the status of reserved output jobs.
OK key
Press to confirm the selected setting or entered
data.
Press to confirm the selected setting or entered
data.
Copy quantity display
Displays the specified copy quantity during
standby and displays the copy countdown as
copies are made.
Displays the specified copy quantity during
standby and displays the copy countdown as
copies are made.
Numeric keys
Use to select the desired copy quantity.
Use to select the desired copy quantity.
INTERRUPT (
) key and indicator (p. 39)
Interrupts a copy run.
CLEAR ALL (CA) key (p. 17)
Clears all selected settings and returns the
copier to the initial settings.
Clears all selected settings and returns the
copier to the initial settings.
START (
) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
Press to start copying.
EXPOSURE key (p. 29)
Use to select the exposure modes: AUTO,
TEXT, TEXT/PHOTO, PHOTO or SUPER
PHOTO.
Use to select the exposure modes: AUTO,
TEXT, TEXT/PHOTO, PHOTO or SUPER
PHOTO.
PAPER SELECT key (p. 24)
Use to manually select a paper tray.
Use to manually select a paper tray.
COPY RATIO key (p. 33)
Press to select a reduction or enlargement copy
ratio.
Press to select a reduction or enlargement copy
ratio.
The indications of the
operation panel may
differ depending on the
country and the region.
operation panel may
differ depending on the
country and the region.
Cover1_2SUK.book 14 ページ 2001年5月24日 木曜日 午後8時55分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.