Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
TWO-SIDED COPYING
27
2
MA
KING COP
IE
S
3
Use the and keys to select one-sided to two-sided copying.
●
Also the 2-SIDED COPY key can be used to select a duplex copy mode.
4
Use the or key to select binding change if desired. Then, press the
OK key.
OK key.
5
Ensure that the desired paper tray is selected.
●
Paper sizes that can be used in the duplex copy mode are A5, B5, B5R, A4, A4R, B4,
A3, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and 11" x 17".
A3, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and 11" x 17".
●
Neither the bypass tray nor 5-1/2" x 8-1/2" paper can be used for duplex copying.
6
Set the number of copies and press the START (
) key.
COPY MODE
BINDING CHANGE
OFF
1 to 1
1 to 2
Cover1_2SUK.book 27 ページ ２００１年５月２４日 木曜日 午後８時５５分
TWO-SIDED COPYING
28
MA
KING COP
IE
S
7
Place the second original face down on the platen glass and press the
START (
START (
) key again.
●
To stop a copy run during duplex copying, press the CLEAR (C) key.
●
To cancel the duplex copy mode, press the 2-SIDED COPY key, select the one-sided to
one-sided mode, and press the OK key.
one-sided mode, and press the OK key.
●
If an uneven number of originals are being copied, press the READ-END key after the
last original is scanned. The last copy will be output single-sided.
last original is scanned. The last copy will be output single-sided.
Cover1_2SUK.book 28 ページ ２００１年５月２４日 木曜日 午後８時５５分
29
2
MA
KING COP
IE
S
EXPOSURE ADJUSTMENT
This copier has five exposure modes to choose from: AUTO, TEXT, TEXT/PHOTO, PHOTO, and
SUPER PHOTO.
SUPER PHOTO.
Auto
This is the standard initial setting for this copier. In this mode, the characteristics of an original being
copied are "read" by the exposure system, and exposure adjustments are made automatically. This
optimizes the contrast of the copied images by reducing the effect of coloured or shaded background
areas.
copied are "read" by the exposure system, and exposure adjustments are made automatically. This
optimizes the contrast of the copied images by reducing the effect of coloured or shaded background
areas.
Text, text/photo, photo, and super photo
Text mode: This mode is useful for enhancing very low density areas of an original or suppressing
unusually high-density background areas.
Text/photo mode: This mode provides the best balance for copying an original which contains both
text and photos. This mode is also useful for copying printed photographs.
Photo mode: This mode is good for copying photographs with fine details.
Super photo mode: This is a high resolution mode (1200 dpi) for providing the best copies of
photographs.
unusually high-density background areas.
Text/photo mode: This mode provides the best balance for copying an original which contains both
text and photos. This mode is also useful for copying printed photographs.
Photo mode: This mode is good for copying photographs with fine details.
Super photo mode: This is a high resolution mode (1200 dpi) for providing the best copies of
photographs.
1
Press the EXPOSURE key.
●
The exposure adjustment screen will appear.
2
Use the and keys to select "TEXT", "TEXT/PHOTO", "PHOTO" or
"SUPER PHOTO" depending on the type of original to be copied.
"SUPER PHOTO" depending on the type of original to be copied.
●
Also the EXPOSURE key can be used to select an exposure mode.
100%
100%
AUTO
EXPOSURE
TEXT
TEXT/PHOTO
TEXT/PHOTO
AUTO
AUTO
Cover1_2SUK.book 29 ページ ２００１年５月２４日 木曜日 午後８時５５分
EXPOSURE ADJUSTMENT
30
MA
KING COP
IE
S
3
Use the and keys to adjust the copy density as desired.
●
Copy density cannot be adjusted manually in the AUTO exposure mode.
4
Press the OK key.
●
To return to the AUTO mode, press the EXPOSURE key, use the and key to select
"AUTO", and press the OK key.
"AUTO", and press the OK key.
NOTE:
When the SUPER PHOTO mode is selected, the copy ratio is limited to be within the 50% to
200% range when copying from the platen glass and within the 50% to 141% range when using
an optional SPF or RSPF.
When the SUPER PHOTO mode is selected, the copy ratio is limited to be within the 50% to
200% range when copying from the platen glass and within the 50% to 141% range when using
an optional SPF or RSPF.
EXPOSURE
AUTO
TEXT/PHOTO
AUTO
TEXT
Cover1_2SUK.book 30 ページ ２００１年５月２４日 木曜日 午後８時５５分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.