Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
31
2
MA
KING COP
IE
S
REDUCTION/
ENLARGEMENT/ZOOM
ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE key or
manually with the COPY RATIO key. The zoom function enables precise copy ratio selection from 25%
to 400% in 1% increments.
manually with the COPY RATIO key. The zoom function enables precise copy ratio selection from 25%
to 400% in 1% increments.
●
The allowable copy ratio range is limited to the following conditions:
Automatic selection
●
When the auto image function is enabled, the reduction or enlargement ratio cannot be selected
manually.
manually.
1
Place an original on the platen glass and close the platen cover.
●
The original size will be automatically detected and indicated in the display. If the original
is a non-standard size, it cannot be detected. In this case, press the SPECIAL
FUNCTION key to enter the original size. See page 24.
is a non-standard size, it cannot be detected. In this case, press the SPECIAL
FUNCTION key to enter the original size. See page 24.
2
Use the PAPER SELECT key to select the paper tray with the desired
paper size.
paper size.
●
This feature will not work when copy paper of non-standard size is used.
Exposure mode
Location of original
Copy ratio range
Other than SUPER PHOTO
SPF/RSPF (optional)
50% to 200%
SUPER PHOTO
Platen glass
50% to 200%
SUPER PHOTO
SPF/RSPF (optional)
50% to 141%
Cover1_2SUK.book 31 ページ 2001年5月24日 木曜日 午後8時55分
REDUCTION/ENLARGEMENT/ZOOM
32
MA
KING COP
IE
S
3
Press the AUTO IMAGE key.
●
The copy ratio will be automatically set.
●
If the original and the selected copy paper are not in the same orientation, the image will
be automatically rotated to match the copy paper. However, if enlargement is selected for
copying onto a paper size larger than A4 (8-1/2" x 11"), the image will not be rotated. In
this case a message indicating "Image edge loss" will appear.
be automatically rotated to match the copy paper. However, if enlargement is selected for
copying onto a paper size larger than A4 (8-1/2" x 11"), the image will not be rotated. In
this case a message indicating "Image edge loss" will appear.
★
KEY OPERATOR Rotation of the image can be disabled using a key operator program.
See page 128.
See page 128.
●
If the message "Image edge loss" is displayed, part of the original image may not be
copied.
copied.
4
Enter the number of copies and press the START (
) key.
●
To cancel the automatic reduction/enlargement mode, press the AUTO IMAGE key
again.
again.
●
When copying from an optional SPF or RSPF, the automatic reduction/enlargement
feature will be effective only for the current copy run.
feature will be effective only for the current copy run.
Cover1_2SUK.book 32 ページ 2001年5月24日 木曜日 午後8時55分
REDUCTION/ENLARGEMENT/ZOOM
33
2
MA
KING COP
IE
S
Manual selection
1
Place an original on the platen glass and close the platen cover.
2
Press the COPY RATIO key.
●
The copy ratio adjustment screen will appear.
3
Use the and keys to select a preset copy ratio or use the and
keys to select a zoom ratio.
keys to select a zoom ratio.
A.Preset reduction ratios are: 86%, 81%, 70%, 50%, and 25% (95%, 77%, 64%, 50%,
and 25%).
B.Preset enlargement ratios are: 115%, 122%, 141%, 200%, and 400% (121%, 129%,
141%, 200%, and 400%).
C.Zoom ratios: Any ratio from 25% to 400% can be set, in 1% increments. Use the
and keys to set the approximate ratio, then press the key to decrease the ratio
or the key to increase the ratio.
or the key to increase the ratio.
●
To decrease or increase the zoom ratio rapidly, press and hold down the or key.
However the value will stop at the preset reduction or enlargement ratios. To move
beyond these ratios, release the key and then press and hold it down again.
However the value will stop at the preset reduction or enlargement ratios. To move
beyond these ratios, release the key and then press and hold it down again.
D.Same-size reset: Press the or key repeatedly until the copy ratio returns to
100%.
NOTE:
If the COPY RATIO key is pressed, the copy ratio will be reset to 100%.
If the COPY RATIO key is pressed, the copy ratio will be reset to 100%.
86%
ZOOM
AUTO
COPY RATIO
115%
100%
100%
Cover1_2SUK.book 33 ページ 2001年5月24日 木曜日 午後8時55分
REDUCTION/ENLARGEMENT/ZOOM
34
MA
KING COP
IE
S
4
Press the OK key.
●
The display will return to the basic screen.
5
Ensure that the desired paper tray is selected.
●
If the auto paper select function has been enabled, the appropriate copy paper size will
have been automatically selected based on the original size and the selected copy ratio.
have been automatically selected based on the original size and the selected copy ratio.
●
If the auto paper select function has been disabled or if copying onto a different size
paper, use the PAPER SELECT key to select the paper feed station with the desired
paper size.
paper, use the PAPER SELECT key to select the paper feed station with the desired
paper size.
6
Set the number of copies and press the START (
) key.
Cover1_2SUK.book 34 ページ 2001年5月24日 木曜日 午後8時55分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.