Sharp AR-206 (serv.man7) User Manual / Operation Manual ▷ View online
19
MAKING COPIES
4
Press the TRAY SELECT (
) key to select the bypass
tray.
5
Leave the copy quantity at 0 if using special papers. Set
the number of copies if using standard copy paper or
envelopes.
the number of copies if using standard copy paper or
envelopes.
6
Press the START (
) key.
BYPASS FEED (special paper)
Bypass feed (special paper)
20
MAKING COPIES
TWO-SIDED COPYING
Automatic two-sided copying can be made with this copier. For two-sided
copying from the original table, follow the procedure below. Fully automatic
two-sided copies can be made from one-sided originals if either an optional
single pass feeder (SPF) or an optional reversing single pass feeder (RSPF)
is installed. See page 58. Additionally, fully automatic two-sided copying of
two-sided originals or one-sided copying of two-sided originals can be made
if an optional reversing single pass feeder is installed. See page 60.
copying from the original table, follow the procedure below. Fully automatic
two-sided copies can be made from one-sided originals if either an optional
single pass feeder (SPF) or an optional reversing single pass feeder (RSPF)
is installed. See page 58. Additionally, fully automatic two-sided copying of
two-sided originals or one-sided copying of two-sided originals can be made
if an optional reversing single pass feeder is installed. See page 60.
Two-sided copying
1
Place the first original face down on the original table
and close the platen cover.
and close the platen cover.
2
Press the ORIGINAL TO COPY key to select one-sided to
two-sided (
two-sided (
) copying.
3
Ensure that the desired paper tray is selected.
●
Paper sizes that can be used in the duplex mode are A5, A4, A4R, B4
and A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and
11" x 17").
and A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and
11" x 17").
●
5-1/2" x 8-1/2" size paper cannot be used in the duplex mode.
●
The bypass tray cannot be used in the duplex mode.
4
Press the START (
) key.
●
The
indicator will blink.
●
The copy will not be output until both sides have been scanned.
21
MAKING COPIES
TWO-SIDED COPYING
Two-sided copying
5
Place the second original face down on the original
table and press the START (
table and press the START (
) key again to copy onto
the other side.
●
To stop a copy run during duplex copying, press the CLEAR (
)
key.
●
If an uneven number of originals are set, press the ORIGINAL TO
COPY key at the end of the copy run to output the last copy.
COPY key at the end of the copy run to output the last copy.
●
To cancel the duplex copy mode, press the ORIGINAL
TO COPY key repeatedly until the indicators in the
ORIGINAL TO COPY section all go out.
ORIGINAL TO COPY section all go out.
●
The image of every front side can be rotated 180°
using the image rotation feature. This feature is
useful when the originals and copies are in the
landscape (horizontal) orientation and the two-sided
copies are to be read by turning them left to right
rather than top to bottom.
To set this feature, see page 62.
useful when the originals and copies are in the
landscape (horizontal) orientation and the two-sided
copies are to be read by turning them left to right
rather than top to bottom.
To set this feature, see page 62.
22
MAKING COPIES
1
Place the original on the original table and close the
platen cover.
platen cover.
2
Press the XY-ZOOM (
) key.
●
The current value for the vertical direction will be displayed in the
copy quantity display.
copy quantity display.
3
Use the PRESET RATIO selector (
,
) keys and zoom
(
,
) keys to change the copy ratio in the vertical
direction.
●
Press a PRESET RATIO selector (
or
) key to set an approximate
ratio, then press the
key to decrease the ratio or
key to increase
the ratio. The copy ratio will be displayed in the copy quantity display.
4
Press the copy ratio display (
) key.
●
The selected ratio for the vertical direction will be entered and the
current value for the horizontal direction will be displayed in the copy
quantity display.
current value for the horizontal direction will be displayed in the copy
quantity display.
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be
changed independently. This feature cannot be used with the 2 in 1 or 4 in 1
feature. (The 2 in 1 or 4 in 1 feature can only be used when an optional
electronic sorting kit and an optional SPF or RSPF are installed.)
To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
changed independently. This feature cannot be used with the 2 in 1 or 4 in 1
feature. (The 2 in 1 or 4 in 1 feature can only be used when an optional
electronic sorting kit and an optional SPF or RSPF are installed.)
To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
XY zoom
Original
Copy
Click on the first or last page to see other AR-206 (serv.man7) service manuals if exist.