Sharp AR-206 (serv.man7) User Manual / Operation Manual ▷ View online
15
MAKING COPIES
●
For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO (
PHOTO (
/
/
) key to select MANUAL (
) and adjust
with the light (
) and dark (
) keys as desired.
6
Set the number of copies using the numeric keys.
●
A single copy can be made with the initial setting, i.e., when “0” is
displayed.
displayed.
●
Press the CLEAR (
) key to clear an entry if a mistake is made.
7
Press the START (
) key.
●
The number in the copy quantity display will decrease by 1 each time
a copy is made.
a copy is made.
●
Press the CLEAR (
) key to stop copying in the middle of a run.
●
To repeat the same copy sequence for a different original, simply
replace the original and press the START (
replace the original and press the START (
) key.
●
If the paper in the selected tray runs out during the copy run and no
other tray contains the same size paper, the bypass tray can be selected
using the TRAY SELECT (
other tray contains the same size paper, the bypass tray can be selected
using the TRAY SELECT (
) key.
How to remove the platen cover
The platen cover can be removed to allow copying of
bulky objects. To remove it, simply lift the platen cover
straight up.
bulky objects. To remove it, simply lift the platen cover
straight up.
●
To reattach the platen cover, reverse the above procedure.
NORMAL COPYING
●
For photographs, select PHOTO (
) and then adjust with the light
(
) and dark (
) keys as desired.
●
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
Normal copying
16
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE (
the AUTO IMAGE (
) key or manually with the PRESET RATIO
selector (
,
) keys and/or the zoom (
,
) keys. The zoom function
enables precise copy ratio selection from 50% to 200% in 1% increments.
Reduction/enlargement/zoom
Automatic
1
Place the original on the original table and close the
platen cover.
platen cover.
●
The ORIGINAL SIZE indicator for the detected size will light up.
2
Use the TRAY SELECT (
) key to select the paper tray
with the desired paper size.
●
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
used or the bypass tray is used.
3
Press the AUTO IMAGE (
) key.
●
The copy ratio will be automatically set.
●
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
may not be copied.
If user program No.7 is not set and the orientation of the
original does not correspond to standard reduction/
enlargement ratios for the selected paper tray, the
ORIGINAL SIZE indicator will blink. Change the
orientation of the original.
original does not correspond to standard reduction/
enlargement ratios for the selected paper tray, the
ORIGINAL SIZE indicator will blink. Change the
orientation of the original.
However, if an optional electronic sorting kit is installed,
the original image may be automatically rotated.
4
Set the number of copies.
5
Press the START (
) key.
●
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE (
mode, press the AUTO IMAGE (
) key again.
●
When copying from an optional SPF or RSPF with
this feature, the automatic reduction/enlargement
mode will be automatically cancelled after copying is
complete.
this feature, the automatic reduction/enlargement
mode will be automatically cancelled after copying is
complete.
17
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction/enlargement/zoom
Manual
1
Place the original on the original table and close the
platen cover.
platen cover.
2
Use the PRESET RATIO selector (
,
) keys and the
zoom (
,
) keys to select the desired copy ratio.
●
To select a preset reduction or enlargement copy ratio, press the
or
or
key repeatedly until the indicator for the desired copy ratio is
lit.
A.
Preset reduction ratios are: 86%, 81%, 70%, and 50% (95%,
77%, 64%, and 50%).
77%, 64%, and 50%).
B.
Preset enlargement ratios are: 115%, 122%, 141%, and 200%
(121%, 129%, 141%, and 200%).
(121%, 129%, 141%, and 200%).
C.
Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the
increments. Press the
or
key to set the approximate
ratio, then press the
key to decrease the ratio or the
key
to increase the ratio.
●
When a zoom (
,
) key is pressed, the ZOOM indicator will light
up and the zoom ratio will be displayed in the copy quantity display
for at least two seconds.
for at least two seconds.
●
To verify a zoom setting without changing the zoom ratio, press and
hold down the copy ratio display (
hold down the copy ratio display (
) key. When the key is released,
the display will return to the copy quantity display.
●
To decrease or increase the zoom ratio rapidly, press and hold down
the
the
or
key. However the value will stop at the preset reduction
or enlargement ratios. To move beyond these ratios, release the key
and then press and hold it down again.
and then press and hold it down again.
D.
Same-size reset: Press the
or
key repeatedly until the
copy ratio returns to 100%.
3
Ensure that the desired paper tray is selected.
●
If the auto paper select function has been enabled, the appropriate
copy paper size will have been automatically selected based on the
original size and the selected copy ratio. If the selected PRESET
RATIO indicator or the ZOOM indicator blinks, the selected copy
image is too large for the copy paper size.
copy paper size will have been automatically selected based on the
original size and the selected copy ratio. If the selected PRESET
RATIO indicator or the ZOOM indicator blinks, the selected copy
image is too large for the copy paper size.
●
If the auto paper select function has been disabled or if copying onto
a different size paper, use the TRAY SELECT (
a different size paper, use the TRAY SELECT (
) key to select the
paper feed station with the desired paper size.
4
Set the number of copies and press the START (
) key.
18
MAKING COPIES
BYPASS FEED (special paper)
The bypass tray is used to copy onto transparency film, labels, and other
special purpose papers. Up to 100 sheets of standard copy paper can be set
in the bypass tray.
special purpose papers. Up to 100 sheets of standard copy paper can be set
in the bypass tray.
For special purpose papers, the original image must be
smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
Also for standard copy paper, smudges may appear if the
copy paper is not at least as large as the original image.
smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
Also for standard copy paper, smudges may appear if the
copy paper is not at least as large as the original image.
1
Unfold the bypass tray.
●
When feeding B4 or A3 (8-1/2" x 14" or 11" x 17") sized paper, extend
the bypass tray.
the bypass tray.
2
Set the paper guides to the copy paper width.
3
Insert the copy paper (print face down) all the way into
the bypass tray.
the bypass tray.
●
Up to 100 sheets of standard copy paper measuring from A6 to A3
(5-1/2" x 8-1/2" to 11" x 17") can be loaded in the bypass tray.
(5-1/2" x 8-1/2" to 11" x 17") can be loaded in the bypass tray.
●
A6 size paper must be fed narrow side into the feed slot.
●
Transparency film, labels, and other special purpose papers (except
envelopes) must be fed individually.
Up to 10 envelopes can be set.
envelopes) must be fed individually.
Up to 10 envelopes can be set.
●
When adding paper, first remove remaining paper, combine it with the
paper to be added and then reload as a single stack.
paper to be added and then reload as a single stack.
●
When loading envelopes, make sure that they are straight and flat.
Bypass feed (special paper)
Click on the first or last page to see other AR-206 (serv.man7) service manuals if exist.