Sharp AL-2020 (serv.man5) User Manual / Operation Manual ▷ View online
39
4
Flow of the Button Manager setting
The Button Manager can directly handle an AL-xxxx (where xxxx is the model name
of your unit) series device event and start your selected application according to the
scan setting made on the AL-xxxx (where xxxx is the model name of your unit)
operation panel (SC1, SC2, SC3, SC4, SC5, SC6).
This will scan directly into your application from the device.
of your unit) series device event and start your selected application according to the
scan setting made on the AL-xxxx (where xxxx is the model name of your unit)
operation panel (SC1, SC2, SC3, SC4, SC5, SC6).
This will scan directly into your application from the device.
The settings for the Windows Event Manager for
the SHARP AL-xxxx (where xxxx is the model
name of your unit) device allow the user to take
advantage of the Sharp Button Manager to take
control of events from Windows and send
scanned images to any application that can be
selected in Button Manager.
This can be done with the Windows OS showing
the Event Manager selection dialog or directly
into a selected application if the Button Manager
is the only allowed handler for device events
from the SHARP AL-xxxx (where xxxx is the
model name of your unit).
This is done by changing the Windows device
settings for the AL-xxxx (where xxxx is the model
name of your unit) in the Scanner and Camera
device settings in the Control Panel.
the SHARP AL-xxxx (where xxxx is the model
name of your unit) device allow the user to take
advantage of the Sharp Button Manager to take
control of events from Windows and send
scanned images to any application that can be
selected in Button Manager.
This can be done with the Windows OS showing
the Event Manager selection dialog or directly
into a selected application if the Button Manager
is the only allowed handler for device events
from the SHARP AL-xxxx (where xxxx is the
model name of your unit).
This is done by changing the Windows device
settings for the AL-xxxx (where xxxx is the model
name of your unit) in the Scanner and Camera
device settings in the Control Panel.
Scanner
SCAN key
pressed.
pressed.
Event
Manager
Manager
Windows OS
Button
Manager
Manager
No Selection
dialog is
displayed.
dialog is
displayed.
User
selected
application
selected
application
The user
application
opens.
application
opens.
This is the Control Panel
Properties dialog for "Scanners and
Cameras".
The AL-xxxx is shown selected.
Properties dialog for "Scanners and
Cameras".
The AL-xxxx is shown selected.
SHARP AL-xxxx
40
All About The Windows Event Manager and scanner events in
Windows 98, Windows Me, Windows 2000, Windows XP and Windows
Vista
Windows 98, Windows Me, Windows 2000, Windows XP and Windows
Vista
Windows Platforms provide a mechanism for software to handle external events for
a scanner device like the SHARP AL-xxxx (where xxxx is the model name of your
unit) series products. This mechanism is controlled by the device manager on a
device basis. Applications that can handle events from a scanner/camera device
register with the Windows Event Manager and shown as available in the registered
applications. The path an event takes to get to the user's selected application
depends upon the event settings for the device.
a scanner device like the SHARP AL-xxxx (where xxxx is the model name of your
unit) series products. This mechanism is controlled by the device manager on a
device basis. Applications that can handle events from a scanner/camera device
register with the Windows Event Manager and shown as available in the registered
applications. The path an event takes to get to the user's selected application
depends upon the event settings for the device.
Scanner
SCAN key
pressed.
pressed.
Event
Manager
Manager
Windows OS
Event
Manager
selection
dialog
Manager
selection
dialog
Displayed on
screen
screen
User selects
an
application.
an
application.
The user
application
opens.
application
opens.
This is the Windows Event Manager
Selection Dialog.
Shown are two applications registered
to handle the scanner event from
AL-xxxx (where xxxx is the model name
of your unit) device.
Selection Dialog.
Shown are two applications registered
to handle the scanner event from
AL-xxxx (where xxxx is the model name
of your unit) device.
41
4
Using the SCAN key to begin scanning
1
Press the SCAN (
) key.
The unit enters scan mode.
2
Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.47).
(p.47).
3
Press the right copy quantity
key to display the number of
the application that you wish to
use for scanning.
key to display the number of
the application that you wish to
use for scanning.
The application numbers are initially
as follows.
as follows.
To check the settings, see "Scan Button Destination Setting Dialog Box"
(p.38) and then open the settings window of the Button Manager.
(p.38) and then open the settings window of the Button Manager.
• Scanning is not possible during a copy job.
• If the SCAN (
• If the SCAN (
) key is pressed during a print job, the scan job will be
stored.
• When scanning an original that has been placed in the SPF, only one
original can be placed unless you are using Sharpdesk.
Application
number
Application launched
SC1
Sharpdesk
SC2
E-mail
SC3
Fax
SC4
OCR
SC5
Microsoft Word
SC6
Filing
42
4
Press the start (
) key.
Scanning will start and the scanned data will be transferred to the
application.
application.
Opening the scanner driver and scanning from your
computer
computer
Follow the steps below to open the scanner driver setup screen. As an example, this
instruction is given using Sharpdesk as an image capture application.
instruction is given using Sharpdesk as an image capture application.
• If the following screen appears, select
Button Manager and click "OK". Button
Manager starts and the application
associated with Button Manager starts. If
you want only Button Manager to start in
this case, set up Button Manager for use in
Windows as explained in "Setting up the
Button Manager" (p.36).
Manager starts and the application
associated with Button Manager starts. If
you want only Button Manager to start in
this case, set up Button Manager for use in
Windows as explained in "Setting up the
Button Manager" (p.36).
• If step 4 is performed with the "Show
TWAIN setting screen when scanning"
checkbox selected in the Scan Button Destination Setting Dialog Box
(p.38), the TWAIN settings screen (p.43) will automatically appear.
Check the settings, and then press the start (
checkbox selected in the Scan Button Destination Setting Dialog Box
(p.38), the TWAIN settings screen (p.43) will automatically appear.
Check the settings, and then press the start (
) key again or click
the "Scan" button in the TWAIN setting screen to start scanning. The
scanned data will be transferred to the application.
scanned data will be transferred to the application.
• Scanning is not possible during a copy and print job.
• The method for starting the scanner driver differs depending on the
• The method for starting the scanner driver differs depending on the
type of application. Refer to the manual or the help file of your
application.
application.
• When using the scanner driver to scan an original that has been
placed in the SPF. If you perform "preview" (see the online manual or
the help file for the scanner driver), the original in the SPF will be
output to the exit area after previewing. To scan the original after
previewing, place the original in the SPF once again.
the help file for the scanner driver), the original in the SPF will be
output to the exit area after previewing. To scan the original after
previewing, place the original in the SPF once again.
Click on the first or last page to see other AL-2020 (serv.man5) service manuals if exist.