Sharp AL-1611 (serv.man24) User Manual / Operation Manual ▷ View online
27
MAKING COPIES
XY zoom
XY ZOOM
5
Use the PRESET RATIO selector (
,
) keys and zoom
(
,
) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
6
Press the copy ratio display (
) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
(
) key. The vertical and horizontal ratios will be alternately
displayed.
7
Ensure that copy paper of the desired size is installed in
the paper tray.
the paper tray.
●
AL-1622 only Use the ORIGINAL SIZE ENTER key to select the
original size. Copy paper of the appropriate paper size will be
automatically selected based on the original size and copy ratios.
original size. Copy paper of the appropriate paper size will be
automatically selected based on the original size and copy ratios.
8
Set the number of copies.
9
Press the START key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
RATIO selector (
,
) key or a zoom (
,
)
key. Then, perform step 3 and the succeeding
steps.
steps.
●
To cancel this function, press the XY-ZOOM key
again.
again.
28
MAKING COPIES
B/W reverse
Original
Copy
B/W REVERSE
The B/W REVERSE feature is used to reverse black and white areas.
●
When the B/W REVERSE feature is selected, the exposure mode will be
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is cancelled, the MANUAL mode will not
automatically be cancelled.
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is cancelled, the MANUAL mode will not
automatically be cancelled.
1
Place the original on the original table or in the document
feeder tray.
feeder tray.
2
Press the B/W REVERSE key.
3
Check the copy paper size.
●
AL-1622 only Use the ORIGINAL SIZE ENTER key to select the
original size. Copy paper of the same size as the original will be
automatically selected.
original size. Copy paper of the same size as the original will be
automatically selected.
4
Make all other desired copier selections and press the
START key.
START key.
29
MAKING COPIES
Dual page copy
Original
Copy
DUAL PAGE COPY
The DUAL PAGE COPY feature produces individual copies of two documents
placed side by side on the original table. It is especially useful when copying
books and other bound documents. If the AUTO IMAGE feature has been
selected, this feature cannot be selected.
To use the DUAL PAGE COPY feature with the XY ZOOM feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
placed side by side on the original table. It is especially useful when copying
books and other bound documents. If the AUTO IMAGE feature has been
selected, this feature cannot be selected.
To use the DUAL PAGE COPY feature with the XY ZOOM feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
1
Place the originals on the original table with the centre
of the two pages aligned with the paper size index (
A4). Close the platen cover.
of the two pages aligned with the paper size index (
A4). Close the platen cover.
●
Set the page to be copied first to the right of the paper size index mark.
2
Press the DUAL PAGE COPY key.
3
Check the copy paper size.
●
The copy paper size must be A4.
4
Set the number of copies.
5
Press the START key.
30
MAKING COPIES
Interrupting a copy run
INTERRUPTING A COPY RUN
INTERRUPT is used to interrupt a long copy run so that another job can be
done.
done.
1
Press the INTERRUPT key.
●
The copier will return to the initial settings.
●
If this copier has been programmed in the auditing mode using user
program No. 10, “– – – ” will appear in the copy quantity display. Enter
your account number using the numeric keys. The number of copies
of the interrupt copying will be accumulated against this account
number. See page 16.
program No. 10, “– – – ” will appear in the copy quantity display. Enter
your account number using the numeric keys. The number of copies
of the interrupt copying will be accumulated against this account
number. See page 16.
●
With AL-1622, when the SPF is being used, the copier will stop after
completing the copying of the original which has been fed into the
SPF.
completing the copying of the original which has been fed into the
SPF.
2
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying.
the original(s) for interrupt copying.
3
Select the desired available copier functions.
4
Set the number of copies.
5
Press the START key.
6
When all INTERRUPT copies are finished, press the
INTERRUPT key again to cancel the INTERRUPT mode,
and remove the original used for interrupt copying.
INTERRUPT key again to cancel the INTERRUPT mode,
and remove the original used for interrupt copying.
●
The previous copy quantity, copy ratio, copy density, and paper size
will be automatically restored.
will be automatically restored.
7
Replace the original(s) for the interrupted job and press
the START key to resume copying.
the START key to resume copying.
Click on the first or last page to see other AL-1611 (serv.man24) service manuals if exist.