Sharp AL-1611 (serv.man24) User Manual / Operation Manual ▷ View online
43
ST
A
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
Misfeed removal
Misfeed in the lower paper tray (AL-1622
only)
only)
1
Grasp the handle of the lower side cover and gently
open the cover.
open the cover.
2
Remove the misfed paper.
●
Be careful not to tear the misfed paper during removal.
3
If the misfed paper is not seen in step 2, gently lift and
pull out the lower paper tray and remove the misfed
paper.
pull out the lower paper tray and remove the misfed
paper.
●
Be careful not to tear the misfed paper during removal.
4
Close the paper tray.
5
Close the lower side cover.
●
The misfeed (
) indicator will go out.
44
ST
A
A
TUS
INDICA
T
ORS
Misfeed removal
MISFEED REMOVAL
Location C
Roller
Location A
Location B
A
C
B
Feeding roller cover
Right side cover
Misfeed in the SPF (AL-1622 only)
If an original misfeed occurs in the SPF, the copier will
stop and the red indicator which indicates an original
misfeed will blink.
stop and the red indicator which indicates an original
misfeed will blink.
1
Open the feeding roller cover and pull the original gently
to the left and out from the document feeder tray. Close
the feeding roller cover.
to the left and out from the document feeder tray. Close
the feeding roller cover.
2
If the misfed original cannot be removed in step 1, open
the right side cover and remove the misfed original.
Close the right side cover.
the right side cover and remove the misfed original.
Close the right side cover.
3
If the misfed original cannot be removed in steps 1 and
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed.
If the misfed original cannot be easily removed from the
exit area, open the front part of the document feeder tray
to remove the original.
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed.
If the misfed original cannot be easily removed from the
exit area, open the front part of the document feeder tray
to remove the original.
4
Open and close the document feeder cover to cancel the
misfeed location indicator.
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START key to resume copying.
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START key to resume copying.
45
GENERAL INFORMA
TION
User programs
USER PROGRAMS
The user programs allow the parameters of certain functions to be set,
changed, or cancelled as desired.
changed, or cancelled as desired.
List of user programs
This copier has the following user programs.
Program No.
Program name
Description
1
Auto clear time
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
when the auto clear time elapses after the last copy is made.
2
Preheat mode
Sets the time that elapses before the copier enters the preheat
mode after any operation is made. See page 52.
mode after any operation is made. See page 52.
3
Auto power shut-off
Sets the time that elapses before the copier enters the auto power
timer
shut-off mode after any operation is made. See page 52.
4
Stream feeding mode*
Enables or disables the stream feeding mode. See page 20.
5
Auto power shut-off
Enables or disables the auto power shut-off mode. See page 52.
setting
8
Auto paper select
Enables or disables the auto paper selection. See page 7.
mode*
9
Auto tray switching*
Enables or disables the automatic tray switching which occurs when
paper in a tray runs out. (This switching cannot switch to the bypass tray.)
paper in a tray runs out. (This switching cannot switch to the bypass tray.)
10
Auditing mode
Enables or disables the auditing mode, which controls access to
copier. See page 16.
copier. See page 16.
11
Account number
Registers accounts for auditing mode.
entry
12
Account number
Changes account numbers for auditing mode.
change
13
Account number
Deletes accounts for auditing mode.
deletion
14
Number of copies
Displays the total number of copies made against account numbers.
per account
15
Resetting account
Resets all audit accounts or resets any desired individual account.
* AL-1622 only
46
GENERAL INFORMA
TION
Setting the user programs
1
Press and hold the light (
) key for more than 5
seconds until all the alarm indicators (
,
,
, and
) blink and “– –” appears in the copy quantity display.
2
Enter a program number using the numeric keys.
●
The selected program number will blink in the copy quantity display.
●
If a mistake is made in steps 2 to 4, press the CLEAR key. The copier
will return to step 2.
will return to step 2.
●
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off timer,
press key 3.
press key 3.
Program name
Program No.
Auto clear time
1
Preheat mode
2
Auto power shut-off timer
3
Stream feeding mode
4
Auto power shut-off setting
5
Auto paper select mode
8
Auto tray switching
9
Auditing mode
10
Account number entry
11
Account number change
12
Account number deletion
13
Number of copies per account
14
Resetting account
15
USER PROGRAMS
User programs
For operation of these programs after
step 3, see page 48.
step 3, see page 48.
3
Press the START key.
●
For programs 1 to 9, the entered program number will be steadily lit
on the left side of the copy quantity display and the currently selected
parameter number for the program will blink on the right side.
on the left side of the copy quantity display and the currently selected
parameter number for the program will blink on the right side.
●
For programs 10 to 15 (programs for auditing accounts), the display
varies with the program number. See page 48 for setting programs 10
to 15.
varies with the program number. See page 48 for setting programs 10
to 15.
Click on the first or last page to see other AL-1611 (serv.man24) service manuals if exist.