DOWNLOAD Sharp AL-1611 (serv.man24) Service Manual ↓ Size: 2.2 MB | Pages: 80 in PDF or view online for FREE

Model
AL-1611 (serv.man24)
Pages
80
Size
2.2 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Operation Manual
File
al-1611-sm24.pdf
Date
PREV: Sharp AL-1611 (serv.man23) Service Manual / Parts Guide

Sharp AL-1611 (serv.man24) User Manual / Operation Manual ▷ View online

47
GENERAL INFORMA
TION
USER PROGRAMS
User programs
4
Select the desired parameter using the numeric keys.
●
The entered parameter number will blink on the right side of the copy
quantity display.
●
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
If you select “0” (OFF) in a program, the corresponding
function will be disabled.
5
Press the START key.
●
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6
To continue with other user programs, press the 
 key
and then repeat steps 2 to 5. To exit the user program
mode, press the light (
) key.
●
All the alarm indicators will go out.
Program name
Parameters
Auto clear time
0 
 OFF
1 
 30 sec.
* 2 
 60 sec.
3 
 90 sec.
4 
 120 sec.
5 
 10 sec.
Preheat mode
0 
 OFF
1 
 30 sec.
2 
 60 sec.
* 3 
 90 sec.
4 
 120 sec.
Auto power shut-off timer
* 1 
 30 min.
2 
 60 min.
3 
 90 min.
4 
 120 min.
5 
 240 min.
Stream feeding mode
* 0 
 OFF
1 
 ON
Auto power shut-off setting
0 
 OFF
* 1 
 ON
Auto paper select mode
0 
 OFF
* 1 
 ON
Auto tray switching
0 
 OFF
* 1 
 ON
●
Factory default settings are indicated with an asterisk (*).
48
GENERAL INFORMA
TION
USER PROGRAMS
User programs
Settings for auditing accounts
Settings of user programs No. 10 to 15 varies with the program number. For
setting of all programs, first follow steps 1 to 3 in “Setting the user programs”
on page 46 to select a program. (1. Press the light (
) key for more than 5
seconds. 2. Enter a program number (10 to 15) using the numeric keys. 3.
Press the START key.) Then follow the appropriate instructions for the
program.
Program No. 10: Auditing mode
If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account
numbers can be assigned. Use program No. 11 to register account numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON) will
blink on the right side of the copy quantity display.
1.
Select the desired setting using the numeric keys.
0:
OFF
1:
ON
2.
Press the START key.
●
The setting will be stored.
3.
To continue with other user programs, press the 
 key
and enter another program number. To exit the user
program mode, press the light (
) key.
Program No. 11: Account number entry
Program No. 11 is used to register accounts. When program No. 11 is entered,
“– – –” will blink in the copy quantity display.
●
If the number of accounts has reached the upper limit (20), “11E” will
appear in the copy quantity display. Press the 
 key. The copier will
return to step 2 on page 46.
1.
Enter a 3-digit account number using the numeric keys.
●
Any 3-digit number except “000” can be registered as an account
number.
2.
Press the START key.
●
If a number that is already registered or “000” is entered, the number
will blink in the copy quantity display.
3.
Repeat steps 1 and 2 for other account numbers.
4.
To continue with other user programs, press the 
 key
and enter another program number. To exit the user
program mode, press the light (
) key.
49
GENERAL INFORMA
TION
USER PROGRAMS
User programs
Program No. 12: Account number change
Program No. 12 is used to change account numbers. When program No. 12
is entered, an account number will appear in the copy quantity display.
●
If no account number has been registered, “12E” will appear in the copy
quantity display. Press the 
 key. The copier will return to step 2 on page
46.
1.
Use the copy ratio display (
) key to select the account
number to be changed.
●
Use the 
 key to advance through the account numbers.
2.
Press the START key.
●
The account number will be erased and “– – –” will blink in the copy
quantity display.
3.
Enter a new account number using the numeric keys.
4.
Press the START key.
●
If a number that is already registered or “000” is entered, the number
will blink in the copy quantity display.
5.
Repeat steps 1 to 4 for other account numbers.
6.
To continue with other user programs, press the 
 key
and enter another program number. To exit the user
program mode, press the light (
) key.
Program No. 13: Account number deletion
Program No. 13 is used to delete accounts. When program No. 13 is entered,
“0” will blink on the right side of the copy quantity display.
●
If no account number has been registered, “13E” will appear in the copy
quantity display. Press the 
 key. The copier will return to step 2 on page
46.
1.
To delete an individual account, press the 0 key.
To delete all accounts, press key 1.
2.
Press the START key.
●
If you have pressed the 0 key in step 1, an account number will appear
in the copy quantity display. Proceed to step 3.
●
If you have pressed key 1, all account numbers will be deleted.
Proceed to step 5.
3.
Use the copy ratio display (
) key to select the account
number to be deleted.
●
Use the 
 key to advance through the account numbers.
4.
Press the START key.
●
The specified account will be deleted.
5.
To continue with other user programs, enter another
program number. To exit the user program mode, press
the light (
) key.
50
GENERAL INFORMA
TION
User programs
USER PROGRAMS
Program No. 14: Number of copies per account
Program No. 14 is used to display the total number of copies made against
each account number. When program No. 14 is entered, an account number
will appear in the copy quantity display.
●
If no account number has been registered, “14E” will appear in the copy
quantity display. Press the 
 key. The copier will return to step 2 on page
46.
1.
Use the copy ratio display (
) key to select the account
number.
●
Use the 
 key to advance through the account numbers.
2.
Press and hold down the 0 key.
●
The number of copies made against the specified account number will
be displayed. The two higher digits and the three lower digits will
appear alternately while the 0 key is pressed.
Example: 1,234 copies
●
The upper limit for the number of copies is 49,999. If the number of
copies made reaches 50,000, the number will be reset to 0 and counting
will start again from 0.
3.
Repeat steps 1 and 2 for other account numbers.
4.
To continue with other user programs, press the 
 key
and select another program number. To exit the user
program mode, press the light (
) key.
Page of 80
Display

Click on the first or last page to see other AL-1611 (serv.man24) service manuals if exist.

RANDOM: