Sharp AL-1611 (serv.man24) User Manual / Operation Manual ▷ View online
39
ST
A
A
TUS
INDICA
T
ORS
The copier will stop when a misfeed occurs. The misfeed
(
(
) indicator will blink, and blinking red misfeed location
indicators will indicate the approximate misfeed location.
If paper is accidentally torn during removal, be sure to
remove all pieces.
Be careful not to damage the photoconductive drum.
remove all pieces.
Be careful not to damage the photoconductive drum.
MISFEED REMOVAL
Misfeed removal
(
P. 39, 42)
First confirm the misfeed location.
(
P. 44)
(
P. 43)
(
P. 39, 42)
AL-1611
AL-1622
Misfeed in the bypass tray
1
Gently pull the misfed paper out.
2
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
until it stops. Close the side cover by pressing the
handle on the cover.
●
The misfeed (
) indicator will go out.
Misfeed in the copier
1
Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
slide the cover out until it stops.
40
ST
A
A
TUS
INDICA
T
ORS
If the misfed paper is seen from this
side, proceed to “C. Misfeed in the
transport area”.
side, proceed to “C. Misfeed in the
transport area”.
If paper is misfed here, proceed to
“B. Misfeed in the fusing area”.
“B. Misfeed in the fusing area”.
If paper is misfed here, proceed to
“A. Misfeed in the paper feed area”.
“A. Misfeed in the paper feed area”.
2
Check the misfeed location. Remove the misfed paper
following the instructions for each location in the
illustration below.
following the instructions for each location in the
illustration below.
Roller rotating knob
A.
Misfeed in the paper feed area
1
Push gently on both sides of the front cover and open it.
2
Carefully remove the misfed paper. Turn the roller
rotating knob in the direction of the arrow to assist in
removing it.
rotating knob in the direction of the arrow to assist in
removing it.
The fusing unit is hot. Take care in removing paper.
Do not touch the surface of the drum (green portion) of
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
3
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
hands and then close the side cover by pressing the
handle on the cover.
●
The misfeed (
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
B.
Misfeed in the fusing area
1
Push gently on both sides of the front cover and open it.
MISFEED REMOVAL
Misfeed removal
41
ST
A
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
Misfeed removal
2
Turn the roller rotating knob in the direction of the
arrow.
arrow.
3
Carefully remove the misfed paper. Lower the fusing
unit release levers to allow easier removal. Return the
release levers to their operating positions.
unit release levers to allow easier removal. Return the
release levers to their operating positions.
The fusing unit is hot. Take care in removing paper.
●
Do not touch the surface of the drum (green portion) of
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
●
Be careful about unfixed toner on the misfed paper not
to soil your hands or clothes.
to soil your hands or clothes.
4
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
hands and then close the side cover by pressing the
handle on the cover.
●
The misfeed (
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
C.
Misfeed in the transport area
1
Open the paper guide by pressing down the projection
on either side of the guide and remove the misfed paper.
on either side of the guide and remove the misfed paper.
The fusing unit is hot. Take care in removing paper.
2
If the misfed paper cannot be removed by the previous
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
Roller rotating knob
Fusing unit release lever
42
ST
A
A
TUS
INDICA
T
ORS
3
Close the side cover by pressing the handle on the
cover.
cover.
●
The misfeed (
) indicator will go out.
Misfeed in the paper tray (upper paper tray
in AL-1622)
in AL-1622)
Before opening the paper tray, be sure to confirm that there is no misfed paper
in the copier. See page 39.
in the copier. See page 39.
1
Gently lift and pull out the paper tray and remove the
misfed paper.
misfed paper.
2
Close the paper tray.
3
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
until it stops. Close the side cover by pressing the
handle on the cover.
●
The misfeed (
) indicator will go out.
MISFEED REMOVAL
Misfeed removal
Click on the first or last page to see other AL-1611 (serv.man24) service manuals if exist.