Sharp AL-1611 (serv.man24) User Manual / Operation Manual ▷ View online
15
GETTING ST
AR
TED
Loading cop
y paper
LOADING COPY PAPER
8
To set the selected paper size, press the PAPER SIZE
ENTER key.
ENTER key.
●
The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators except the START key indicator will
go out.
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators except the START key indicator will
go out.
If copying is being performed, paper size setting
cannot be made .
cannot be made .
9
AL-1622 only Use the TRAY SELECT key to select the
paper tray of which the paper size has been changed.
paper tray of which the paper size has been changed.
●
Each time the TRAY SELECT key is pressed, a paper tray will be
indicated with a blinking paper feed location indicator.
indicated with a blinking paper feed location indicator.
10
Use the ORIGINAL SIZE ENTER key to select the paper
size which is set in the paper tray.
size which is set in the paper tray.
●
Each time the ORIGINAL SIZE ENTER key is pressed, a paper size
will be indicated with a paper size indicator.
will be indicated with a paper size indicator.
11
Press the START key and then the PAPER SIZE ENTER
key.
key.
●
AL-1622 only To change the paper size setting of the other tray,
repeat steps 9 to 10 after pressing the START key.
repeat steps 9 to 10 after pressing the START key.
16
MAKING COPIES
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not function
until an assigned 3-digit account number has been entered. See page 48 for
setting the auditing mode.
until an assigned 3-digit account number has been entered. See page 48 for
setting the auditing mode.
If the copier has been programmed in the auditing mode, “– – – ” will appear
in the copy quantity display in the initial conditions.
in the copy quantity display in the initial conditions.
1
Enter your account number using the numeric keys.
●
As each digit is entered, the dashes in the copy quantity display will
disappear.
disappear.
●
After the number is entered, the copy quantity display will change
to 0.
to 0.
●
If an unassigned number is entered, “– – – ” will appear again in the
copy quantity display, indicating that the number was not accepted.
copy quantity display, indicating that the number was not accepted.
2
When copying is completed, press the AUDIT CLEAR
key.
key.
●
“– – – ” will appear again in the copy quantity display, indicating the
auditing mode.
auditing mode.
●
In the interrupt copy mode (see page 30), press the INTERRUPT key
after an interrupt copy run is completed. All previous copier settings
will be restored and the previous account number will be active.
after an interrupt copy run is completed. All previous copier settings
will be restored and the previous account number will be active.
Auditing accounts
17
MAKING COPIES
NORMAL COPYING
Normal copying
Power on
Using the original table
1
Turn the power switch on.
●
It will take about 35 seconds for the copier to warm up. However, you
can make desired settings and press the START key during warm-up.
Copying will start after warm-up.
can make desired settings and press the START key during warm-up.
Copying will start after warm-up.
●
If the copier has been programmed in the auditing mode, the START
key indicator will not light up and “– – – ” will appear in the copy
quantity display. Enter an assigned 3-digit account number. See page
16.
key indicator will not light up and “– – – ” will appear in the copy
quantity display. Enter an assigned 3-digit account number. See page
16.
2
Place the original face down on the original table. Align
it with the original size scale.
it with the original size scale.
●
Image loss (max. 4 mm) can occur at the leading and trailing edges of
the copies. Also image loss (max. 4 mm in total) can occur along the
other edges of the copies.
the copies. Also image loss (max. 4 mm in total) can occur along the
other edges of the copies.
3
Close the document feeder cover or the platen cover.
4
Ensure that the copy paper size in the paper tray is the
same size as the original.
same size as the original.
●
AL-1622 only Use the ORIGINAL SIZE ENTER key to select the
original size. Copy paper of the same size as the original will be
automatically selected. If desired, another paper tray can be selected
by pressing the TRAY SELECT key.
original size. Copy paper of the same size as the original will be
automatically selected. If desired, another paper tray can be selected
by pressing the TRAY SELECT key.
●
If paper of the required size is not loaded in the paper tray, use the
bypass tray and press the TRAY SELECT key to select the bypass tray.
bypass tray and press the TRAY SELECT key to select the bypass tray.
5
Adjust the copy density.
●
This copier has three exposure modes to choose from — AUTOMATIC,
MANUAL, and PHOTO.
MANUAL, and PHOTO.
●
Automatic exposure is the standard initial setting for this copier. In this
mode, the characteristics of the original are “read” by the exposure
system and adjustments are automatically made. This optimizes the
contrast of the copied images by reducing the effect of coloured or
shaded background areas. See page 31 to adjust the automatic exposure
level.
mode, the characteristics of the original are “read” by the exposure
system and adjustments are automatically made. This optimizes the
contrast of the copied images by reducing the effect of coloured or
shaded background areas. See page 31 to adjust the automatic exposure
level.
18
MAKING COPIES
NORMAL COPYING
Normal copying
●
For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO key to select MANUAL and adjust with the light (
PHOTO key to select MANUAL and adjust with the light (
) and
dark (
) keys as desired.
●
For photographs, select PHOTO and then adjust with the light (
)
and dark (
) keys as desired.
●
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
6
Set the number of copies using the numeric keys.
●
A single copy can be made with the initial setting, i.e., when “0” is
displayed.
displayed.
●
Press the CLEAR key to clear an entry if a mistake is made.
7
Press the START key.
●
The number in the copy quantity display will decrease by 1 each time
a copy is made.
a copy is made.
●
Press the CLEAR key to stop copying in the middle of a run.
●
To repeat the same copy sequence for a different original, simply
replace the original and press the START key.
replace the original and press the START key.
●
If the paper in the paper tray runs out during the copy run, and no other
trays contains the same size paper, the bypass tray can be selected
using the TRAY SELECT key.
trays contains the same size paper, the bypass tray can be selected
using the TRAY SELECT key.
How to remove the platen cover (AL-1611 only)
The platen cover can be removed to allow copying of
bulky objects. To remove it, simply lift the platen cover
straight up.
bulky objects. To remove it, simply lift the platen cover
straight up.
●
To reattach the platen cover, reverse the above procedure.
Click on the first or last page to see other AL-1611 (serv.man24) service manuals if exist.