Sharp AL-1611 (serv.man24) User Manual / Operation Manual ▷ View online
11
GETTING ST
AR
TED
SET-UP
Set-up
1
Remove all pieces of tape, then open the document
feeder cover or the platen cover and remove the
protective material.
feeder cover or the platen cover and remove the
protective material.
2
Use a coin (or other suitable object) to remove the
screw.
screw.
Store the screw in the paper tray as described in step
6 because it must be used if the copier has to be moved.
(p. 61)
6 because it must be used if the copier has to be moved.
(p. 61)
3
Install the TD cartridge.
●
For installation of the TD cartridge, see steps 1 and 2 and steps 4 to 7
of TD CARTRIDGE REPLACEMENT on pages 33 and 34.
of TD CARTRIDGE REPLACEMENT on pages 33 and 34.
4
Gently lift and pull out the paper tray until it stops.
5
Remove the pressure plate lock. Rotate the pressure
plate lock in the direction of the arrow to remove it
while pressing down the pressure plate of the paper
tray.
plate lock in the direction of the arrow to remove it
while pressing down the pressure plate of the paper
tray.
12
GETTING ST
AR
TED
Set-up
SET-UP
Pressure
plate lock
plate lock
Screw
6
Store the pressure plate lock which has been removed
in step 5 and the screw which has been removed in
step 2 in the front of the paper tray.
in step 5 and the screw which has been removed in
step 2 in the front of the paper tray.
●
To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
relevant location.
●
For AL-1622, follow steps 4 to 6 for both the upper and lower trays
except for storage of the screw.
except for storage of the screw.
7
Ensure that the power switch of the copier is in the OFF
position. Plug the power cord into the nearest outlet.
position. Plug the power cord into the nearest outlet.
●
If you use the copier in a country other than the
country where the copier was purchased, you will
need to make sure that your local power supply is
compatible with your model. If you plug the copier
into an incompatible power supply, irreparable
damage to the copier will result.
country where the copier was purchased, you will
need to make sure that your local power supply is
compatible with your model. If you plug the copier
into an incompatible power supply, irreparable
damage to the copier will result.
●
Only insert the power cord into a properly grounded
wall socket.
Do not use extension cords or power strips.
wall socket.
Do not use extension cords or power strips.
Connect the copier to a power outlet which is not used
for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
8
Turn the power switch on.
9
Load copy paper.
●
When loading copy paper for the first time, be sure to turn the power
switch on in advance.
switch on in advance.
●
For loading copy paper, see steps 2 to 4 of LOADING COPY
PAPER on page 13. If you use copy paper other than A4 (default
size), see pages 14 and 15.
PAPER on page 13. If you use copy paper other than A4 (default
size), see pages 14 and 15.
Power on
13
GETTING ST
AR
TED
LOADING COPY PAPER
To save space, this copier has been designed with one (AL-1611) or two
(AL-1622) adjustable front-loading trays, which are easily opened for paper
loading. For best results, use only SHARP recommended paper. (See page 59.)
The paper required (
(AL-1622) adjustable front-loading trays, which are easily opened for paper
loading. For best results, use only SHARP recommended paper. (See page 59.)
The paper required (
) indicator will light up when there is no copy paper in
the selected paper feed station, or when the paper tray is not installed or is
improperly installed.
improperly installed.
When the paper size is changed in the paper tray, the size of
the paper must be entered by steps 8 through 11 on page
15. If not, the edges of copies may become smudged with
toner. Also, the AUTO PAPER SELECT (AL-1622 only) and
the AUTO IMAGE features will not function properly.
the paper must be entered by steps 8 through 11 on page
15. If not, the edges of copies may become smudged with
toner. Also, the AUTO PAPER SELECT (AL-1622 only) and
the AUTO IMAGE features will not function properly.
1
Gently lift and pull out the paper tray until it stops.
2
Push the pressure plate down until it locks in place.
3
Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
the edges go under the corner hooks.
●
If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
adjusted. See the next page.
●
Set the paper along the guides.
●
The tray holds up to 250 sheets of paper.
Do not load paper above the maximum height line.
Do not load paper above the maximum height line.
4
Push the paper tray firmly back into the copier.
Loading cop
y paper
Maximum height line
14
GETTING ST
AR
TED
Changing the copy paper size in the tray
1
Gently lift and pull out the paper tray until it stops.
2
Push the pressure plate down until it locks in place.
3
Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.
front guide to match the width of the paper.
4
Move the left guide to the appropriate slot as marked
on the tray.
on the tray.
●
A5 copy paper cannot be used in the lower paper tray of AL-1622.
5
Load copy paper into the tray.
6
Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.
paper size into the recess on the right front side of the
paper tray.
7
Push the paper tray firmly back into the copier.
Loading cop
y paper
LOADING COPY PAPER
Front guide
Left guide
Click on the first or last page to see other AL-1611 (serv.man24) service manuals if exist.