Sharp AL-1566 (serv.man38) User Manual / Operation Manual ▷ View online
23
INITIAL SETTINGS
2
To change the display format to 12-hour or 24-hour format, follow the steps below:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [OK] key.
and then press the [OK] key.
3
Press the [
] key (
) or [
] key (
)
until "22:DATE&TIME FORMAT"
appears, and then press the [OK] key.
appears, and then press the [OK] key.
4
Press the [
] key (
) or [
] key (
)
until "1:TIME FORMAT" appears, and
then press the [OK] key.
then press the [OK] key.
5
Press the [
] key (
) or [
] key (
)
to select "1:12HOUR" or "2:24HOUR".
6
Press the [OK] key.
7
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key (
key (
) to exit.
1,2,3,
1,2,3,
"4:USER PROGRAM"
Selection
"21:DATE&TIME FORMAT"
Selection
"1:TIME FORMAT"
Selection
1,2,3,
1,2,3,
1,2,3,
1,2,3,
24
INITIAL SETTINGS
To change the order of display of the date, follow the steps below:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [OK] key.
and then press the [OK] key.
3
Press the [
] key (
) or [
] key (
)
until "21:DATE&TIME FORMAT"
appears, and then press the [OK] key.
appears, and then press the [OK] key.
4
Press the [
] key (
) or [
] key (
)
until "2:DATE FORMAT" appears, and
then press the [OK] key.
then press the [OK] key.
5
Press the [
] key (
) or [
] key (
)
to select the display order.
The selections are as
follows:
1:MMDDYYYY
2:DDMMYYYY
3:YYYYMMDD
follows:
1:MMDDYYYY
2:DDMMYYYY
3:YYYYMMDD
6
Press the [OK] key.
7
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key (
key (
) to exit.
1,2,3,
1,2,3,
"4:USER PROGRAM"
Selection
"21:DATE&TIME FORMAT"
Selection
"2:DATE FORMAT"
Selection
1,2,3,
1,2,3,
1,2,3,
1,2,3,
25
INITIAL SETTINGS
2
Daylight Saving Time Setting
Enable this setting to have the internal clock automatically move forward and backward at the beginning and end of
Daylight Saving Time. The clock will move forward and backward as follows:
The last Sunday in March: 1:00 A.M.
Daylight Saving Time. The clock will move forward and backward as follows:
The last Sunday in March: 1:00 A.M.
2:00 A.M.
The last Sunday in October: 1:00 A.M.
0:00 A.M.
Follow these steps to enable Daylight Saving Time.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "2:ENTRY MODE" appears, and
then press the [OK] key.
then press the [OK] key.
3
Press the [
] key (
) or [
] key (
)
until "5:DAY LIGHT SAVING" appears,
and then press the [OK] key.
and then press the [OK] key.
4
Press the [
] key (
) or [
] key (
)
to select "1:ON" or "2:OFF".
5
Press the [OK] key.
6
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key (
key (
) to exit.
If a transmission is in progress when the clock adjustment time for daylight savings time arrives, the clock will not
be adjusted until the transmission ends.
be adjusted until the transmission ends.
Note
1,2,3,
1,2,3,
"2:ENTRY MODE"
Selection
"5:DAY LIGHT SAVING"
Selection
1,2,3,
1,2,3,
1,2,3,
1,2,3,
26
INITIAL SETTINGS
SELECTING THE TRANSMISSION MODE
The machine has two modes for sending faxes: memory transmission and direct transmission. To change modes,
press the [MEMORY] key. The MEMORY indicator lights up when memory transmission is selected, and goes off
when direct transmission is selected.
press the [MEMORY] key. The MEMORY indicator lights up when memory transmission is selected, and goes off
when direct transmission is selected.
Transmission takes place as follows in each mode:
Memory transmission (the MEMORY indicator is lit)
When a fax is sent from the RSPF and there are no previously stored fax jobs and no job in progress (the telephone
line is not being used), dialing and scanning begin at the same time. Each page is transmitted after it is scanned.
This transmission method is called Quick Online transmission.
If there are previously stored fax jobs or a job in progress, or the fax is being sent from the document glass, the fax
is temporarily scanned into memory before transmission.
line is not being used), dialing and scanning begin at the same time. Each page is transmitted after it is scanned.
This transmission method is called Quick Online transmission.
If there are previously stored fax jobs or a job in progress, or the fax is being sent from the document glass, the fax
is temporarily scanned into memory before transmission.
Direct transmission (the MEMORY indicator is off)
The fax is sent directly after the destination is dialed and the connection established.
The machine memory is not used for direct transmission, and thus direct transmission is possible even when the
memory is full.
The machine memory is not used for direct transmission, and thus direct transmission is possible even when the
memory is full.
When a fax is sent by transmission reservation (p.67), broadcast transmission (p.68), broadcasting using a Group
key (p.69),or timer transmission (p.76), the fax is scanned into memory before transmission.
key (p.69),or timer transmission (p.76), the fax is scanned into memory before transmission.
• A fax job cannot be stored while a direct transmission is in progress.
• Only one page can be sent from the document glass by direct transmission.
• A subsequent function cannot be used while a direct transmission is in progress.
• Only one page can be sent from the document glass by direct transmission.
• A subsequent function cannot be used while a direct transmission is in progress.
Transmission reservation (p.67), broadcast transmission (p.68), broadcasting using a Group key (p.69), or timer
transmission (p.76)
transmission (p.76)
01
10
10
06
15
15
02
11
11
07
16
16
03
12
12
08
17
17
04
13
13
09
18
18
05
14
14
SHIFT
MEMORY
CONTRAST
LINE STATUS
SPEAKER
REPORT
SPEED/
SEARCH
SEARCH
BROAD-
CAST
CAST
COVER
SHEET
SHEET
RECEPTION
MODE
MODE
REDIAL/
PAUSE
PAUSE
MEMORY indicator
2-SIDED
TX
TX
RESOLU-
TION
TION
Note
Note
Click on the first or last page to see other AL-1566 (serv.man38) service manuals if exist.