DOWNLOAD Sharp AL-1566 (serv.man38) Service Manual ↓ Size: 3.9 MB | Pages: 96 in PDF or view online for FREE

Model
AL-1566 (serv.man38)
Pages
96
Size
3.9 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / AL 1566 Fax Function Operation Manual
File
al-1566-sm38.pdf
Date
PREV: Sharp AL-1566 (serv.man37) Service Manual / Parts Guide

Sharp AL-1566 (serv.man38) User Manual / Operation Manual ▷ View online

7
6 : AUTO LISTING
Enable automatic printing of the Activity Report when 
information on a total of 50 fax transmissions/receptions 
accumulates.
1 : ON
2 : OFF
85
7 : PRINT SELECTION
1 : TRANSMISSION
Select the condition for printing reports on fax transmissions.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
86
2 : BROADCAST
Select the condition for printing reports on broadcast 
transmissions.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
86
3 : RECEPTION
Select the condition for printing reports on received faxes.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
86
4 : IMAGE MEM. PRINT
Enable printing of the original image on transaction reports.
1 : ALWAYS PRINTS
2 : ERROR ONLY
3 : NEVER PRINTS
86
8 : RECALL TIMES BUSY
Set the number of recall attempts that are made when the line is 
busy.
00 - 10 (02)
30
9 : RECALL TIMES ERR
Set the number of recall attempts that are made when a 
communication error occurs.
0 - 5 (1)
31
10 : RECALL INT. BUSY
Set the interval between recall attempts when the line is busy. 1 
to 15 minutes can be selected.
01 - 15 min. (03 min.)
32
11 : RECALL INT. ERR
Set the interval between recall attempts when a communication 
error occurs. 0 to 15 minutes can be selected.
00 - 15 min. (01 min.)
33
12 : SECURITY SELECT
Enable the polling security function.
1 : ON
2 : OFF
74
13 : FAX REMOTE 
NUMBER
Set the 1-digit number used to activate remote fax reception.
0 - 9 (5)
38
14 : REMOTE RECEPTION
Enable the remote reception function.
1 : ON
2 : OFF
37
15 : FAX SIGNAL RCV
Enable automatic fax reception when a fax tone is heard after 
answering a call on an extension phone.
1 : ON
2 : OFF
36
Menu item
Settings (factory default setting appears in bold)
Page
8
16 : RCV REDUCE
When a fax is received that is larger that the printing paper, 
enable reduction of the fax to the size of the paper to avoid the 
fax being cut off.
1 : ON
2 : OFF
63
17 : BEEP LENGTH
Set the length of the beep that sounds when fax transmission or 
reception ends.
1 : 3 SEC
2 : 1 SEC
3 : NO BEEP
18
18 : RINGER VOLUME
Set the volume of the ringer.
1 : OFF
2 : LOW
3 : MIDDLE
4 : HIGH
17
19 : BEEPER VOLUME
Set the volume of the beep that sounds when a key is pressed.
1 : OFF
2 : LOW
3 : MIDDLE
4 : HIGH
19
20 : INDEX PRINT
Enable printing of a black mark (index) at the top of each 
received fax page.
1 : ON
2 : OFF
34
21 : DATE&TIME FORMAT
1 : TIME FORMAT
Select 12-hour or 24-hour format for the time set in the 
machine.
1 : 12 HOUR
2 : 24 HOUR
23
2 : DATE FORMAT
Set the format of the date in the display and in printouts.
1 : MMDDYYYY
2 : DDMMYYYY
3 : YYYYMMDD
24
22 : PBX SETTING **
Set this function for pbx setting.
1 : ON
2 : OFF
39
23 : 2-SIDED RX
Print on both sides of the paper when a multi-page fax is 
received.
1 : ON
2 : OFF
62
Menu item
Settings (factory default setting appears in bold)
Page
9
* Transfer is only possible when a received fax is being held in memory because printing was not possible. 
In this case, "0:RX DATA TRANSFER" will appear in the display.
**Please note that the PBX setting is only available in Denmark, Finland, Iceland, Norway and Sweden. 
For the other countries, the parameter "22. PBX setting" is replaced by "22 : 2-SIDED RX".
5 :ANTI JUNK FAX
1 : ANTI JUNK SELECT
Enable the anti junk function to block fax reception from 
specified fax numbers.
1 : ON
2 : OFF
78
2 : JUNK FAX #
Program (or delete) fax numbers from which fax reception is to 
be blocked.
1 : SET
2 : CLEAR
79
6 : A.M. MODE
1: QUIET DETECT TIME
Activate fax reception when a period of silence longer than the 
set time is detected.
00 - 10 (05)
46
2 : AUTO RECEIVE
Enable fax reception when the answering machine is full and 
cannot receive messages or otherwise fails.
1 : ON
2 : OFF
47
7 : MEMORY POLL MODE
1 : 1 TIME
Perform polling transmission once.
72
2 : REPEAT
Perform polling transmission repeatedly.
72
8 : POLLING MODE
Poll another fax machine.
70
9 : SERIAL POLL MODE
Sequentially poll multiple fax machines.
71
Menu item
Settings (factory default setting appears in bold)
Page
10
SELECTING SETTINGS FOR THE FUNCTION
The general procedure for configuring settings for the fax function is explained below. Follow this procedure to 
configure the settings explained on pages 6 through 9.
1
Press the [MODE SELECT] key to 
select fax mode.
The "FAX" indicator lights 
up to indicate that fax 
mode is selected.
2
Press the [MENU] key.
"FAX MAIN MANU" will 
appear in the display.
3
Press the [
]  key (
) or  [
] key (
) 
key to select a menu item and press 
the [OK] key.
The item is selected. 
Repeat this step until the 
item that you wish to 
configure appears.
4
Select a setting or enter information
To select a setting:
Press the [
]  key (
) 
or [
] key (
) until the 
setting is selected.
To enter information:
Press the numeric keys 
to enter characters or 
numbers.
5
Press the [OK] key
The setting or information 
is entered.
6
Press the [CLEAR ALL] key (
)
Press the [CLEAR ALL] 
key (
) to exit.
An item can also be selected after pressing the [MENU] key by pressing the numeric key for the item (the key 
corresponding to the number that appears in front of the item). When the numeric key is pressed, the item is 
selected or entered.
Note
R
1,2,3,
1,2,3,
1,2,3,
1,2,3,
• If you mistakenly select the wrong item, 
press the [CLEAR] key (
) and repeat 
the procedure from step 2.
• To cancel a setting for a fax function, 
press the [MENU] key.
1,2,3,
1,2,3,
Note
1,2,3,
1,2,3,
Page of 96
Display

Click on the first or last page to see other AL-1566 (serv.man38) service manuals if exist.

RANDOM: