DOWNLOAD Sharp PN-S525 (serv.man3) Service Manual ↓ Size: 10.19 MB | Pages: 118 in PDF or view online for FREE

PN-S525

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 6

■ Enlarge

• You can align several monitors and integrate them into a single large

screen to display.

• Up to five monitors can be aligned in both the longest and shortest

directions.

•  Each monitor displays enlarged views of separated images.

(Example)

Horizontal direction: 2 monitors

Vertial direction: 2 monitors

Horizontal direction: 3 monitors
Vertial direction: 2 monitors

In the ENLARGE menu, set ENLARGE H/V and ENLARGE-POS H/V.

1) Set the number of monitors aligned in the horizontal direction in

ENLARGE H.

2) Set the number of monitors aligned in the vertial direction in

ENLARGE V.

3) Set the section of the separated image to be displayed on each mon-

itor in ENLARGE-POS H and ENLARGE-POS V.

* The numbers in parentheses are the setting values in (ENLARGE-

POS H, ENLARGE-POS V) format.

Note:

•  AV input signals cannot be used for the Enlarge function.

• To connect 6 or more monitors using PC1 signals, a splitter for the

video signal (commercially available) is required.

• When connected in PC2/PC3/PC4, a splitter for the video signal

(commercially available) is required.

• When Enlarge is used, the AUTO INPUT CHANGE function is dis-

abled.

• To cancel the enlargement, set 1 for ENLARGE H and ENLARGE V

respectively.

■ SWITCHING THE SCREEN SIZE

Even when the screen size is changed, the display may remain the

same depending on the input signal.

(1,2) 

(1,3) 

(1,4) 

(2,2) 

(2,3) 

(2,4) 

(3,2) 

(3,3) 

(3,4) 

(4,2) 

(4,3) 

(4,4) 

(1,1) 

1 

(2,1) 

2 

(3,1) 

(5,2) 

(5,3) 

(1,5) (2,5) (3,5) (4,5) (5,5) 

(5,4) 

(5,1) 

3 

(4,1) 

4 5 

1 

2 

3 

4 

5

PC input

Displays image so it fills the entire screen.

AV input

An image with a 4:3 aspect ratio is stretched
to fill the entire screen.

PC input

An image with a 4:3 aspect ratio is enlarged to
fill the entire screen without changing the
aspect ratio. The edges of the image may be
cut off.

AV input

PC input

Use this size if ZOOM 1 cuts off the subtitles.

AV input

(2,1)

(3,1)

(4,1)

(2,2)

(3,2)

(4,2)

(2,3)

(3,3)

(4,3)

(2,4)

(3,4)

(4,4)

(1,1)

4

(1,2)

2

(1,3)

(2,5)

(3,5)

(5,1)

(5,2)

(5,3)

(5,4)

(5,5)

(4,5)

(1,5)

3

(1,4)

1

5

1

2

3

4

5

PN-S525

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 7

* :With a monitor of screen resolution 1600 x 1200 or 1920 x 1200,

selecting Dot by Dot displays the NORMAL screen.

Note:

• Using this monitor's screen-size switching or dual-screen display

functions to compress or expand the screen for commercial or public
viewing in establishments like cafes or hotels may infringe on the

rights of the creators, as protected by Copyright Law, so please be

careful.

•  When “Enlarge” is set, the screen size is fixed to “WIDE” mode.

• When dual-screen display is selected, the screen size cannot be

changed.

• The appearance of the original video may change if you select a

screen size with a different aspect ratio than the original image (e.g.

TV broadcast or video input from external equipment).

• When an ordinary non-wide image (4:3) is viewed with the whole

screen using the screen-size switching function of this monitor, the

edge of the image may be lost or appear distorted. If you wish to
respect the creator’s intentions, set the screen size to “NORMAL”.

•  When playing commercial software, parts of the image (like subtitles)

may be cropped. In this case select the optimal screen size using the
screen-size switching function of this monitor. With some software,

there may be noise or distortion at the edges of the screen. This is

due to the characteristics of the software, and is not a malfunction.

•  Depending on the original image size, black bands may remain at the

edges of the screen.

■ SCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu.

1) Press 

 or 

 to select the SCHEDULE number, and press

 .

2) Set the SCHEDULE. (See the description below.)

Press 

 or 

 to select items, and press 

 or 

 to change

the setting.

3) Press .

SCHEDULE becomes effective.

Caution:

•  Do not switch off the main power after setting the SCHEDULE.

•  Specify the correct date and time.

SCHEDULE does not function unless the date and time are specified.

•  Check regularly that the set date and time are correct.

Note:

•  Up to 8 SCHEDULE items can be registered.

•  Setting the SCHEDULE flashes the power LED alternately in red

and orange in standby mode.

•  A SCHEDULE that has a large number has precedence over that of

a small number when schedules overlap.

PC input

Displays image so it fills the screen without
changing the aspect ratio of the input signals.

AV input

Displays the entire image of the aspect ratio of
4:3 without changing the aspect ratio.

PC input

Displays the dots of the signals input from the
connected PC as the corresponding dots on
the screen. *

AV input

Displays the dots of the input signals as the
corresponding dots on the screen.

SCHEDULE 

No. POWER  DAY 

OF 

THE 

WEEK TIME INPUT 

XXXX/XX/XX XXX  XX:XX:XX  

(2) 

OK…[MENU] 

1 9 2 0 x 1 0 8 0  

V: 60 Hz    H: 66.3 kHz 

(1) 

(3) (4)  (5)

1

Q

: SCHEDULE effective

-

: SCHEDULE not effective

2 POWER

ON

: Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the

monitor in standby mode.

3 DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE.

ONLY ONCE:

Executes the SCHEDULE once on the specified day.

Specify the day of the week to execute the SCHEDULE.

Executes the SCHEDULE on the specified day of the week every
week. Specify the day of the week to execute the SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

Executes the SCHEDULE every day regardless of the day of the
week.

4 TIME

Specifies the time to execute the SCHEDULE.
Set the time on a 24-hour basis.

5 INPUT

Specifies the input mode at power-on. When not specifying, the
screen at the previous power-off appears.
Input modes displayed on “PC1/AV1” depend on DVI SELECT set-
tings.

Input modes displayed on “PC2/AV2” depend on HDMI SELECT
settings.

Input modes displayed on “PC4/AV3” depend on BNC SELECT set-
tings.

MENU

PN-S525

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 8

■ ADVANCED items (AV input)

Note:

• When FLESH TONE is set to LOW or HIGH, C.M.S.-HUE/-SATURA-

TION/-VALUE cannot be set.

Adjust the hue control.

Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may cause blur-
ring on an image.

Reduce block noise caused by digital compression.

Specify whether to perform 3-dimension Y/C separation.
If dot interference or cross-color is occurring in fast-motion scenes,
selecting “OFF” may improve the image quality.

Adjusts color tone with 6 colors of R (red), Y (yellow), G (green), C
(cyan), B (blue), and M (magenta).

Adjusts color vividness with 6 colors of R (red), Y (yellow), G (green), C
(cyan), B (blue), and M (magenta).

Adjusts color brightness with 6 colors of R (red), Y (yellow), G (green),
C (cyan), B (blue), and M (magenta).

PN-S525

CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION

2 – 1

Caution:

•  Be sure to turn off the main power switch and disconnect the plug

from the power outlet before connecting/disconnecting cables.
Also, read the manual of the equipment to be connected.

•  Be careful not to mix up the input terminal with the output terminal

when connecting cables. Mixing up the input and output terminals
may cause malfunctions and the other problems.

•  Use a commercially available signal cable (DVI-D 24 pin) for the PC1

input terminal. Set DVI SELECT of INPUT SELECT on the OPTION

menu to PC1 DVI-D when using the PC1 input terminal.

• Use a commercially available HDMI cable (conforming to the HDMI

standard) for the PC2 input terminal. Set HDMI SELECT of INPUT

SELECT on the OPTION menu to PC2 HDMI when using the PC2

input terminal. In addition, select the audio input terminal to be used
in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu.

When DIGITAL is selected, connection to the PC audio input terminal

is unnecessary.

•  Use a commercially available signal cable (Mini D-sub 15 pin) for the

PC3 input terminal.

• Use a commercially available signal cable (BNC) for the PC4 input

terminals. Set BNC SELECT of INPUT SELECT on the OPTION

menu to PC4 RGB when using the PC4 input terminals.

• Use a commercially available audio cable (mini stereo jack) for the

PC audio input terminal. Use an audio cable without resistance.

Note:

•  Images may not be displayed properly depending on the computer

(graphics board) to be connected.

•  A screen with 1920 

×

 1080 resolution may not be displayed cor-

rectly on PC4. In this case, check the settings of your computer
(graphics board) to verify that input signals conform to specifica-

tions of this monitor.

•  If there is a check box to disable EDID in display control panel,

check it when using PC4.

•  Use the automatic screen adjustment when a PC screen is dis-

played for the first time using PC3 or PC4, or when the setting of

the PC is changed.

•  The screen is adjusted automatically when SELF ADJUST in the

OPTION menu is set to “ON”.

•  Use a commercially available signal cable (DVI-D 24 pin) for the AV1

input terminal. Set DVI SELECT of INPUT on the OPTION menu to

AV1 (DVI-D) when using the AV1 input terminal.

• Use a commercially available HDMI cable (conforming to the HDMI

standard) for the AV2 input terminal. Set HDMI SELECT of INPUT

SELECT on the OPTION menu to AV2 HDMI when using the AV2

input terminal. In addition, select the audio input terminal to be used

in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu.

When DIGITAL is selected, connection to the AV audio input terminal

is unnecessary.

• Use a commercially available component cable (BNC) for the AV3

input terminals. Set BNC SELECT of INPUT SELECT on the

OPTION menu to AV3 COMPONENT when using the AV3 input ter-

minals.

• Use a commercially available S-video cable for the AV4 input termi-

nal.

•  Use a commercially available video cable (BNC) for the AV5 input ter-

minal.

• Use a commercially available audio cable (RCA) for the AV audio

input terminals.

• The AV1/AV2 input terminals are compatible with the video signals

below:

1920 

×

 1080p @ 50/59.94/60Hz

1920 

×

 1080i @ 50/59.94/60Hz

1280 

×

 720p @ 50/59.94/60Hz

720 

×

 576p @ 50Hz

720 

×

 480p @ 59.94/60Hz

640 

×

 480p @ 59.94/60Hz

•  The AV2 input terminals are compatible with the video signals below:

1920 

×

 1080p @ 24Hz

720 (1440) 

×

 576i @ 50Hz

720 (1440) 

×

 480i @ 59.94/60Hz

•  The AV3 input terminals are compatible with the video signals below:

1080p @50/60Hz, 1080i @50/60Hz, 720p @50/60Hz,

576p @50Hz, 576i @50Hz, 480p @60Hz, 480i @60Hz

H

V

R

G

B

Cr/Pr

Y

Cb/Pb