Sharp LL-S201A (serv.man5) User Manual / Operation Manual ▷ View online
25
E
Specifications
n
HDMI input terminal pins
(HDMI
TM
Connector)
No.
Function
No.
Function
1 TMDS data 2+
11 TMDS clock shield
2 TMDS data 2 shield
12 TMDS clock-
3 TMDS data 2-
13 CEC
4 TMDS data 1+
14 N.C.
5 TMDS data 1 shield
15 SCL
6 TMDS data 1-
16 SDA
7 TMDS data 0+
17 DDC/CEC GND
8 TMDS data 0 shield
18 +5V
9 TMDS data 0-
19 Hot-plug detection
10 TMDS clock+
n
DisplayPort input terminal pins
(DisplayPort 20 pin)
No.
Function
No.
Function
1 MainLane 3-
11 Gnd
2 Gnd
12 MainLane 0+
3 MainLane 3+
13 Gnd
4 MainLane 2-
14 Gnd
5 Gnd
15 Aux +
6 MainLane 2+
16 Gnd
7 MainLane 1-
17 Aux -
8 Gnd
18 Hot-plug detection
9 MainLane 1+
19 Gnd
10 MainLane 0-
20 3.3 V
n
Supported frequency
Resolution
Frame rate
Remarks
640×480
60Hz
VGA
800×600
60Hz
SVGA
1024×768
60Hz
XGA
720×480p
59.94/60Hz
1280×720p
50/59.94/60Hz
1920×1080p
50/59.94/60Hz
720×576p
50Hz
* All are compliant only with non-interlaced.
* Each is scaled to 16:9 and displayed using the full screen.
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is
input.
n
DDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
LL-S201A Me EN13A(1)
LL-S201A Me EN13A(1)
LL-S201A Me EN13A(1)
