DOWNLOAD Sharp LL-S201A (serv.man3) Service Manual ↓ Size: 5.09 MB | Pages: 82 in PDF or view online for FREE

Model
LL-S201A (serv.man3)
Pages
82
Size
5.09 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor
File
ll-s201a-sm3.pdf
Date

Sharp LL-S201A (serv.man3) Service Manual ▷ View online

SERVICE MANUAL 
CODE: 00ZLLS201ASME     
          MODEL   
LL-S201A
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CHAPTER 1.    OUTLINE OF THE PRODUCT ·········································   1-1 
CHAPTER 2.  INSTALLATION,ADJUSTMENT,SETTING ························  2-1 
CHAPTER 3.    INPORTANT INFORMATION FOR SERVICING THE DISPLAY   
AND SOFTWARE INFORMATION ···································   3-1 
CHAPTER 4.    DISASSEMBLY AND ASSEMBLY   ·································   4-1 
CHAPTER 5  TOROUBLESHOOTING ·················································  5-1 
CHAPTER 6.  HARDWARE DESCRIPTIONS ········································  6-1 
CONTENT
 
Parts marked with “
!”
 are important for maintaining the safety of the set. Be sure to replace these parts 
with specified ones for maintaining the safety and performance of the set.
 
SHARP CORPORATION 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
LEAD-FREE SOLDER 
The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. 
The alphabet following the LF mark shows the kind of lead-free solder.   
  <Solder composition code of lead-free solder> 
Solder composition 
Solder composition code 
Sn-Ag-Cu 
Sn-Ag-Bi 
Sn-Ag-Bi-Cu 
Sn-Zn-Bi z 
Sn-In-Ag-Bi i 
Sn-Cu-Ni n 
Sn-Ag-Sb s 
Bi-Sn-Ag-P 
Bi-Sn-Ag 
(1) NOTE FOR THE USE OF LEAD-FREE SOLDER THREAD 
When repairing a lead-free solder PWB, use lead-free solder thread. Never use conventional lead solder thread, which may cause a 
breakdown or an accident.   
Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclu-
sive-use soldering iron is recommendable.   
(2) NOTE FOR SOLDERING WORK 
Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering 
capacity is inferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land 
separation or may exceed the heat-resistive temperature of components. Use enough care to separate the soldering iron from the PWB when 
completion of soldering is confirmed.   
Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.     
If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip 
after completion of soldering work.   
If the soldering iron tip is discolored black during soldering work, clean and file the tip with steel wool or a fine filer.
 
CAUTIONS 
THERE IS A RISK OF EXPLOSION IF THE BATTERY 
IS REPLACED BY AN INCORRECT TYPE. 
PROPERLY DISPOSE OF USED BATTERIES ACCORDING   
TO THE INSTRUCTIONS. 
LL-S201A  OUTLINE OF THE PRODUCT      1 - 1 
 
CHAPTER 1.    OUTLINE OF THE PRODUCT 
 
1. SPECIFICATION                 
                                                     
1-1. OUTLINE 
Model  
LL-S201A 
LCD component 
19.5" Class [19-1/2 inch (49.5cm) diagonal] TFT LCD 
Max. resolution   
1920×1080 pixels 
Max. colors 
Approx. 16.77 million colors 
Pixel pitch 
0.075 mm (H) × 0.225 mm (V) 
Viewing angle 
178° right/left/up/down (contrast ratio 
≥ 10) 
Screen active area 
17 x 9-9/16 (432 x 243) inch (mm) 
Plug and play   
VESA DDC2B 
Power management 
VESA DPMS 
Color adjustment 
menu 
Image quality   
Normal/Pen writing/Game/Multimedia 
Color temperature 
9000K, 7500K, 6500K (default), 5000K, and 4200K 
(With individual RGB adjustment and adjustment reset functions) 
Input terminals   
 
HDMI 
x 1 (HDMI Ver.1.3/MHL Ver.1.2) 
DisplayPort   
x 1 (Ver.1.1) 
Output terminals 
Headphones   
Headphones 
φ3.5 mm mini stereo jack (Type I) 
Speaker output 
1W+1W 
Touch Panel 
Touch screen system   
Capacitive 
USB (for touch panel) 
x1, microUSB Type B Ver.1.1 
Maximum touch points 
10 points 
Power requirement 
AC 100 V, 50/60 Hz (when using the supplied AC adapter) 
Operating temperature * 
32°F to 95°F (0°C to 35°C) 
Operating humidity * 
20% to 80% (no condensation) 
Power consumption 
(Maximum/When MHL charging/When in standby) 
40 W / 35 W / 0.3 W (when using the supplied AC adapter) 
Dimensions (excluding protrusions) 
Approx. 18-1/4 (W) x 15/16 (D) x 10-13/16 (H) (463.8 x 25.2 x 274.8) inch 
(mm) 
Weight 
Approx. 5.07 (2.3) (excluding the stand) 
Approx. 6.39 (2.9) (including on stand)    lbs. (kg) 
* In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are  
satisfied. 
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for 
product improvement without prior notice. The performance specification figures indicated are nominal values of production 
units. There may be some deviations from these values in individual units. 
 
 
 
 
 
 
 
 
 
 
 
LL-S201A  OUTLINE OF THE PRODUCT      1 - 2 
 
1-2. DIMENSIONAL DRAWING 
 
 
※ Use a VESA-compliant mounting bracket capable of supporting 4 times the weight of the monitor. 
※ When attaching a VESA-compliant mounting bracket, use M4 screw that are 3/16 inch to 1/4 inch (4 to 6 mm). Longer than thickness of 
the mounting bracket.   
※ When mounting the monitor on a wall or ceiling, ensure that the mounting location is capable of supporting 4 times the weight of the 
monitor (e.g. a concrete wall or column). 
 
■Standing position                                                    ■Pen writing position 
   
                   
1-3. SUPPORTED FREQUENCY 
Resolution Frame 
rate 
Remarks
640×480 60Hz 
VGA 
800×600 60Hz 
SVGA 
1024×768 60Hz 
XGA 
720×480p 59.94/60Hz   
1280×720p 50Hz/59.94/60Hz   
1920×1080p 50Hz/59.94/60Hz   
720×576p 50Hz  
※ All are compliant only with non-interlaced. 
※ Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. 
 
 
 
 
Page of 82
Display

Sharp LL-S201A (serv.man3) Service Manual ▷ Download

  • DOWNLOAD Sharp LL-S201A (serv.man3) Service Manual ↓ Size: 5.09 MB | Pages: 82 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp LL-S201A (serv.man3) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp LL-S201A (serv.man3) Monitor. Information contained in Sharp LL-S201A (serv.man3) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.