Sharp LL-P202V (serv.man2) Service Manual ▷ View online
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 21
6. SYSTEM REQUIREMENTS
6-1. TOUCH PANEL
To use the touch panel, the monitor must be connected to a computer using a USB cable.
Touch panel operating conditions are as described below.
Computer
PC/AT compatible computer with a USB 2.0 port and able to output a resolution of 1920×1080
OS
Windows 8(32 bit or 64 bit version), Windows 7(32 bit or 64 bit version), Windows Vista(32 bit or 64 bit version)
• Windows 7 or later is recommended for touch action
• The touch panel operates with the standard Windows driver.
6-2. INSTALLING THE TOUCH PANEL DRIVER
To use the touch panel in Windows Vista, you must install the touch panel driver on the CD-ROM (included).
If this driver software is already installed, uninstall it.
(Caution)
-
This driver software is only for use with a landscape installation.
-
This can only be done by a user with administrator authority.
-
Do not install the touch panel driver on Windows 7 or later. Doing so will disable operations such as the multi touch operation.
-
If you are using a USB hub, use a self-powered hub (a hub capable of supplying a 500 mA current). The touch panel will not operate
correctly if a bus-powered USB hub is used.
-
The driver software is installed to the USB port that is connected to the touch panel. If the touch panel is reconnected to a different USB
port on the computer, the driver software must be reinstalled.
-
On occasion it may not be possible to use the touch panel after the computer is wakened from sleep mode. In this event, disconnect and
then reconnect the USB cable that connects to the LCD monitor.
1) Start your PC.
2) Exit all applications that are running.
3) Connect the monitor to the PC with the included USB cable.
After it has been connected, the monitor will be automatically recognized.
4) Insert the supplied CD-ROM into the CD-ROM drive of your PC.
5) Open the CD-ROM in “Computer”.
6) Double-click the install file.
-
If you are using the LL-S242A-W, double-click “¥TouchDisplay_Driver¥setup.exe”.
-
If you are using the LL-P202V, double-click “¥TouchDisplay_Utility¥setup.exe”
-
When the “Security Alert”screen appears, click“Run”.
-
When the “User Account Control”screen appears, click“Allow”.
7) Click “Next”.
Follow the on-screen instructions to install the driver.
-
If the “Windows Security” screen appears, click “Install”.
8. When the installation finished screen appears, click “Finish”.
This completes the installation of the touch panel driver.
(MEMO)
-
To change the setting for right-click operation (press and hold) or the double click range, click “SHARP Touch Display Settings”in
“
Control Panel” after installation is finished. In the right-click operation settings, right-click operation OFF/ON and the press and hold
time can be set.
* In some cases the operation may not be mouse right-click.
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 22
6-3. UNINSTALLING THE DRIVER SOFTWARE
(Caution)
・
This can only be done by a user with administrator authority.
1) Exit all open applications.
2) Select “Control Panel” from the “Start” menu.
3) Click “Uninstall a program”.
- In the icon view (Classic view), double-click “Programs and Features”.
4) Select “Windows XXX - SHARP(shptchdp) HIDClass” and click “Uninstall” (where XXX is the name of the driver package which varies
depending on the language)..
- Follow the on-screen instructions.
- When the “User Account Control” screen appears, click “Continue”.
This completes the uninstallation.
[If you have mistakenly installed the touch panel driver on Windows 7 or later:]
-
Uninstall touch panel driver “Windows XXX - SHARP(shptchdp) HIDClass” (where XXX is the name of the driver package which varies
depending on the language).
-
After the touch panel driver is uninstalled, disconnect and then reconnect the USB cable that connects to the LCD monitor.
6-4. PEN SOFTWARE
Operating conditions for the included Pen Software are as described below. To install Pen Software, refer to the Pen Software Operation
Manual. Pen Software is for use with monitors installed in landscape orientation.
Computer
PC/AT compatible computer able to output a resolution of 1920 × 1080.
(CD-ROM driver required for software installation)
OS
Windows 8(32 bit or 64 bit version), Windows 7(32 bit or 64 bit version), Windows Vista(32 bit or 64 bit version)
CPU
Intel Celeron or AMD Sempron 1.6GHz or faster
Intel Core 2 Duo or AMD Athlon X2 2.8GHz or faster recommended
Memory
At least 2GB
Free space on
hard disc
At least 100MB(free space separately required for data storage)
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 23
6-5. TOUCH ACTION
■
Touch action modes
There are two touch action modes, normal mode and pen only
mode. These modes can be changed on the menu screen. The
monitor is set to normal mode when shipped.
[Normal mode]
In this mode, the screen can be touched with your finger or with
the touch pen.
While the screen is being touched with the touch pen, touch pen
operation is given priority and you cannot touch the screen with
your finger.
Once the touch pen has been moved away from the screen for
around 1 second, you can touch the screen with finger.
[Pen only mode]
This mode is for touch pen use only. You cannot touch the
screen with your finger. You can touch the menu screen with
your finger.
■
Touch action
Touch actions that can be used with this monitor differ according
to operating system and application. The functions of touch
actions are also different. For details, check Windows Help and
the application’s support documentation.
(TIPS)
• In Windows 7, if the checkmark has been removed from
「
Enable multi-touch gestures and inking」in 「Pen and touch」
in Control Panel, select the checkbox.
■
Common finger and touch pen actions
Single-tap
Touch the screen with your finger/touch pen
Double-tap
Quickly touch the screen twice with your finger/touch pen.
Swipe
Touch the screen with your finger/touch pen, mode without lifting
and then stop.
Swipe from edge of screen
After touching the edge of the monitor with your finger/touch pen,
move horizontally without releasing your finger/touch pen and
then stop.
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 24
Drag-and-drop
Touch the screen with your finger/pen and move without lifting.
When you have finished the movement, lift your finger/touch pen.
Slide to pan
With your finger/touch pen touching the screen, move it up and
down to scroll the screen.
Flicks
Move your finger/touch pen in a flicking motion.
Press-and- hold
Press briefly with your finger/touch pen, and then you’re your
finger/touch pen from the screen.
■
Finger actions
Zoom
While touching the screen with fingers, move them closer together
and farther apart.
Press-and-tap
With one finger touching the screen, tap once (single tap) with
another finger.
Rotate
While touching the monitor with one finger, move the other finger
in the direction you wish to rotate in.
Click on the first or last page to see other LL-P202V (serv.man2) service manuals if exist.