Sharp LL-P202V (serv.man2) Service Manual ▷ View online
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 5
6) Place the monitor in the stand.
Landscape orientation
Run the cables out between the legs of the back side.
Portrait orientation
Run the cables along the hollow on the front side and out between the legs of the back side.
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 6
7) Secure the monitor to the stand using the two fixing screws.
Landscape orientation
Portrait orientation
[
Disassembling the rack stand
]
<Caution>
After removing the monitor from the rack stand, store the stand so that the screws will not be lost.
1) Remove the screws and remove the monitor.
Remove fixing screws
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 7
2) Disengage the tabs of the support on the front side, and raise the support.
3) Fold the stand closed and separate the front and back sides.
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 8
1-3. Pen writing position
Remove the monitor from the stand and place face-down on a table or other level surface.
<Caution>
・
Do not exert a large amount of force on the monitor from above. Doing so may damage the flap. (LL-P202V)
・
After removing the monitor from the rack stand, store the stand so that the screws will not be lost.
■LL-P202V
Place the monitor on a table or other level surface.
1) Hold the flap by the depression on the back of the monitor and pull the flap up.
2) Place the monitor where you want to use it.
Click on the first or last page to see other LL-P202V (serv.man2) service manuals if exist.