DOWNLOAD Sharp LL-P202V (serv.man2) Service Manual ↓ Size: 9.65 MB | Pages: 127 in PDF or view online for FREE

Model
LL-P202V (serv.man2)
Pages
127
Size
9.65 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor
File
ll-p202v-sm2.pdf
Date
PREV: Sharp LL-P202V Handy Guide

Sharp LL-P202V (serv.man2) Service Manual ▷ View online

LL-P202V/S242A  INSTALLATON / SETTINGS      2 - 1 
 
CHAPTER 2.    INSTALLATION / SETTINGS 
 
1. INSTALLATION 
 
1-1. INSTALLATION POSITION 
You can install the touch display for each monitor in the following positions. 
Installation position 
LL-P202V 
LL-S242A 
Standing position 
Rack stand 
No 
Yes 
Variable stand 
Yes 
No 
Pen writing position 
Yes 
No 
Horizontal position 
Yes 
Yes 
 
1-2. Standing position 
■LL-P202V 
[Placement on the variable stand] 
Place the unit on the supplied variable stand.
 
<
Caution> 
・
The variable stand is designed for placement of the unit in the landscape orientation. It cannot be used for the portrait orientation. 
・
For installation, place the monitor face-down carefully on a soft cloth on top of a flat, stable surface. 
・
Applying excessive pressure to the LCD panel with your hands may result in damage to the unit. 
・
Be careful not to get your fingers caught when adjusting the angle, for example. 
 
1) 
Place the variable stand on the rear of the monitor, insert the fixing screws and tighten by hand to position the stand.
 
 
2) Securely tighten the fixing screws using the supplied hexagonal wrench. 
 
LL-P202V/S242A  INSTALLATON / SETTINGS      2 - 2 
 
3) Place the monitor in the standing position, and adjust the angle of the stand. 
Hold the display with one hand so that it does not fall over, hold the rear leg of the stand with your other hand, and adjust the angle of the 
stand. 
 
The legs can extend about 20 to 75 degrees in relation to the flat surface.
 
 
LL-P202V/S242A  INSTALLATON / SETTINGS      2 - 3 
 
■LL-S242A 
[
Placement on the rack stand
] 
Place the unit on the supplied variable stand.
 
1) Attach the back of the stand to the front. 
Place the front and back sides together, and attach the hinge. 
   
 
   
 
2) Spread the base of the front and back sides. 
LL-P202V/S242A  INSTALLATON / SETTINGS      2 - 4 
 
3) Peel off the adhesive tape securing the support to the back side. 
   
 
4) Fold down the support, inserting the tabs into the holes on the front side. 
   
 
5) Position the stand. 
   
 
Page of 127
Display

Click on the first or last page to see other LL-P202V (serv.man2) service manuals if exist.

RANDOM: