Sharp LL-P202V (serv.man2) Service Manual ▷ View online
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 9
1-4. Horizontal position
Place the monitor on a table or other level surface.
<Caution>
・
When using the monitor horizontally, use the horizontal tab in the upright position.
■LL-P202V
1) Lift up the two tabs on the back of the monitor.
2) Place the monitor where you want to use it.
■LL-S242V
1) Place the monitor where you want to use it.
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 10
2. CONNECTING PERIPHERAL EQUIPMENT
<Caution>
・
Be sure to turn off the power and disconnect the plug from the power outlet before connecting/disconnecting cables.
Also, read the manual of the equipment to be connected.
・
Do not forcibly bend or apply force to cables. Doing so may result in wire breakage or other damage.
・
When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with the screen
facing down.
・
Do not use any cable that has a damaged or deformed terminal. Using such cables may cause malfunctions.
・
Connect USB devices that have the following thicknesses around the connector area.
<Tips>
・
Images may not be displayed properly depending on the computer (video card) to be connected.
・
To use the digitizer pen, the necessary software must be installed on the computer from the supplied CD-ROM.
・
When connecting a USB device to the USB terminal, use only USB devices with current consumption of 500mA or lower.
■
Connection with a PC
Connect the monitor and a PC using the connection cable.
[Inputting video and audio HDMI input terminal]
Check the orientation of the connector and insert it horizontally as far as it will go.
It is possible to connect the monitor’s HDMI input terminal to a smart phone or similar MHL-compliant device using a commercially
available MHL cable.
This production incorporates MHL 1.
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 11
[DisplayPort input terminal]
Check the orientation of the connector and insert it horizontally as far as it will go.
(TIPS)
• The length of the signal cables or surrounding environment may affect the image quality.
• The video from the terminal that has signal input is displayed. In this state, even if a signal is input from the other terminal, the display is
not switched. To switch the display, use [Input Selection] on the menu screen.
• If the LCD monitor is turned on when there are input signals from both terminals, the video from the DisplayPort input terminal is
displayed.
[Using the touch panel]
To use the touch panel, connect the monitor to a USB port on a PC using the supplied USB cable.
Check the orientation of the connector and insert it horizontally as far as it will go.
LL-P202V/S242A INSTALLATON / SETTINGS 2 - 12
[Connecting USB devices]
When using a commercially available mouse, keyboard, or other device, connect the device to the USB port.
Check the orientation of the connector and insert it horizontally as far as it will go.
[Connecting the digitizer pen (LL-P202V only)]
When using the supplied digitizer pen, connect the digitizer pen cable.
Check the orientation of the connector and insert it horizontally as far as it will go.
Click on the first or last page to see other LL-P202V (serv.man2) service manuals if exist.