Sharp UP-5300 (serv.man6) FAQ ▷ View online
When starting FM I enter
the wrong Username or
Password and the screen
goes blue.
the wrong Username or
Password and the screen
goes blue.
When the screen is
blue type CLS then
press enter and this
will take you back to
the Dos prompt.
blue type CLS then
press enter and this
will take you back to
the Dos prompt.
I am getting the following
error when the SLAVE
5700 / 5300 starts up.
error when the SLAVE
5700 / 5300 starts up.
“Barcode error open failed
-37”
-37”
There is a corrupt or missing
Barcode file.
Barcode file.
To rectify this copy
\usr\data\Barc*.* from another
machine.
\usr\data\Barc*.* from another
machine.
The 5700 / 5300
screen stays blank and
bleeps several times.
screen stays blank and
bleeps several times.
Set dip switch 6 on and reboot
the Pos then the machine will
Bleep 3 times. Then se
Dipswitch 6 off and reboot the
pos again.
the Pos then the machine will
Bleep 3 times. Then se
Dipswitch 6 off and reboot the
pos again.
No printing is taking
place on my ER-01PU
printer, but I can copy a
file to the Com Port and
it prints !
place on my ER-01PU
printer, but I can copy a
file to the Com Port and
it prints !
The problem for this
particular caller was the
cable was configured
without 6&8 shorted out
at both ends
particular caller was the
cable was configured
without 6&8 shorted out
at both ends
First of all you have to check that you have
First of all you have to check that you have
the correct settings in FM, then check your
the correct settings in FM, then check your
Printer.
Printer.
def
def
file, it is critical to have the exact
file, it is critical to have the exact
text entry,
text entry,
Click on the first or last page to see other UP-5300 (serv.man6) service manuals if exist.