DOWNLOAD Sharp UP-5300 (serv.man6) Service Manual ↓ Size: 246.44 KB | Pages: 43 in PDF or view online for FREE

I am getting the following
error when paying by Credit
card using comidea on the
5700 / 5300.

“-90 Error”

Check that the POS
has a mapped drive to
the backoffice pc.

This can be done by
creating the following
file NETL.BAT in the
C:\USR\EX directory
as shown below.

Having set up EPoS
Manager to perform Real
time update at next start of
day the machine operates
with the correct Products
from EPOS Man but the
next day they revert back
to the old product file

The problem is caused
because of date/time not being
in sync on both EPoS and PC.
The solution is to delete the
PRDUPD.CSV file from the
master machine, then delete
the relevent files from the
USR/DATA/RTU folder(PROD
file) then perform EOD on the
system then go back
toEPOSMAN and set for
update at next SOD.

Having installed PCFM i
can see the Till from the
PC but I cant see the PC
from the Till on the 5700
/ 5300

.

Check that the PC
computer name is set
to be NODE16 and
that the master till is
set correctly ie
NODE001 and that
the network is running
before starting the
installation of pcfm

.

I am using Hard Disk
Drives and the Start of
Day runs slowly when
counting the products.

There is a setting in
c:\Rincs.cfg called

# BASEFAST=E:

Remove the # infront of
the line and if you have
dipswitches 3,4,5 on
then set the line as
follows.

BASEFAST=D: