DOWNLOAD Sharp ER-A771 (serv.man8) Service Manual ↓ Size: 605.19 KB | Pages: 67 in PDF or view online for FREE

When you want to enter manually a PLU item programmed for the drink dispenser connected to
your machine, the drink dispenser must be in the off-line mode. Generally in the IRC system, the
on-line/off-line mode choice information is distributed during drink dispensor programming.
However, if a trouble occurs in the IRC system, such information can not be distributed.
In this case, you can locally set the on-line/off-line mode for each drink dispenser with the
followng procedure.

This local on-line/off-line mode choice is valid only for the drink dispenser whose number was
specified and distributed via the LAN.  This choice can not be made for the drink dispenser
connected to the machine where this choice is being made but can only be made for other drink

dispensers.

• This job directly changes the drink dispenser on-line/off-line mode information distributed,

via the LAN, from another machine connected to a drink dispenser. When the IRC system is
recovered, therefore, the on-line/off-line mode choice information on all machines in the
system must be updated again.

• This job does not check whether a drink dispenser with a specified number really exists or

not.

Enter the PGM2 mode from the mode selection

window.

Select “SETTING” and press the 

ENTER

 key.

Select “DRINK DISPENSER” and press the 

ENTER

 key.

Move the cursor to “LOCAL DD” and press the 

ENTER

key.

With the cursor at the desired drink dispenser number,

select ON-LINE or OFF-LINE and press the 

ENTER

 key.

1) Setting the link between sort codes and PLU codes in the IRC system

In the IRC system, the procedure for setting the link between sort codes and PLU codes is the

same as that in a standalone machine. (For the setting procedure, see the ER-A771 Instruction

Manual)

As the final 

CASH/TL

 key is pressed, the program for the drink dispenser sales article table is sent to

every machine in the IRC system. Thus the link information in the IRC system is distributed in

real time.

If the data can not be sent to a machine, the corresponding machine number and error message

(“INLINE ERROR”) are shown on the display screen.

• Linking of the same PLU code is not disabled for sorting two or more drink dispensers in the

IRC system. In this case, however, the operation to correct this for the drink dispensers can be

executed at a machine not connected with a drink dispenser only when the off-line mode is

selected at all drink dispensers where this PLU code is linked.

2) Choosing whether to set the on-line or off-line mode for the drink dispenser

In the IRC system, the procedure for setting the on-line/off-line mode for the drink dispenser is

the same as that in a standalone machine. (For the setting procedure, see the ER-A771

Instruction Manual.)

As the final 

CASH/TL

 key is pressed, the drink dispenser on-line/off-line mode information is sent to

every machine in the IRC system. Thus the link information in the IRC system is distributed in

real-time.

If the data can not be sent to a machine, the corresponding machine number and error message

(“INLINE ERROR”) are displayed.

The LAN interface for the ER-A771 POS enables the ER-A771 to perform in-line

communications to a host P.C. through the connection to a Manager Work Station (MWS).

The function of Manager Work Station:

1) Downloading of the terminal data

[Terminal 

 PC]

2) Uploading of the terminal data

[Terminal 

 PC]

3) Remote Job Entry (RJE) function

[Terminal 

 PC]

4) T-Log function

[Terminal 

 PC]

5) ELECTRONIC MAIL function

[Terminal 

 PC]

6) Hotel transfer function

[Terminal 

 PC]

The terminal number of MWS can be specified by the following procedure:

After entering the PGM2 mode, select “SETTING” and

press the 

ENTER

 key.

Select “MWS CONFIG” and press the 

ENTER

 key.

Enter the terminal number for IP ADDRESS 4 from

(0 - 254) of MWS and press the 

ENTER

 key.

The time-out value for receiving the data can be specified by the following procedure:

After entering the PGM2 mode, select “SETTING” and

press the 

ENTER

 key.

Select “MWS CONFIG” and press the 

ENTER

 key.

Enter the time-out time (1 - 255 (sec)) and press the

ENTER

 key.

NOTE:

This value will depend upon the application.  Please

consult your authorized SHARP dealer.

The gateway number can be specified by the following procedure:

After entering the PGM2 mode, select “SETTING” and

press the 

ENTER

 key.

Select “MWS CONFIG” and press the 

ENTER

 key.

Enter the gateway number (0 - 255) and press the

ENTER

 key.