Sharp ER-A771 (serv.man8) User Manual / Operation Manual ▷ View online
64
A) RETRY command (selection from the menu or press of the 1 key)
B) ABORT command (selection from the menu or press of the 2 key)
C) IGNORE command (selection from the menu or press of the 3 key)
A) RETRY command:
When RETRY is selected, the master retries to access the satellite; however, depending on
the type of error (command error, etc.), it is obvious that the master would fail to access it
again. If this type of error occurs during transmission, the master may not retry.
B) ABORT command:
When ABORT is selected, the master terminates access to the satellite and regards the
transmission as having unsuccessfully ended. However, in the case of program data
downloading, the ABORT command may be issued only when all the satellites accessed are
in the error state.
C) IGNORE command:
When IGNORE is selected, the master terminates access to the satellite, regards the
transmission as having successfully ended and prints only transmitted data.
If no satellites have successfully transmitted data, the IGNORE command may be issued to
the master in the case of sales data inquiry (X report), though the result is not printed.
[Retry during sales data inquiry]
During resetting, the ABORT command may be given only when every accessed satellite is
in the error state. The IGNORE and RETRY commands are available unconditionally.
65
BASIC SPECIFICATIONS
Transmission system:
10 Base-T
Transmission speed:
10 Mbits/sec
Transmission distance:
Segment length max. 100 m
Transmission cable:
Twisted pair cable (Category 5)
No. of connectable machines:
Master: 1
Satellites: max. 15
SHARP CORPORATION
ERA771G_2IE10
SHARP CORPORATION
ERA771G_2IE10
