DOWNLOAD Sharp AR-F14 Service Manual ↓ Size: 593.05 KB | Pages: 3 in PDF or view online for FREE

Model
AR-F14
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
593.05 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / 1. Introduction
File
ar-f14.pdf
Date

Sharp AR-F14 Service Manual ▷ View online

Parts marked with “
“ are important for maintaining the safety of the set. 
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
DIGITAL COPIER
MULTIFUNCTIONAL SYSTEM
OPTIONS
FINISHER
PUNCH UNIT
AR-F14
MODEL
AR-PN1
CODE : 00ZARF14//A1E
[1]
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[2]
EXTERNAL VIEWS AND INTERNAL STRUCTURES  . . . . . . . 2 - 1
[3]
UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[4]
OPERATIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
[5]
DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
[6]
MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[7]
MACHINE OPERATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
[8]
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1
[9]
TROUBLESHOOTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1
[10] SIMULATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1
[11] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1
AR-F14
  CONTENTS
[00]COVER.fm  1 ページ  2004年4月27日 火曜日 午後6時32分
CONTENTS
[1] INTRODUCTION
1. Product outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
2. Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
3. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
4. Consumable parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
[2] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. External view  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
2. Internal structure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
3. Finisher and saddle section . . . . . . . . . . . . . . . . . . . . .  2-2
4. Interface transport section  . . . . . . . . . . . . . . . . . . . . . .  2-3
5. Puncher section (AR-PN1) . . . . . . . . . . . . . . . . . . . . . .  2-3
[3] UNPACKING AND INSTALLATION
1. AR-F14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
2. AR-PN1  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7
[4] OPERATIONAL DESCRIPTION
1. Basic Operations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
2. Feed/Drive System . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
3. Stapling Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-7
4. Delivery Tray Operation  . . . . . . . . . . . . . . . . . . . . . . . .  4-10
5. Saddle Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-11
6. Puncher Unit (option) . . . . . . . . . . . . . . . . . . . . . . . . . .  4-14
7. Detecting Jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-16
8. Power Supply System. . . . . . . . . . . . . . . . . . . . . . . . . .  4-18
[5] DISASSEMBLY AND ASSEMBLY
1. Finisher Saddle Unit . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
2. puncher Unit (option) . . . . . . . . . . . . . . . . . . . . . . . . . .  5-17
[6] MAINTENANCE
1. Maintenance System Table . . . . . . . . . . . . . . . . . . . . . . 6-1
2. Discarding punch waste 
                                     (when a punch unit is installed) . . 6-1
[7] MACHINE OPERATION
1. Staple sort mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
2. Setup by the printer driver. . . . . . . . . . . . . . . . . . . . . . . 7-2
3. Using the saddle stitch finisher functions 
                                                                 in copy mode  . . 7-2
[8] ADJUSTMENTS
1. Finisher/saddle unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
2. Puncher unit (option). . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] TROUBLE SHOOTING
1. Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
2. Trouble code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
3. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
[10] SIMULATIONS
1. Finisher/Saddle unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
2. Puncher unit (option). . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
[11] ELECTRICAL SECTION
1. LEDs and Check Pins by PCB  . . . . . . . . . . . . . . . . . . . 11-1
2. Wiring diagram (AR-F14)  . . . . . . . . . . . . . . . . . . . . . . . 11-2
3. Wiring diagram (AR-PN1) . . . . . . . . . . . . . . . . . . . . . . . 11-4
[co]CONTENTS.fm  1 ページ  2004年4月19日 月曜日 午後1時43分
AR-F14/PN1 INTRODUCTION 1-1
[1] INTRODUCTION
1. Product outline
This unit is installed to the following machines to perform the after-process of output paper from  a copier, or a fax machine.
1) Employment of the through-type stapler
Employment of the through-type stapler allows to make saddle stitch by one stapler.
2) 3 kinds of auto staple functions
There are 3 staple positions available. (One position in the front, one position at the back, 2 positions at the center)
3) Saddle stitch function
Up to 10 sheets of paper can be stapled at the center and folded into two and discharged. 
4) Punch function (Option)
By installation of a puncher unit, paper can be punched to make holes for a binder. (Applicable for 64 - 128g/m². OHP films cannot be used.)
2. Configuration
1.
When installing this machine, the exclusive-use table (large) or the exclusive-use table (small) + the multi-stage paper feed unit 
(AR-D21 or AR-D22) must be attached to in advance.  
2.
This unit cannot be installed with the following units:
•Finisher (AR-FN5N)
3. Specifications
A. AR-F14
(1) Basic specifications
(2) Finishing section
(3) Saddle stitch section
B. AR-PN1
4. Consumable parts
Applicable models 
AR-M237 / M277, AR-M236 / M276
Type
Console type finisher
Transport speed
23/26/27 ppm
Transport reference
Center reference
Tray type 
(Number of trays)
Upper tray
Lift-up/down offset tray
Lower tray
Book tray for saddle stitch
Paper exit direction
Face down
Paper exit paper size
A3, B4, A4, A4R, B5, B5R, A5, 
11" x 17", 8.5" x 14", 8.5" x 13", 
A5/Invoice R inhibited
A5/Invoice horizontal allowed
8.5" x 11", 8.5" x 11"R, 
5.5" x 8.5"
Power consumption
60W or below
Power source
Supplied from the machine power 
(DC24V, 2.5A)
External dimensions (W x D x H) 661 x 603 x 1016 (mm)
Occupying dimensions (W x D)
712 x 603 (mm)
Weight
About 38kg
Capacity of 
paper exit and 
load
Non-staple
*1,000 sheets (Small size)
500 sheets (Large size)
Staple sort
*30 sheets
* Equivalent to 64g/m² of paper
Max
1,000 sheets (Small size)
500 sheets: (Large size)
Less than 1,000 sheets and less than 30 copies 
depending on the use environment and paper curl. 
Large size
A3, B4, 
11" x 17", 8.5" x 14", 8.5" x 13"
Small size
 A4R, B5, B5R, A5, 
8.5" x 11", 8.5" x 11"R, 5.5" x 8.5"R
Offset function
Provided 
Paper size which 
can be stapled 
A3, B4, A4, A4R, B5, B5R,
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11", 
8.5" x 11"R
Kinds and 
weights of paper 
to be discharged
Normal paper
60 - 128g/m² (16 - 34lbs)
Index paper
176g/m² (47lbs)
Cover paper
200 g/m² (54lbs)
Quantity of paper 
to be stapled 
(Max.)
50 sheets 
(Small size, 128g/m² x 2 + 80g/m² x 48)
25 sheets (Large size, 80g/m² x 25)
Large size
A3, B4, 
11" x 17", 8.5" x 14", 8.5" x 13"
Small size
A4, A4R, 
8.5" x 11", 8.5" x 11"R, B5, B5R
Stapling
3 kinds 
(One in the front, one at the back: two positions)
two positions
A3, B4, 11" x 17", 8.5" x 14", 
8.5" x 13", A4, 8.5" x 11", B5, B5R
one at  the back A3, B4, A4, A4R, B5, B5R
one in the front 11" x 17", 8.5" x 14", 8.5" x 13", 
8.5" x 11", 8.5" x 11"R, B5, B5R
Staple supply
Staple cartridge replacement
Staple detection
Staple empty 
detection
Provided
Cartridge 
empty 
detection 
Provided
Staple jam 
detection 
Provided
Stapling type
Center stapling: Center folding
Stapling position
120mm pitch from the paper center
Weight of paper applicable for 
saddle stitch
A3, A4R, B4, 
11" x 17", 8.5" x 11"R
Paper size
64 - 80g/m² 
(Cover: 64 - 128g/m²)
Book tray stacking type
Fixed
Quantity of paper to be stapled 10 sets (6 - 10 pages)
20 sets (1 - 5 pages)(80g/m²)
Type
Punch unit
No. of punch holes
AR-PN1A
AR-PN1B
AR-PN1C
AR-PN1D
2 holes
2 / 3holes
4 holes
4 holes
Size of paper 
applicable for punching
Max. A3, Min. B5R
Name
Content
Life
Product 
name
Remark
Staple cartridge Staple cartridge x 3 5000 x 3
AR-SC2
[01]INTRODUCTION.fm  1 ページ  2004年4月28日 水曜日 午後4時59分
Display

Sharp AR-F14 Service Manual ▷ Download

  • DOWNLOAD Sharp AR-F14 Service Manual ↓ Size: 593.05 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AR-F14 in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-F14 Copying Equipment. Information contained in Sharp AR-F14 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.