DOWNLOAD Sharp DV-HR400H (serv.man4) Service Manual ↓ Size: 11.03 MB | Pages: 127 in PDF or view online for FREE

TITLE PROTECTION IS SET.
CANCEL TITLE PROTECTION
BEFORE DUBBING.

PROGRAM IS COPY PROTECTED.
CANNOT DUB TO THIS DISC.

CANNOT DUB TO THIS DISC.

CANNOT DUB FROM THIS DISC.

• Occurs when you attempt to dub a

title containing a “Copy Once” part
for which title protection has been
set.

• Occurs if you attempt to dub a title

containing a “Copy Once” part to
DVD-R or a non-CPRM compatible
DVD-RW.

• Occurs if an unrecordable disc is

loaded (i.e. when the maximum
number of titles or chapters is
exceeded, when the disc is
protected, when the disc is
scratched or dirty, or when the disc
is a ROM disc).

• Occurs when a disc other than a

DVD-RW/R is loaded.

• If a title contains a “Copy Once”

part, you can only move the
original. If title protection is set for a
title, you cannot move it, so perform
dubbing (movement) after cancel-
ling title protection.

• Dub in VR mode to a CPRM-

compatible DVD-RW.

• Replace with a recordable disc

(Page 10).

• Dub from a DVD-RW/R disc.

CANNOT MAKE ANY MORE SELEC-
TIONS.

CANNOT SPECIFY THIS POSITION.

CHAPTER IS FULL. CANNOT
OPERATE.

CANNOT COMBINE THESE CHAP-
TERS.

• Occurs if you attempt to select

more than 20 titles (chapters) when
you perform Erase Selected Title.

• Occurs if you attempt to designate

a range shorter than 3 seconds and
edit.

• Occurs if the editing result exceeds

the upper limit of total number of
chapters (999).

• Occurs if you attempt to combine

chapters which cannot be com-
bined. (Chapters created when you
erase a scene or chapter in a single
title cannot be erased).

• Erase a maximum of 20 titles

(chapters) at a time.

• Designate a range of 3 seconds or

more. (If you designate a range of 3
seconds or more, you can
designate in frame units.)

• Edit after erasing unnecessary

chapter markers by combining
chapters.

THE GUIDE Plus+ SYSTEM IS NOT
AVAILABLE DURING PLAYBACK,
EDIT, ETC.

• Occurs if you press GUIDE to call

up the GUIDE Plus+ system during
playback, edit, etc.

• Quit playback, edit etc. and try

again.

HR480H-117-127

2005.3.23, 5:10 PM

123

If you set to Exact Recording but the timer recording programme will not fit into a single
DVD-RW/R, the Recorder will automatically perform Alternative Recording to HDD.
The Recorder will also perform Alternative Recording to HDD if you forget to load a
DVD-RW/R.

Recorded onto some DVD discs are scenes which have been simultaneously shot from
a number of different angles (the same scene is shot from the front, from the left side,
from the right side, etc.). With such discs, you can select the angle on Function Control
Screen to view the scene from different angles.

These numbers are recorded on DVD discs. A title is subdivided into many sections,
each of which is numbered, and specific parts of video presentations can be searched
quickly using these numbers.

This function lets you playback and view a programme while it is being recorded onto
HDD.

This function prevents copying. You cannot record software or broadcast programmes
marked by the copyright holder with a signal which limits copying.

Enhances the fine detail of the image and outlines of the objects it contains.

This lets you select things like the subtitle language or overdub audio using a menu
stored on the DVD video disc.

A sound system developed by Dolby Laboratories Inc. that gives movie theatre ambi-
ence to audio output when the product is connected to a Dolby Digital processor or
amplifier.

Setting that increases the average volume of Dolby Digital audio when playing a DVD.

This lets you enjoy Surround audio via analogue connection with a stereo (2ch) TV or
audio equipment.

This is a digital sound system developed by Digital Theater Systems for use in cinemas.
This system uses 6 audio channels and provides accurate sound field positioning and
realistic acoustics. (By connecting a DTS Digital Surround decoder, you can also listen
to DTS Digital Surround sound.)

This function is used when dubbing from HDD to DVD. It automatically selects the
recording mode according to the recording time of the title so that the recording will fit
into a single disc.

This function automatically changes the recording mode to prevent recordings from
running out before they are finished due to a lack of available DVD disc space by
comparing the available disc space and the time required for the timer recording.

This is done to enable playback of discs (Video mode) recorded with this Recorder
using other DVD-RW and DVD-R compatible DVD players. (We do not guarantee that
playback will be possible with all DVD players.)
The DVD players which can play back VR mode discs are those with an “

” indica-

tion.

Continued on Next Page |||

HR480H-117-127

05.3.23, 5:11 PM

124

LB

4:3

PS

4:3

This is a jack in the back of the Recorder to connect Infrared transmitter through G-LINK
cable so that you can control your external receiver from the Recorder.

This is a channel from which you can download the GUIDE Plus+ TV listing data. You
should tune in to the Host Channel in your country.

This allows you to use the HDD or a DVD-RW disc in this Recorder. If you initialise a
disc, all of the programmes recorded on it are erased.

Screen size that cuts off the top and bottom of the image to allow playing of wide-
screen (16:9) software on a connected 4:3 TV.

This is a feature of DVD video discs. This function makes it possible to record multiple
different audio tracks for the same video, so you can enhance your enjoyment by switch-
ing audio. (You can enjoy this function with discs recorded with multiple audio tracks.)

A video (title) recorded from a TV broadcast or external input is called an “Original”.

Screen size that cuts off the sides of the image to allow playing of wide-screen (16:9)
software on a connected 4:3 TV.

In some digital broadcasts and DVD video discs, a control level for disc viewing is set
depending on the age of the viewer. With this Recorder, you can set the control level for
viewing such broadcasts and discs.

A set of titles created by copying just the needed scenes from original titles is called a
“Play List”. (The original titles remain as they are.)

This information is recorded on video CDs (version 2.0). This allows you to actively
select the sections to be viewed or listened to, using a menu displayed on the TV.

This function is used to select the picture quality of dubbed titles at the time of dubbing.

Continued on Next Page |||

HR480H-117-127

05.3.23, 5:11 PM

125

This is a list screen which lets you check the recorded programmes (titles) in list form.
You can select either Thumbnail or Title List as the REC LIST.

Number identifying a geographic region of compatibility for a DVD.

This is the type of the remote control signal for operating the recorder. There are two
types of remote control signal: “Remote Control No. 1” (RC-1) and “Remote Control No.
2” (RC-2).

If you stop playback while it is in progress, the Recorder stores the stop position in
memory, and this function lets you playback from that stopping point.

This function lets you play back and view already recorded programmes while you are
recording. (However, you cannot play back from a DVD while recording to the DVD.)

This returns to the start of the chapter (or track) being played, or skips to the next
chapter (or track).

These are the printed lines appearing at the bottom of the screen which translate or
transcribe the dialogue. They are recorded on DVD discs.

This indicates the play time which has elapsed from the start of a disc or a title. It can
be used to find a specific scene quickly. (It may not work with some discs.)

This Recorder is designed so you can automatically record the programme being
viewed to the HDD by pressing the TIME SHIFT button. The automatically recorded
programme can be viewed using other types of playback.

In a DVD video disc, this is the menu for selecting things like the chapter to be played
back and the subtitle language. In some DVD video discs, the title menu may be called
the “Top Menu”.

These numbers are recorded on DVD discs. When a disc contains two or more movies,
these movies are numbered as title 1, title 2, etc.

These numbers are assigned to the tracks which are recorded on video CDs and Audio
CDs. They enable specific tracks to be located quickly.

VBR is the abbreviation for Variable Bit Rate control.  This feature performs control by
varying the bit rate (the amount of code transferred in a fixed period of time) by assign-
ing a larger amount of code to complex video images such as sections containing rapid
movement or sections containing sudden changes in colour, and assigning a smaller
amount of code in the opposite cases.

This is a recording format for making DVD-RW/R discs playable with other commercially
available DVD players. (We do not guarantee that playback will be possible with all DVD
players.)

This recording format is the basic DVD-RW recording format, and lets you enjoy the
various editing functions available with this Recorder.

Windows Media Audio. A format for encoding digital audio files. Compresses data at
higher rates than MP3.

HR480H-117-127

05.3.23, 5:11 PM

126