DOWNLOAD Sharp XL-UR230H Service Manual ↓ Size: 4.21 MB | Pages: 59 in PDF or view online for FREE

8

XL-UR2110H

XL-UR250H

XL-UR230H

This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record on
them. Some audio CD-R and CD-RW discs may not be playable due
to the state of the disc or the device that was used for recording.  

MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. 
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
z This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and

VBR files.

z During VBR file playback, time counter in the display may differ

from its actual playback time.

z Bitrate which is supported by MP3 is 32 ~ 320 kbps.

WMA:                                                                                                       
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for Win-
dows Media Player.   
z “MP3” and “WMA” indicator will light up after the unit reads

information on an MP3 or WMA disc.

z Bitrate which is supported by WMA is 64 ~ 160 kbps.
 
Auto power on function:
When you press any of the following buttons, the unit turns on.
z CD button (main unit and remote control): The unit turns on and

the “CD” function is activated.

z CD   /   button on the remote control: The unit turns on and CD

playback starts (regardless of the last function).

z

 /   button on the main unit: The unit turns on and playback of

the last function starts (CD,TUNER,VIDEO/AUX/USB).

Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.

XL-UR2110H

XL-UR250H

XL-UR230H

z Playback will begin from track 1 on DISC 1. After that disc

finishes playing, the next disc will be automatically played.

z After the last track on the fifth disc is played, the unit will stop

automatically.

z When there is no disc in one of the disc trays (1 - 5), the empty

tray will be skipped to the next tray with a disc.

To exchange other discs whilst playing a disc:
Press one of the   1 -   5 buttons for the stopped disc and within 5
seconds, press the   OPEN/CLOSE button and exchange discs.

To remove the discs:
In the stop mode, press the   1 -   5 buttons and within 5 seconds,
press the   OPEN/CLOSE button.

To skip to a desired disc:
Press one of the   1 -   5 buttons and within 5 seconds, press the

 (CD  ) button.

Caution:
z Do not place two discs in the same tray.
z Do not play discs of special shapes (heart, octagon, etc).                     

It may cause malfunctions.

z Do not push the disc tray whilst it is moving.
z If the power fails whilst the tray is open, wait until the power is

restored.

z If the disc tray is stopped with force, “ER-CD21” will appear on the

display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.

z If TV or radio interference occurs during CD operation, move the

unit away from the TV or radio.

z If a disc is damaged, dirty, or loaded upside down, the disc will be

skipped.

Be sure to place 8 cm (3") disc in the middle of the disc trays.

z Due to the structure of the disc information, it takes longer to 

read an MP3/WMA disc than a normal CD (approximately 20 
to 90 seconds).

Total number of
tracks on the disc

Total playing
time of the disc

Total number
of files

MP3 indicator

TOTAL indicator

WMA indicator

Disc play indicator

8

XL-UR2110H

XL-UR250H

XL-UR230H

„ Various disc functions

Press in the stop 
mode.

Press in the playback 
mode.

Press in the playback 
mode. Press the   /   
button to resume play-
back from the paused 
point.

Press in the playback 
or stop mode.

If you press the button 
in the stop mode, 
press the   /   button 
to start the desired 
track.

Press and hold down 
in the playback mode.

Release the button to 
resume playback.

z Track up/track down is possible only within individual disc.

z Fast forward/fast reverse is possible only within individual disc.

z When the end of the last track is reached during fast forward,

“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.

z Rewritable multi-session discs which writing is not finished, can

still be played.

z When a disc (CD, WMA or MP3) is input, “TOC READING” will be

displayed for several seconds depending on the number of files in
the disc. If this indication is displayed for an indefinite period of
time due to unspecified file being played or external noise etc.,
switch off the main AC power supply and then switch it on again.

XL-UR2110H

XL-UR250H

XL-UR230H

„ To specify a disc to play

You can play a disc by specifying the disc number.

z Playback will begin from track 1 on the chosen disc.
z After the last track on the last disc is played, the unit stops auto-

matically.

Note:
If a disc tray with no disc is selected, playback will not start and the
disc indicator will disappear.

To stop playback:
Press the   (CD  ) button.

„ Direct track search

By using the direct search buttons, the desired tracks on the current
disc can be played.

Notes:
z A track number higher than the number of tracks on the disc

cannot be selected.

z During random play, direct search is not possible.

To stop playback:
Press the   (CD  ) button.

                          Selected disc number

Within 5 seconds, press the   /   button on the main unit.

Selected track number

 

z The direct search buttons allow you to select up to number 9.
z When selecting number 10 or higher, use the “+10” button.

 

1 Press the “+10” button once.

2 Press the “1” button.

3 Press the “3” button.

1 Press the “+10” button twice.

2 Press the “1” button.

3 Press the “3” button.

4 Press the “0” button.