Sharp CD-MPS660H (serv.man9) User Manual / Operation Manual ▷ View online
03/12/19
CD-MPS660H(H)E4.fm
E-37
ENGLISH
CD-MPS660H
TINSZA035AWZZ
Advanc
e
d Featu
res
Timer and sleep operation (continued)
Note:
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
Note:
The timer can also be set with the remote control.
The timer can also be set with the remote control.
12
When the preset time is reached, playback or recording will
start.
start.
The volume will increase gradually until it reaches the preset
volume.
volume.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is cancelled. Cancel the daily tim-
er when it is not in use.
ue until the daily timer setting is cancelled. Cancel the daily tim-
er when it is not in use.
When performing timer playback or recording using another unit con-
nected to the GAME INPUT sockets, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
nected to the GAME INPUT sockets, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the
or
button to select
"ONCE CALL" or "DAILY CALL", and press the MEMORY/SET
button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the
or
button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-
ton.
Timer will be cancelled (the setting will not be cancelled).
ton.
Timer will be cancelled (the setting will not be cancelled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the
or
button to select
"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
03/12/19
CD-MPS660H(H)E4.fm
E-38
ENGLISH
8
CD-MPS660H
TINSZA035AWZZ
Advanc
e
d Featu
res
"
Sleep operation
The radio, CD, MP3 disc and cassette tape can all be turned off
automatically.
automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.
"
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record
radio programmes whilst sleeping.
For example, you can fall asleep listening to the CD and record
radio programmes whilst sleeping.
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button
to
select
"SLEEP", and press the MEMO-
RY/SET button.
RY/SET button.
4
Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
!
3 hours - 5 minutes 5-minute intervals
!
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY/SET but-
ton.
ton.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
eration finishes.
1
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select
"SLEEP X : XX".
"X : XX" is remaining sleep time.
"X : XX" is remaining sleep time.
!
The remaining sleep time is displayed for about 10 seconds.
!
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY/SET button.
pressing the MEMORY/SET button.
1
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select
"SLEEP OFF", and press the MEMORY/SET button.
1
Set the sleep time (see left, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 35 - 36).
(steps 2 - 10, pages 35 - 36).
Sleep timer setting
Timer playback or
recording setting
recording setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback or recording
start time
start time
End time
1 minute - 3 hours
Desired time
03/12/19
CD-MPS660H(H)E4.fm
E-39
ENGLISH
CD-MPS660H
TINSZA035AWZZ
Advanc
e
d Featu
res
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
able lead as shown below.
"
Listening to sounds of game, VCR, DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
To prevent noise interference, place the unit away from the televi-
sion.
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
!
GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
turns on and the "GAME" function is activated.
!
/ button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
GAME).
"
To record sounds of game, VCR, etc.
Red
White
Yellow
Yellow
To the line output sockets
To video
input socket
input socket
RCA lead
(not supplied)
(not supplied)
Video cable
(not supplied)
(not supplied)
Video cable
(not supplied)
(not supplied)
Yellow
TV
Yellow
Red
White
1
2
Connect a TV to the rear VIDEO OUT socket.
Switch the TV input to auxiliary.
3
Press the ON/STAND-BY button to turn the power on.
4
Press the GAME/VIDEO button.
5
Play the connected equipment.
You can enjoy sounds from the supplied speakers and images
on the TV.
on the TV.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the GAME/VIDEO button.
3
Press the
button.
4
Press the / button.
5
03/12/19
CD-MPS660H(H)E4.fm
E-39
ENGLISH
CD-MPS660H
TINSZA035AWZZ
Advanc
e
d Featu
res
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
able lead as shown below.
"
Listening to sounds of game, VCR, DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
To prevent noise interference, place the unit away from the televi-
sion.
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
!
GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
turns on and the "GAME" function is activated.
!
/ button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
GAME).
"
To record sounds of game, VCR, etc.
Red
White
Yellow
Yellow
To the line output sockets
To video
input socket
input socket
RCA lead
(not supplied)
(not supplied)
Video cable
(not supplied)
(not supplied)
Video cable
(not supplied)
(not supplied)
Yellow
TV
Yellow
Red
White
1
2
Connect a TV to the rear VIDEO OUT socket.
Switch the TV input to auxiliary.
3
Press the ON/STAND-BY button to turn the power on.
4
Press the GAME/VIDEO button.
5
Play the connected equipment.
You can enjoy sounds from the supplied speakers and images
on the TV.
on the TV.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the GAME/VIDEO button.
3
Press the
button.
4
Press the / button.
5