Sharp CD-MPS660H (serv.man8) User Manual / Operation Manual ▷ View online
03/12/19
CD-MPS660H(H)E3.fm
E-26
ENGLISH
8
CD-MPS660H
TINSZA035AWZZ
Tape
Recordi
n
g
!
Various tape functions
Caution:
"
To remove the cassette, press the button, and then open the
compartment.
compartment.
"
Before changing from one tape operation to another, press the
button.
button.
"
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
Recording on a cassette tape
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
mode.
Stop
Press in the playback,
fast forward or fast re-
wind mode.
fast forward or fast re-
wind mode.
Fast for-
ward/Fast
rewind
ward/Fast
rewind
Press in the playback
or stop mode.
or stop mode.
(TAPE 2
only)
only)
Before recording:
"
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
"
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
"
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
on the recorded signal (Variable Sound Monitor).
"
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
Erase-prevention tab of cassette tapes:
"
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
"
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B
Tab for side A
03/12/19
CD-MPS660H(H)E3.fm
E-27
ENGLISH
CD-MPS660H
TINSZA035AWZZ
Tape
Recordi
n
g
Recording on a cassette tape (continued)
!
Recording from a CD or MP3 disc
You can record the desired disc using the DIRECT PLAY button.
To stop recording:
Press the button.
The disc and tape will stop.
Press the button.
The disc and tape will stop.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
4
Press the
button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the DIRECT PLAY button to start
recording.
recording.
"
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
"
Playback of the disc will start approximately 7 seconds after
the tape starts.
the tape starts.
22
SHARP
T
INSZA0
3
5
A
W
Z
Z
Z
(H
)
)
03/12/19
CD-MPS660H(H)E3.fm
E-28
ENGLISH
8
CD-MPS660H
TINSZA035AWZZ
Tape
Recordi
n
g
To stop recording:
Press the button.
The disc and tape will stop.
Press the button.
The disc and tape will stop.
!
Recording from the radio
To interrupt recording:
Press the
Press the
button.
To stop recording:
Press the button.
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
!
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
!
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
Make sure that the TAPE 1 is not in use.
1 Perform steps 1 - 5 in "Recording from a CD or MP3 disc" on page
27.
2 Within 5 seconds, press the / button.
1 Programme discs and tracks (see pages 18, 22).
2 Press the
2 Press the
button.
3 Press the / button.
1
Tune in to the desired station (see page 23).
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
with the side to be recorded on facing you.
3
Press the
button.
Recording will be paused.
4
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
3
Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
the display.
4
Press the
button.
Recording will be paused.
5
Press the / button to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
ment with the side to be erased facing toward you.
2
Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
play.
3
Press the
button.
4
Press the / button to start erasing.
TAPE 1
TAPE 2
23
SHARP
T
INSZA0
3
5
A
W
Z
Z
Z
(H
)
)
Display