DOWNLOAD Sharp AR-PE1 (serv.man40) Service Manual ↓ Size: 396.8 KB | Pages: 18 in PDF or view online for FREE

Model
AR-PE1 (serv.man40)
Pages
18
Size
396.8 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / ARPE1-003 Setting up the ARPE1 Fiery Controller on a Windows 2000 Network
File
ar-pe1-sm40.pdf
Date

Sharp AR-PE1 (serv.man40) Service Manual / Technical Bulletin ▷ View online

Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 023.doc
Page:  1 of 18
Installation of the ARPE1 on a Windows 2000
Network
Model Name:
ARPE1 Fiery Controller
Pre-requisites:         The Microsoft Windows 2000 CDRom
The Sharp ARPE1 and User Software CD
An ARPE1 and ARC150 colour copier
The Windows 2000 system should have TCP/IP installed and a valid
IP Address and Subnet Mask configured.
Note: 
By default, Windows 2000 Sever has the Print Services for Unix installed
(LPR service). Windows 2000 Professional however does not have this
service installed. If you are installing on Windows 2000 Professional,
perform task 1 listed below before you proceed to the later steps.
Items in Italics indicate icons, buttons, or menu options during installation.
Procedure:                This installation consists of four separate tasks:
1.  Setup Print Services for Unix (LPR Service)
2.  Setup of the ARPE1.
3.  Installation of the Print Driver.
4.  Configuration of the Print Driver.
Setup of Print Services for Unix (LPR Service)
1. 
To begin the installation, click on Start-Settings-Network & Dialup
Connections.
                          
Date: 
30th March 2000
Model: ARPE1
Ref:
003
Colour Code:
Orange (C)
Page:
1 of 18
NIS SYSTEMS SUPPORT
BULLETIN
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 023.doc
Page:  2 of 18
1.1 
 Click on Advanced-Optional Networking Components.
1.2  The following screen will appear. Highlight Other Network File and Print Services and
press the Details button.
1.3  Ensure that the Print Services For Unix is checked and then click on OK. Click on Next
and then Finish.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 023.doc
Page:  3 of 18
1.4 The LPR service will now be loaded. The Windows 2000 CD-ROM may be required.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 023.doc
Page:  4 of 18
Setting up the ARPE1
2. Restart the ARPE1. When the ARPE1 completes its power up sequence, the screen
below will be displayed on the LCD panel.
2.1 
Press the Menu button (left middle button) once to enter the Functions screen.
2.2 
Press the Scroll Down button (left lower button) once on the ARPE1 to view the
remaining selections for the Functions screen.
2.3 
Select Run Setup by pressing the second button on the right-hand side. The screen
prompts you to Continue to Setup.  Press the controller’s button next to OK and the
ARPE1 enters the setup mode.
2.4 
The Setup screen appears on the controller’s display.
  Server Name
  Idle
  4524 MB                         1.0
  Info
Print Pages
Suspend Printing
Resume Printing
Shut Down
Functions
 
Continue to Setup?
 
Yes
 
Run Setup  
OK
 
Clear Server
Run Setup
Run Diagnostics
Calibration
Functions
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Page of 18
Display

Sharp AR-PE1 (serv.man40) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-PE1 (serv.man40) Service Manual ↓ Size: 396.8 KB | Pages: 18 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-PE1 (serv.man40) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-PE1 (serv.man40) Copying Equipment. Information contained in Sharp AR-PE1 (serv.man40) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.