DOWNLOAD Panasonic TH-98LQ70U / TH-98LQ70W / TH-98LQ70C Service Manual ↓ Size: 25.88 MB | Pages: 75 in PDF or view online for FREE

DIS-3

SECTION 2 DISASSEMBLY PROCEDURES

<TH-98LQ70>

【

Attention when disassembling】

* Be sure to unplug before disassembling and replacing the parts.  
* When replacing modules or board, please wait for 1 minute after the power supply end in order to  
   make it discharge from an electrolytic condenser.
* When using a crane, please work putting a glove and  protective helmets.
* The flow indicate disassembling procedure of each part. Assembling process will be completed 
   in the opposite order of the disassembling process.

* Verify by giving the flexible cables a very slight pull.

2-1-1.　Type 1

■

How to connect

■

How to disconnect

1. Insert the FFC in the direction of arrow① and

1. Open the coupler lid of FFC in the direction of arrow ①.

　　

hook the concavity of FFC to the rib of connector.

2. Pull  the FFC out in the direction of arrow②.

2. Close the coupler lid of FFC in the direction of arrow②.

■

How to connect

1. Insert the FFC in the direction of arrow①.

2-1-3.　Type 3

2. Close the coupler lid of FFC in the direction of arrow②.

■

How to disconnect

1. Open the coupler lid of FFC in the direction of arrow ①.
2. Detach from rib and pull  the FFC out in the direction
     of arrow②.

2-1-2.　Type 2

■

How to disconnect

1. Open the coupler lid of FFC in the direction of arrow ①.
2. Pull  the FFC out in the direction of arrow②.

■

How to connect

1. Insert the FFC in the direction of arrow① and
　　

hook the hole of FFC to the rib of connector.

2. Close the coupler lid of FFC in the direction of arrow②.

DIS-4

SECTION 2 DISASSEMBLY PROCEDURES

<TH-98LQ70>

2-1-4.　Type 4

2-1-6.　Type 6

■

How to disconnect

■

How to disconnect

1. Open the coupler lid of FFC in the direction of arrow ①.

1. Pull the slider towards an operator.

2. Pull  the FFC out in the direction of arrow②.

2. Detach from rib and pull  the FFC out in the direction
    of white arrow.

■

How to connect

■

How to connect

1. Insert the FFC in the direction of arrow①.

1. Insert the FFC in the direction of white arrow and

2. Close the coupler lid of FFC in the direction of arrow②.

　　

hook the hole of FFC to the rib of slider.

2. Push the slider of FFC in the direction of black arrow.

2-1-5.　Type 5

■

How to disconnect

2-1-7.　Type 7

1. Open the coupler lid of FFC in the direction of arrow ①.

■

How to disconnect

2. Pull  the FFC out in the direction of arrow②.

1. Slide the holder of connector in the direction of arrow ①.
2. Pull  the FFC out in the direction of arrow②.

■

How to connect

1. Insert the FFC in the direction of arrow① and
　　

hook the concavity of FFC to the rib of connector.

■

How to connect

2. Close the coupler lid of FFC in the direction of arrow②.

1. Insert the FFC in the direction of arrow①.
2. Slide the holder of FFC in the direction of arrow②.

DIS-5

SECTION 2 DISASSEMBLY PROCEDURES

<TH-98LQ70>

2-1-8.　Type 8

■

How to disconnect

1. Push the hook of FFC connector in the direction
　

 of arrow① and pull the FFC out in the direction of arrow②.

■

How to connect

1. Lock the FFC securely to push both edge of connector parallel 
　　

in the direction of black arrow.

DIS-6

SECTION 2 DISASSEMBLY PROCEDURES

<TH-98LQ70>

* Verify by giving the coupler a very slight pull.

2-2-1.　Type 1

2-2-3.　Type 3

■

How to disconnect

■

How to disconnect

1. Disconnect the coupler  in the direction of arrow②

1. Disconnect the coupler  in the direction of arrow②

　

 while pushing the hook in the direction of arrow①.

　

 while pushing the hook in the direction of arrow①.

■

How to connect

1. Connect the coupler  in the direction of arrow②
　

 while pushing the hook in the direction of arrow①.

■

How to connect

1. Insert the coupler into the deepest part of insertion hole.

2-2-4.　Type 4

■

How to dissconnect

1. Disconnect the coupler  in the direction of arrow②
　

 while pushing the hook in the direction of arrow①.

2-2-2.　Type 2

■

How to disconnect

1. Disconnect the coupler  in the direction of arrow②
　

 while pushing the hook in the direction of arrow①.

■

How to connect

1. Insert the coupler into the deepest part of insertion hole.

■

How to connect

1. Insert the coupler into the deepest part of insertion hole.