Panasonic PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) Service Manual ▷ View online
INF-15
SECTION 1 SERVICE INFORMATION
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
Note
f
Pressing the <MENU> button while the menu screen is displayed will return the previous menu. You can operate in the same way by pressing
the <RETURN> button.
f
Some items may not be adjusted or used depending on the selected signals or input signals to the projector. The menu items that cannot be
adjusted or used are shown in gray characters, and they cannot be selected.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen disappears automatically if no ope
f
For menu items, refer to “Main menu” and “Sub menu”
.
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory
default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP]
menu → [INITIALIZE ALL].
f
Some items cannot be reset by pressing the <DEFAULT> button on the remote control. Adjust these items individually.
Main menu
The main menu consists of the following seven menu items.
When a main menu item is selected, the cursor moves to its sub menu.
When a main menu item is selected, the cursor moves to its sub menu.
Main-menu item
[PICTURE]
[POSITION]
[LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[SECURITY]
[NETWORK]
54 - ENGLISH
OM_VZ580_EN.indd 54
2017/5/9 10:20:53
INF-16
SECTION 1 SERVICE INFORMATION
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
Sub menu
You can set and adjust the items in each submenu.
[PICTURE]
Sub-menu item
Factory default
[PICTURE MODE]
[STANDARD]
[CONTRAST]
[0]
[BRIGHTNESS]
[0]
[COLOR]
[0]
[TINT]
[0]
[SHARPNESS]
[0]
[COLOR TEMPERATURE]
[DEFAULT]
[GAMMA]
[0]
[IRIS]
[OFF]
[DAYLIGHT VIEW]
[ON]
[DIGITAL CINEMA REALITY]
[ON]
[NOISE REDUCTION]
[OFF]*
1
[TV-SYSTEM]
[AUTO]
[RGB/YP
B
P
R
] / [RGB/YC
B
C
R
]
[AUTO]
[RGB-SYSTEM]
[1280x768/60]*
2
*1 It depends on the [PICTURE MODE].
*2 It depends on the input signal.
[POSITION]
Sub-menu item
Factory default
[REALTIME KEYSTONE]
[ON]
[SCREEN ADJUSTMENT]
-
[SHIFT]
-
[DOT CLOCK]
[0]
[CLOCK PHASE]
[0]
[OVER SCAN]
[0]*
1
[ASPECT]
[NORMAL]*
1
[FRAME LOCK]
[ON]
*1 It depends on the input signal.
[LANGUAGE]
[DISPLAY OPTION]
Sub-menu item
Factory default
[COLOR ADJUSTMENT]
[OFF]
[COLOR CORRECTION]
[OFF]
[ON-SCREEN DISPLAY]
-
[HDMI SIGNAL LEVEL]
[AUTO]
[CLOSED CAPTION SETTING]
-
[SCREEN SETTING]
-
[STARTUP LOGO]
[DEFAULT LOGO]
[AUTO SETUP SETTING]
[AUTO]
[SIGNAL SEARCH]
[ON]
[BACK COLOR]
[BLUE]
[P-TIMER]
-
[OTHER FUNCTIONS]
-
f�
Various menus, settings, adjustment screens, control button names, etc., are displayed in the selected language.
f�
The language can be changed to English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Finnish, Norwegian, Danish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh,
Vietnamese, Korean, Chinese, Japanese and Thai.
INF-17
SECTION 1 SERVICE INFORMATION
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
[PROJECTOR SETUP]
Sub-menu item
Factory default
[STATUS]
-
[COMPUTER2 SELECT]
[COMPUTER2 IN]
[PROJECTOR ID]
[ALL]
[INITIAL START UP]
[LAST MEMORY]
[PROJECTION METHOD]
[AUTO]
[LAMP POWER]
[NORMAL]
[ECO MANAGEMENT]
-
[EMULATE]
[DEFAULT]
[FUNCTION BUTTON]
-
[AUDIO SETTING]
-
[TEST PATTERN]
-
[FILTER COUNTER]
-
[DC OUT]
[ON]
[INITIALIZE ALL]
-
[SECURITY]
Sub-menu item
Factory Default
[PASSWORD]
[OFF]
[PASSWORD CHANGE]
-
[TEXT DISPLAY]
[OFF]
[TEXT CHANGE]
-
[MENU LOCK]
[OFF]
[MENU LOCK PASSWORD]
-
[CONTROL DEVICE SETUP]
-
[NETWORK]
Sub-menu item
Factory default
[WIRED LAN]
-
[PROJECTOR NAME]
-
[NETWORK CONTROL]
[ON]
[NETWORK STATUS]
-
[INITIALIZE]
-
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f
Sub-menu items and factory default settings differ depending on the selected input.
56 - ENGLISH
Chapter 4 Settings - On-screen menu
OM_VZ580_EN.indd 56
2017/5/9 10:20:54
INF-18
SECTION 1 SERVICE INFORMATION
<VZ585N/VW545N/VX615N/VZ580/VW540/VX610>
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "ON-SCREEN DISPLAY" of the main menu "DISPLAY OPTION".
3. Select a sub menu "INPUT GUIDE" and press the [ENTER] button for more than 3 seconds. The projector set into the
service mode and the "EXTRA OPTION" menu will be displayed on the screen.
3. 2. Cancelling the Service Mode
1. In the service mode, press the [MENU] button on the control panel of the projector or on the remote controller to cancel the
service mode. The menu of "User mode" will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" menu will be displayed.
(;75$237,21
)5((=(0(66$*(
21
)$1)8//02'(
2))
[S
$872
(08/$7(
%$8'5$7(
%$8'5$7(
9(56,21
0$
,13876(/(&7
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
6(/)&+(&.
7(673$77(51
)/,&.(5$'-867
02'(/126(77,1*
3$1(/7<3(6(77,1*
/
:+,7(%$/$1&($'-867
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
.(<6721(&$/,%5$7,21
&/2*6(1625&$/,%5$7,21
&/2*6+87'2:121
9$/(16
',*,7$//,1.6(783
5*%3,;(/$'-867
*+267)%&$/,%5$7,21
+'0,(48$/,=(5
6,*1$/6(16,7,9,7<
&/$03326,7,21
7+5(6+2/'6:
:$,781087(P6
1.
2.
3.
4.
5.
6.
3.
4.
5.
6.
7.
8.
9.
9.
10.
11.
12.
13.
14.
15.
16.
13.
14.
15.
16.
17.
18.
19.
20.
19.
20.
21.
22.
23.
23.
24.
25.
25.
Click on the first or last page to see other PT-VZ585N / PT-VW545N / PT-VX615N / PT-VZ580 / PT-VW540 / PT-VX610 (serv.man3) service manuals if exist.