Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual ▷ View online
8
PREFACE
<VW360/VX430/VX431K>
Operating environment
Operating environment temperature *
3
:
0 °C (32 °F) to 40 °C (104 °F)
(Elevation: below 1 400 m (4 593'); [HIGH ALTITUDE MODE]: [OFF])
0 °C (32 °F) to 30 °C (86 °F)
(Elevation: 1 400 m (4 593') ~ 2 000 m (6 562′); [HIGH ALTITUDE MODE]: [HIGH1])
0 °C (32 °F) to 30 °C (86 °F)
(Elevation: 2 000 m (6 562′) ~ 2 700 m (8 858′); [HIGH ALTITUDE MODE]: [HIGH2])
Operating environment humidity:
20% to 80% (no condensation)
Remote
control
Power supply
DC 3 V (battery (AAA/R03 or AAA/LR03 Type ) x 2)
Operating range Approx. 7 m (22'11-5/8") (when operated directly in front of receptor)
Weight
Weight
63 g (2.22 ozs.) (including batteries)
Dimensions
Width : 44 mm (1-23/32"), Length : 105 mm (4-1/8"), Height : 20.5 mm (13/16")
*1 Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2 This is an average value. It may differ depending on individual product.
*3 If the [PROJECTOR SETUP] menu → [LAMP POWER] is set to [NORMAL], [LAMP POWER] will be switched to [ECO] forcibly to protect
the projector when the operating environment temperature becomes 35 °C (95 °F) or higher.
Note
f
The part numbers of accessories and separately sold components are subject to change without notice.
r
Terminal
<COMPUTER 1 IN> terminal
1 set high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
(The SYNC/HD and VD terminals do not support 3 value SYNC.)
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
<COMPUTER 2 IN /1 OUT>
terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
(The SYNC/HD and VD terminals do not support 3 value SYNC.)
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN> terminal
1 set, pin jack 1.0 V [p-p] 75 Ω
<HDMI 1 IN>/<HDMI 2 IN>
terminal
2 sets, HDMI 19 pin, HDCP compatible, Deep Color compatible
Audio signal
Audio signal
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN 1>/<AUDIO IN 2>
terminal
2 sets, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or more
<AUDIO IN 3> terminal
1 set, pin jack x 2 (L-R) 0.5 V [rms], input impedance 22 kΩ or more
<VARIABLE AUDIO OUT>
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less
<USB A (VIEWER/
WIRELESS)> terminal
1 set, USB connector (type A)
Memory Viewer / Wireless module (Model No.: ET-WML100) compatible
<USB B (DISPLAY)> terminal
1 set, USB connector (type B), only for USB display function
<SERIAL IN> terminal
1 set, D-Sub 9 p, RS-232C compliant, for computer control
<LAN> terminal
1 set, RJ-45, for network connection, PJLink (Class 1) compatible, 10Base-T/100Base-TX
ENGLISH - 131
Chapter 7 Appendix - Specifications
9
PREFACE
<VW360/VX430/VX431K>
r
Wireless LAN
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model
No.: ET-WML100).
Compliance standards
IEEE802.11a/b/g/n
Transmission method
DSSS, OFDM
Frequency range
(Channel)
2 412 MHz to 2 462 MHz (1 to 11 ch)
Transmission speed
(Standard value)
IEEE802.11b
Maximum 11 Mbps
IEEE802.11g
Maximum 54 Mbps
IEEE802.11n
Maximum 150 Mbps
Encryption method
WPA2-PSK(AES)
r
Compatible signals
Refer to “List of compatible signals” of Operting Instructions
for the types of video signals that can be used with the
projector.
For video signal input
Horizontal : 15.73 kHz Vertical : 59.94 Hz
Horizontal : 15.63 kHz Vertical : 50 Hz
For Y/C signal input
Horizontal : 15.73 kHz Vertical : 59.94 Hz
Horizontal : 15.63 kHz Vertical : 50 Hz
For RGB signal input
f
Displayable resolution: 640 x 400 to 1 920 x 1 200
f
Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
signal input
f
Displayable resolution: 480i/576i to 1 920 x 1 080
f
Dot clock frequency: 148.5 MHz or less
For HDMI signal input
f
Displayable resolution for movie-based signals: 480i/576i
*1
to 1 920 x 1 080
Displayable resolution for still image signals: 640 x 400 to 1 920 x 1 200 (non-interlaced)
f
Dot clock frequency: 25 MHz - 162 MHz
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
132 - ENGLISH
10
PREFACE
<VW360/VX430/VX431K>
3. Dimensions
Dimensions
<Unit : mm (inch)>
113 (4-7/16")
255 (10-1/32")
352 (13-27/32")
24 (15/16")
98 (3-27/32")
90 (3-17/32")
326 (12-27/32")
198 (7-25/32")
59 (2-5/16")
Actual dimension may differ by product.
ENGLISH - 133
Chapter 7 Appendix - Dimensions
SECTION
1
INF-1
(2018-06)
CONTENTS
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1. 1. Remote controls
1. 2. Projector body
1. 3. Control panel
1. 4. Connecting terminals
1. 2. Projector body
1. 3. Control panel
1. 4. Connecting terminals
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
2. 1. On-screen
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
4. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-13
4. 1. Before service operation
4. 2. Service
4. 3. Note on the parts replacement work
4. 4. Replacement of consumable parts
4. 5. Security password
4. 2. Service
4. 3. Note on the parts replacement work
4. 4. Replacement of consumable parts
4. 5. Security password
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-20
5. 1. LAMP/WARNING indicators
5. 2. Shutdown system
5. 3. Execution procedure of Self-diagnosis
5. 4. Lamp log data acquisition method
5. 5. Troubleshooting
5. 2. Shutdown system
5. 3. Execution procedure of Self-diagnosis
5. 4. Lamp log data acquisition method
5. 5. Troubleshooting
SECTION 1 SERVICE INFORMATION
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.