Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual ▷ View online
INF-7
SECTION 1 SERVICE INFORMATION
<VW360/VX430/VX431K>
f
For some items, press qw to display an individual adjustment screen with a bar scale as shown below.
Note
f
Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
f
Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted or
used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME LOCK] may not be displayed
depending on the input signal.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately 5 seconds.
f
For menu items, refer to “Main menu”
and “Sub-menu”.
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute the [PROJECTOR SETUP] menu →
[INITIALIZE ALL] .
f
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the cursor moves to its sub menu.
Main-menu item
[PICTURE]
[POSITION]
[LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[SECURITY]
[NETWORK/USB]
ENGLISH - 53
Chapter 4 Settings - Menu navigation
INF-8
SECTION 1 SERVICE INFORMATION
<VW360/VX430/VX431K>
Sub-menu
You can set and adjust the items in each submenu.
[PICTURE]
Sub-menu item
Factory default
[PICTURE MODE]
[STANDARD]
[CONTRAST]
[0]
[BRIGHTNESS]
[0]
[COLOR]*
1
[0]
[TINT]*
1
[0]
[SHARPNESS]
[+8]
[COLOR TEMPERATURE]
[DEFAULT]
[IRIS]
[ON]
[ADVANCED MENU]
-
[DAYLIGHT VIEW]
[ON]
[DIGITAL CINEMA REALITY]*
1
[ON]
[NOISE REDUCTION]*
2
[OFF]
[TV-SYSTEM]*
2
[AUTO]
[RGB/YP
B
P
R
]/[RGB/YC
B
C
R
]*
3
[AUTO]
*1 Only for movie-based signals.
*2 Only when the <VIDEO IN> terminal is selected.
*3 Only when the <COMPUTER 1 IN>/<COMPUTER 2 IN/ 1 OUT>/<HDMI 1 IN>/<HDMI 2 IN>terminal is selected.
Note
f
The factory default settings may vary depending on the picture mode.
[POSITION]
Sub-menu item
Factory default
[REALTIME KEYSTONE]
[ON]
[SCREEN ADJUSTMENT]
-
[SHIFT]
-
[DOT CLOCK]*
1
[0]
[CLOCK PHASE]*
1
[0]
[OVER SCAN]
-
[ASPECT]
- *
2
[FRAME LOCK]*
1
[ON]
*1 Only for still image signals.
*2 It depends on the input signal.
[LANGUAGE]
You can select the language of the on-screen display.
Various menus, settings, adjustment screens, control button names, etc., are displayed in the selected language.
The language can be changed to English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh, Vietnamese, Chinese,
Korean, Japanese and Thai.
[DISPLAY OPTION]
Sub-menu item
Factory default
[ON-SCREEN DISPLAY]
-
[HDMI SIGNAL LEVEL]
[AUTO]
[CLOSED CAPTION
SETTING]
-
[SCREEN SETTING]
-
[STARTUP LOGO]
[DEFAULT LOGO]
[AUTO SETUP SETTING]
[AUTO]
Chapter 4 Settings - Menu navigation
INF-9
SECTION 1 SERVICE INFORMATION
<VW360/VX430/VX431K>
[PROJECTOR SETUP]
Sub-menu item
Factory default
[STATUS]
-
[COMPUTER1 INPUT
SETTING]
[RGB/YP
B
P
R
]
[COMPUTER2 SELECT]
[COMPUTER2 IN]
[PROJECTOR ID]
[ALL]
[INITIAL START UP]
[LAST MEMORY]
[PROJECTION METHOD]
[AUTO]
[HIGH ALTITUDE MODE]
[OFF]
[LAMP POWER]
[NORMAL]
[ECO MANAGEMENT]
-
[EMULATE]
[DEFAULT]
[FUNCTION BUTTON]
-
[AUDIO SETTING]
-
[TEST PATTERN]
-
[FILTER COUNTER]
-
[INITIALIZE ALL]
-
[SECURITY]
Sub-menu item
Factory Default
[PASSWORD]
[OFF]
[PASSWORD CHANGE]
-
[TEXT DISPLAY]
[OFF]
[TEXT CHANGE]
-
[MENU LOCK]
[OFF]
[MENU LOCK PASSWORD]
-
[CONTROL DEVICE SETUP]
-
[NETWORK/USB]
Sub-menu item
Factory default
[WIRED LAN]
-
[NAME CHANGE]
-
[NETWORK CONTROL]
[ON]
[AMX D.D.]
[OFF]
[Crestron Connected(TM)]
[OFF]
[MEMORY VIEWER LIGHT]
-
[STATUS]
-
[INITIALIZE]
-
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f
Sub-menu items and factory default settings differ depending on the selected input.
[SIGNAL SEARCH]
[ON]
[BACK COLOR]
[BLUE]
[WIDE MODE]
-
[SXGA MODE]
-
[P-TIMER]
-
[OTHER FUNCTIONS]
-
Sub-menu item
Factory default
INF-10
SECTION 1 SERVICE INFORMATION
<VW360/VX430/VX431K>
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "ON-SCREEN DISPLAY" of the main menu "DISPLAY OPTION".
3. Select a sub menu "INPUT GUIDE" and press the [ENTER] button for more than 3 seconds. The projector set into the ser-
vice mode and the "EXTRA OPTION" menu will be displayed on the screen.
3. 2. Resetting to User Mode
1. In the service mode, press the [MENU] button on the control panel of the projector or on the remote controller to cancel the
service mode. The menu of "Use mode" will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main firmware.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" menu will be displayed.
EXTRA OPTION
FREEZE MESSAGE
ON
FAN FULL MODE
OFF
VGA60/480p
EMULATE
- BAUD RATE
- VERSION
--- / ---
- INPUT SELECT
SELF CHECK
TEST PATTERN
FLICKER ADJUST
MODEL NO.SETTING
PANEL TYPE SETTING
TEST PATTERN
FLICKER ADJUST
MODEL NO.SETTING
PANEL TYPE SETTING
L
FAN VOLT ADJUST
INPUT AUTO CALIBRATION
WHITE BALANCE ADJUST
ACCELERATION CALIBRATION
CLOG SENSOR CALIBRATION
INPUT AUTO CALIBRATION
WHITE BALANCE ADJUST
ACCELERATION CALIBRATION
CLOG SENSOR CALIBRATION
UNDER 200m
1.
2.
3.
4.
5.
6.
3.
4.
5.
6.
7.
8.
9.
9.
10.
11.
12.
13.
14.
15.
16.
13.
14.
15.
16.
17.
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.