Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual ▷ View online
9
PREFACE
<VW360/VX430/VX431K>
r
Wireless LAN
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model
No.: ET-WML100).
Compliance standards
IEEE802.11a/b/g/n
Transmission method
DSSS, OFDM
Frequency range
(Channel)
2 412 MHz to 2 462 MHz (1 to 11 ch)
Transmission speed
(Standard value)
IEEE802.11b
Maximum 11 Mbps
IEEE802.11g
Maximum 54 Mbps
IEEE802.11n
Maximum 150 Mbps
Encryption method
WPA2-PSK(AES)
r
Compatible signals
Refer to “List of compatible signals” of Operting Instructions
for the types of video signals that can be used with the
projector.
For video signal input
Horizontal : 15.73 kHz Vertical : 59.94 Hz
Horizontal : 15.63 kHz Vertical : 50 Hz
For Y/C signal input
Horizontal : 15.73 kHz Vertical : 59.94 Hz
Horizontal : 15.63 kHz Vertical : 50 Hz
For RGB signal input
f
Displayable resolution: 640 x 400 to 1 920 x 1 200
f
Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
signal input
f
Displayable resolution: 480i/576i to 1 920 x 1 080
f
Dot clock frequency: 148.5 MHz or less
For HDMI signal input
f
Displayable resolution for movie-based signals: 480i/576i
*1
to 1 920 x 1 080
Displayable resolution for still image signals: 640 x 400 to 1 920 x 1 200 (non-interlaced)
f
Dot clock frequency: 25 MHz - 162 MHz
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
132 - ENGLISH
10
PREFACE
<VW360/VX430/VX431K>
3. Dimensions
Dimensions
<Unit : mm (inch)>
113 (4-7/16")
255 (10-1/32")
352 (13-27/32")
24 (15/16")
98 (3-27/32")
90 (3-17/32")
326 (12-27/32")
198 (7-25/32")
59 (2-5/16")
Actual dimension may differ by product.
ENGLISH - 133
Chapter 7 Appendix - Dimensions
SECTION
1
INF-1
(2018-06)
CONTENTS
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1. 1. Remote controls
1. 2. Projector body
1. 3. Control panel
1. 4. Connecting terminals
1. 2. Projector body
1. 3. Control panel
1. 4. Connecting terminals
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
2. 1. On-screen
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
4. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-13
4. 1. Before service operation
4. 2. Service
4. 3. Note on the parts replacement work
4. 4. Replacement of consumable parts
4. 5. Security password
4. 2. Service
4. 3. Note on the parts replacement work
4. 4. Replacement of consumable parts
4. 5. Security password
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-20
5. 1. LAMP/WARNING indicators
5. 2. Shutdown system
5. 3. Execution procedure of Self-diagnosis
5. 4. Lamp log data acquisition method
5. 5. Troubleshooting
5. 2. Shutdown system
5. 3. Execution procedure of Self-diagnosis
5. 4. Lamp log data acquisition method
5. 5. Troubleshooting
SECTION 1 SERVICE INFORMATION
INF-2
SECTION 1 SERVICE INFORMATION
<VW360/VX430/VX431K>
1. The name of each part
1. 1. Remote controls
About your projector
Remote control
1
2
3
4
5
6
7
8
9
9
10
14
13
12
15
16
17
18
17
18
11
Attention
f
Do not drop the remote control.
f
Avoid contact with liquids.
f
Do not attempt to modify or disassemble the remote control.
f
Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
g
Do not use a new battery together with an old battery.
g
g
Make sure the polarities (+ and -) are correct when inserting the batteries.
1. 请勿把旧电池和新电池一起使用。
2. 请勿使用不合规格的电池。
3. 确保电池安装正确。
1.Do not use old battery with new one.
2.Do not use batteries other than the
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
3.Be sure the batteries are inserted properly.
Made in China
1 Power <v/b> button (v Standby / b Power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 Input selection buttons (<COMPUTER 1> / <COMPUTER 2>/
<HDMI 1/2> / <VIDEO> / <MEMORY VIEWER/USB DISPLAY/
NETWORK>)
Switches the input signal to project.
3 <MENU> button / <RETURN> button / asqw buttons /
<ENTER> button
Used to navigate through the menu screen.
The asqw buttons are also used to enter password or
characters for [SECURITY].
4 <FREEZE> button
Pauses the projected image and mute the audio temporarily.
5 Number (<1> - <6>) buttons
Used for entering the ID number in a multiple projector
environment or a password.
6 Remote control signal transmitter
7 <AUTO SETUP> button
7 <AUTO SETUP> button
Used to
perform automatic adjustment while projecting the
image.
8 <MUTE> button
Used to mute the audio.
9 <AV MUTE> button
Used to turn off the audio and video temporarily.
10 <DAYLIGHT VIEW> button
Used to correct the image when the projector is used in a bright
surroundings.
11 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
12 <ID SET> button
Sets the projector ID on the remote control for a system using
multiple projectors.
13 <D.ZOOM+> button / <D.ZOOM-> button
Zooms in and out the images.
14 <VOL+> button / <VOL-> button
Adjusts the volume level of the built-in speaker or the audio
output.
15 <FUNCTION> button
Specifys a shortcut button for a frequently used operation.
16 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control when using multiple projectors.
17 <P-TIMER> button
Operate the P-TIMER function.
18 <SCREEN ADJ> button
Corrects the distortion of the projected image.
Caution label at the back of the remote control
of Operating Instruction.
ENGLISH - 23
Chapter 1 Preparation - About your projector
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.