Panasonic PT-RZ21KE / PT-RS20K Service Manual ▷ View online
INF-19
SECTION 1 SERVICE INFORMATION
< RZ21K / RS20K >
2) Page 7
• Displays SDI signal information (No signal is displayed with "---").
- MODE
Mode ([NO SIGNAL], [SD-SDI], [HD-SDI], [3G-SDI])
- TRANSPORT
Conversion method ([PROGRESSIVE], [INTER-
LACED])
- PICTURE
Picture information ([PROGRESSIVE], [INTER-
LACED])
- RATE
Rate information ([23.98], [24.00], [25.00], [29.97],
[30.00], [48.00], [50.00], [59.94], [60.00])
- SAMPLING
Sampling information
([4:2:2 (YPBPR)], [4:2:2 (YCBCR)], [4:4:4 (YPBPR)],
[4:4:4 (YCBCR)], 4:4:4 (RGB)], [4:4:4:4 (YPBPR+A)],
[4:4:4:4 (RGB+A)])
- BIT DEPTH
Bit depth ([8bit], [10bit], [12bit])
3) Page 8
• Firmware version displays of each device is added.
- DIGITAL LINK VERSION
Digital LINK firmware
- FPGA VERSION FPGA firmware [FPGA1/2/3]
- CPLD VERSION CPLD firmware
- FM R VERSION Formatter (R) firmware
- FM G VERSION Formatter (G) firmware
- FM B VERSION Formatter (B) firmware
- LD DRIVER VERSION
LD Driver firmware[LD1/LD2]
- LD SUB VERSION LD Sub Driver firmware [LD1/LD2]
- FRC VERSION
FRC (Frame Rate Control) firmware
- POWER VERSION Power microprocessor firmware
4) Page 9
• Firmware version displays of each device is added.
- MAIN VERSION Main firmware
- FPGA VERSION FPGA firmware [FPGA1/3/3]
- BMP VER.
Bitmap data
- ENG VER. ~ JPN VER.
Version of the each font data (English/Russian/Ko-
rean/Chinese/Japanese)
INF-20
SECTION 1 SERVICE INFORMATION
< RZ21K / RS20K >
5) Page 10
- TEMP (IN)
Intake air temperature(Celsius)
- TEMP (OUT)
Exhaust air temperature(Celsius)
- TEMP (OPT)
Optical module temperature(Celsius)
- TEMP (LD1)
LD1 temperature(Celsius)
- TEMP (LD2)
LD2 temperature(Celsius)
- TEMP (FPGA)
FPGA2 surrounding temperature(Celsius)
6) Page 11
- FAN
Fan rotation mode [TYPE A - TYPE J]
- ALT
Altitude mode [ALT1 - ALT5]
- ATM
Air pressure [hPa]
- RADIATOR1
Status of RADIATOR 1 fan [rpm]
- RADIATOR2
Status of RADIATOR 2 fan [rpm]
- RADIATOR3
Status of RADIATOR 3 fan [rpm]
- RADIATOR4
Status of RADIATOR 4 fan [rpm]
- RADIATOR5
Status of RADIATOR 5 fan [rpm]
- RADIATOR6
Status of RADIATOR 6 fan [rpm]
- EXHAUST1
Status of EXHAUST 1 fan [rpm]
- EXHAUST2
Status of EXHAUST 2 fan [rpm]
- DMD1
Status of DMD INTAKE 1 fan [rpm]
- DMD2
Status of DMD INTAKE 2 fan [rpm]
- HEATPIPE
Status of HEATPIPE fan [rpm]
- CIR1
Status of CIRCULATION 1 fan [rpm]
- CIR2
Status of CIRCULATION 2 fan [rpm]
- C-PRISM1
Status of COLOR PRISM 1 fan [rpm]
- C-PRISM2
Status of COLOR PRISM 2 fan [rpm]
- C-PRISM3
Status of COLOR PRISM 3 fan [rpm]
- C-PRISM4
Status of COLOR PRISM 4 fan [rpm]
- C-INTAKE1
Status of CIRCUIT INTAKE 1 fan [rpm]
- C-INTAKE2
Status of CIRCUIT INTAKE 2 fan [rpm]
- LD DRIVER
Status of LD DRIVER fan [rpm]
7) Page 12
- FAN
Fan rotation mode [TYPE A - TYPE J]
- ALT
Altitude mode [ALT1 - ALT5]
- ATM
Air pressure [hPa]
- PUMP-R
Status of Liquid cooling pump R [rpm]
- PUMP-G
Status of Liquid cooling pump G [rpm]
- PUMP-B
Status of Liquid cooling pump B [rpm]
- PUMP1
Status of Liquid cooling pump LD1 [rpm]
- PUMP2
Status of Liquid cooling pump LD2 [rpm]
INF-21
SECTION 1 SERVICE INFORMATION
< RZ21K / RS20K >
8) Pages 13 - 14
- LD1 INFO
Information of each bank of LD1 [On count / Runtime / Status*]
- LD2 INFO
Information of each bank of LD2 [On count / Runtime / Status*]
* Status (0 : Off/ 1: On /* : Intentional Off)
9) Pages 15 - 16
- LD1/LD2 ON /OFF history log
INF-22
SECTION 1 SERVICE INFORMATION
< RZ21K / RS20K >
6. [TEST PATTERN] menu
• The following test patterns are added.
7. [NETWORK] menu
(1) Sub menu [DIGITAL LINK LOW POWER] will be added.
Set the DIGITAL LINK device power saving of during standby.
- DISABLE : Normal power consumption mode.
- ENABLE : Power saving mode.
* Normally set to "DISABLE".
(2) [CHANNEL A - D] information is added to [SIGNAL QUALITY] of sub
menu [DIGITAL LINK STATUS].
- Focus (background 70% gray) pattern
- Checker pattern
- Inverted checker pattern
Click on the first or last page to see other PT-RZ21KE / PT-RS20K service manuals if exist.