Panasonic PT-RZ21KE / PT-RS20K Service Manual ▷ View online
ADJ-25
SECTION 3 ADJUSTMENTS
< RZ21K / RS20K >
8. After loading the firmware, a check-mark and path name to the firmware and a version will be displayed on the information
window.
* Uncheck the firmware name if you do not want to update the firmware.
Click [Update] button to start updating of the firmware if the all information is right.
9. A confirmation message will be displayed. Click [OK] button to start the updating, if the update firmware version is right.
• During the update, the indicator of the projector will be lighting or blinking as table below.
ON/STANDBY
LIGHT1・ LIGHT2
TEMP
Main
Lit in red
Blink in red alternately
OFF
Sub
OFF
Lid in green (all)
OFF
FRC
Lid in green
Lid in red (all)
Lit in red
LD Driver
Lid in green
Lid in red (all)
Lit in red
Formatter
Lid in green
Lid in red (all)
Lit in red
DIGITAL LINK
Lit in red
Blink in red alternately
OFF
10. After finishing the updating, the confirmation message is displayed. Click [OK] button.
ADJ-26
SECTION 3 ADJUSTMENTS
< RZ21K / RS20K >
11. Click [EXIT] button to quit the tool.
• After completing the updating, turn off the main power, turn on the power again, and check that the version
of firmware is updated definitely.
• Enter service mode, and check the version of each firmware on the sub menu [STATUS] screen of [PRO
JECTOR SETUP] menu.
