DOWNLOAD Panasonic PT-RZ21KE / PT-RS20K Service Manual ↓ Size: 31.52 MB | Pages: 127 in PDF or view online for FREE

Model
PT-RZ21KE PT-RS20K
Pages
127
Size
31.52 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 3-CHIP DLP BASED PROJECTOR
File
pt-rz21ke-pt-rs20k.pdf
Date

Panasonic PT-RZ21KE / PT-RS20K Service Manual ▷ View online

DIS-32
SECTION 2 DISASSEMBLY PROCEDURES
< RZ21K / RS20K >
DMD block
Liquid cooling pump
Pump fixing spring
9. Unscrew the screws from each part and separate the DMD block and liquid cooling unit.
   1) Unscrew the pump fixing spring (2 screws x 3 places) and remove the liquid cooling pump part from the DMD block.
   2) Unscrew 4 screws and separate the tank metal and liquid cooling tank.
6
4
Tank metal
Liquid cooling tank
• Apply the heat dissipation compound evenly to the rear surface of liquid cooling pump when assembling. 
• Please pay attention not to fold or twist the tube of liquid cooling pump when assembling.
• Be careful not to pinch the lead wires of DMD temperature 
  sensor with liquid cooling pump during installation.
Apply heat dissipation 
compound
Heat dissipation compound :
Shin-Etsu Silicone [ G-776 ] grade 0.05g x3
Passes the lead wire beside screw.
DIS-33
SECTION 2 DISASSEMBLY PROCEDURES
< RZ21K / RS20K >
2.20. Lens mount block removal
1. Remove the mirror holder following to step "2.19. Mirror holder removal".
2. Unscrew 10 screws-A and remove the shield rubber hold plate1 and shield rubber hold plate2.
2.19. Mirror holder removal
1. Remove the LC joint following to step "2.15. LC joint removal".
2. Remove the DMD block following to step "2.18. DMD block removal".
3. Unscrew 5 screws-A and remove the mirror holder.
A
A
A
A
A
A
Mirror holder
A
A
A
A
A
A
A
A
A
A
A
Shield rubber hold plate2
Shield rubber hold plate1
DIS-34
SECTION 2 DISASSEMBLY PROCEDURES
< RZ21K / RS20K >
4. Unscrew 5 screws-C and remove the lens mount block.
C
C
C
C
C
C
Lens mount block
B
B
B
B
Lens mount flange
3. Unscrew 3 screws-B and remove the lens mount flange.
DIS-35
SECTION 2 DISASSEMBLY PROCEDURES
< RZ21K / RS20K >
2.21. Engine circulation fan block removal
1. Loosen 3 screws-A and remove the bottom cover.
2. Unscrew 7 screws-B and remove the engine circulation fan block.
3. Unscrew 2 screws-C and remove the RG-P.C.Board.
A
B
C
C
C
B
B
B
B
B
B
B
A
A
A
RG-PCB
Bottom cover
Engine circulation fan block
CIRCULATION1 FAN
CIRCULATION2 FAN
4
Page of 127
Display

Click on the first or last page to see other PT-RZ21KE / PT-RS20K service manuals if exist.