Panasonic PT-EZ590E / PT-EZ590LE / PT-EW650E / PT-EW650LE / PT-EW550E / PT-EX620E / PT-EX620LE / PT-EX520E (serv.man2) Service Manual ▷ View online
INF-7
SECTION 1 SERVICE INFORMATION
<EZ590/EW650/EW550/EX620/EX520>
Chapter 4
Settings — Menu navigation
ENGLISH - 63
Note
f
Pressing the <MENU> button while the menu screen is displayed to return the previous menu. You can operate in the same way by pressing
the <RETURN> button.
f
Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted or
used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME LOCK] may not be displayed
depending on the input signal.
depending on the input signal.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f
For menu items, refer to “Main menu” and “Sub menu”.
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
the factory default settings.
button
1)
Press the <DEFAULT> button on the remote control.
Note
f You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP] menu → [INITIALIZE
ALL].
f
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
Main menu
The following items are in the main menu.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
Main menu item
[PICTURE]
[POSITION]
[LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[SECURITY]
[NETWORK]
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
INF-8
SECTION 1 SERVICE INFORMATION
<EZ590/EW650/EW550/EX620/EX520>
Chapter 4
Settings — Menu navigation
64 - ENGLISH
[PICTURE]
Sub-menu item
Factory default
[PICTURE MODE]
[STANDARD]
[CONTRAST]
[0]
[BRIGHTNESS]
[0]
[COLOR]*
2
[0]
[TINT]*
2
[0]
[SHARPNESS]
[+8]
[COLOR TEMPERATURE]
[DEFAULT]
[GAMMA]
[0]
[IRIS]
*3
[OFF]
*1
[ADVANCED MENU]
-
[DAYLIGHT VIEW]
[AUTO]
*1*4
[DIGITAL CINEMA REALITY]*
2
[ON]
[NOISE REDUCTION]*
5
[1]
[TV-SYSTEM]*
5
[AUTO]
[RGB/YP
B
P
R
]/[RGB/YC
B
C
R
]*
6
[AUTO]
*1
Depends on the [PICTURE MODE].
*2
Only for movie-based signals
*3
Only for PT-EZ590, PT-EW650 and PT-EX620
*4
Depends on the [PROJECTION METHOD].
*5
Only when the <VIDEO IN> terminal is selected
*6
Only when the <RGB 1 IN> terminal/<RGB 2 IN> terminal/<HDMI 1 IN> terminal/<HDMI 2 IN> terminal/<DIGITAL LINK/LAN> terminal is selected
Note
f
The factory default settings may vary depending on the picture mode.
[POSITION]
Sub-menu item
Factory default
[REALTIME KEYSTONE]
[OFF]
[SCREEN ADJUSTMENT]
-
[SHIFT]
-
[DOT CLOCK]*
1
[0]
[CLOCK PHASE]*
1
[0]
[OVER SCAN]
-
[ASPECT]
[NORMAL]
*2
[FRAME LOCK]*
1
[OFF]
[CLAMP POSITION]
[24]
*2
*1 Only for still image signals
*2 Depends on the signal input.
*2 Depends on the signal input.
[LANGUAGE]
[DISPLAY OPTION]
Sub-menu item
Factory default
[ON-SCREEN DISPLAY]
-
[RGB IN]
-
[HDMI IN]
-
[DIGITAL LINK IN]
*1
-
[CLOSED CAPTION SETTING]
-
[SCREEN SETTING]
-
[STARTUP LOGO]
[DEFAULT LOGO]
[SHUTTER SETTING]
*1
-
[AUTO SETUP SETTING]
[AUTO]
[SIGNAL SEARCH]
[ON]
[STARTUP INPUT SELECT]
[LAST USED]
INF-9
SECTION 1 SERVICE INFORMATION
<EZ590/EW650/EW550/EX620/EX520>
Chapter 4
Settings — Menu navigation
ENGLISH - 65
Sub-menu item
Factory default
[BACK COLOR]
[BLUE]
[WIDE MODE]
[AUTO]
[SXGA MODE]
[AUTO]
[P-TIMER]
-
[OTHER FUNCTIONS]
-
*1
Only for PT-EZ590, PT-EW650 and PT-EX620
[PROJECTOR SETUP]
Sub-menu item
Factory default
[STATUS]
-
[PROJECTOR ID]
[ALL]
[INITIAL START UP]
[LAST MEMORY]
[PROJECTION METHOD]
[AUTO]
[LAMP POWER]
[NORMAL]
[ECO MANAGEMENT]
-
[RS-232C]
-
[REMOTE1 MODE]
[DEFAULT]
[FUNCTION BUTTON]
-
[AUDIO SETTING]
-
[TEST PATTERN]
-
[FILTER COUNTER]
-
[SCHEDULE]
[OFF]
[DATE AND TIME]
-
[LENS CALIBRATION]
-
[INITIALIZE ALL]
-
[SERVICE PASSWORD]
-
[SECURITY]
Sub-menu item
Factory Default
[PASSWORD]
[OFF]
[PASSWORD CHANGE]
-
[DISPLAY SETTING]
[OFF]
[TEXT CHANGE]
-
[MENU LOCK]
[OFF]
[MENU LOCK PASSWORD]
-
[CONTROL DEVICE SETUP]
-
[NETWORK]
Sub-menu item
Factory default
[DIGITAL LINK MODE]
*1
[AUTO]
[DIGITAL LINK STATUS]
*1
-
[DIGITAL LINK MENU]
*1
-
[WIRED LAN]
-
[PROJECTOR NAME]
[Name 1234]
*2
[NETWORK CONTROL]
-
[NETWORK STATUS]
-
[INITIALIZE]
-
*1
Only for PT-EZ590, PT-EW650 and PT-EX620
*2
It will be different for each product.
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f
Sub-menu items and factory default settings vary depending on the selected input terminal.
INF-10
SECTION 1 SERVICE INFORMATION
<EZ590/EW650/EW550/EX620/EX520>
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "ON-SCREEN DISPLAY" of the main menu "DISPLAY OPTION".
3. Select a sub menu "INPUT GUIDE" and press the [ENTER] button for more than 3 seconds. The projector set into the
service mode and the "EXTRA OPTION" menu will be displayed on the screen.
3. 2. Cancelling the Service Mode
1. In the service mode, press the [MENU] button on the control panel of the projector or on the remote controller to cancel the
service mode. The menu of "Use mode" will be displayed.
3. 3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" menu will be displayed.
EXTRA OPTION
FREEZE MESSAGE
ON
FAN FULL MODE
OFF
VGA60/480P AUTO
EMULATE
- BAUD RATE
EMULATE
- BAUD RATE
9600
- VERSION
--- / M1A
- INPUT SELECT
SELF CHECK
TEST PATTERN
FLICKER ADJUST
MODEL NO.SETTING
PANEL TYPE SETTING
SELF CHECK
TEST PATTERN
FLICKER ADJUST
MODEL NO.SETTING
PANEL TYPE SETTING
L
INPUT AUTO CALIBRATION
WHITE BALANCE ADJUST
ACCELERATION CALIBRARION
CLOG SENSOR CALIBRATION
VALENS
DIGITAL LINK SETUP
RGB PIXEL ADJUST
GHOST FB CALIBRATION
OPTION 6
HDMI SIG CHG INTR
WHITE BALANCE ADJUST
ACCELERATION CALIBRARION
CLOG SENSOR CALIBRATION
VALENS
DIGITAL LINK SETUP
RGB PIXEL ADJUST
GHOST FB CALIBRATION
OPTION 6
HDMI SIG CHG INTR
1
CLOG SHUTDOWN
ON
FRAME LOCK SS
ON
1.
2.
3.
4.
5.
6.
3.
4.
5.
6.
7.
8.
9.
9.
10.
11.
12.
13.
14.
15.
16.
13.
14.
15.
16.
17.
18.
19.
20.
19.
20.
21.
22.
23.
23.
24.
Click on the first or last page to see other PT-EZ590E / PT-EZ590LE / PT-EW650E / PT-EW650LE / PT-EW550E / PT-EX620E / PT-EX620LE / PT-EX520E (serv.man2) service manuals if exist.