Panasonic PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE (serv.man11) Service Manual ▷ View online
PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE
5
2. Specifications
Model No.
PT-DZ8700U
PT-DZ110XE
PT-DZ110XE
PT-DS8500U
PT-DS100XE
PT-DS100XE
PT-DW8300U
PT-DW90XE
Power supply
AC120 V 60 Hz (PT-DZ8700U/DS8500U/DW8300U)
AC220 V - 240 V 50Hz/60Hz (PT-DZ110XE/DS100XE/DW90XE)
AC220 V - 240 V 50Hz/60Hz (PT-DZ110XE/DS100XE/DW90XE)
970 W (DZ8700U)
920 W (DZ110XE)
920 W (DZ110XE)
920 W (DS8500U/DW8300U)
900 W (DS100XE/DW90XE)
900 W (DS100XE/DW90XE)
Power consumption
When [STANDBY MODE] is [ECO] : Approx. 0.2 W (U model) / Approx: 0.3 W (E model)
When [STANDBY MODE] is [NORMAL] : Approx. 6 W (U model) / Approx: 8W (E model)
When [STANDBY MODE] is [NORMAL] : Approx. 6 W (U model) / Approx: 8W (E model)
Amps
9.5 A (DZ8700U)
5.0 A (DZ110XE)
5.0 A (DZ110XE)
9.0 A (DS8500U/DW8300U)
4.8 A (DS100XE/DW90XE)
4.8 A (DS100XE/DW90XE)
Panel size
0.96 inch (aspect ratio 16 : 10)
0.95 inch (aspect ratio 4 : 3)
0.85 inch (aspect ratio 16 : 9)
Display system
Three-unit DLP chip, DLP type
DLP chip
Number of pixels
2 304 000 pixels
(1 920 × 1 200 dots) × 3
1 470 000 pixels
(1 400 × 1 050 dots) × 3
1 049 088 pixels
(1 366 × 768 dots) × 3
Lens
Option
Projection lamp
2 bulbs × 355 W UHM lamp
Optical output *1
10 600 lm (ANSI)
9 600 lm (ANSI)
H : 15 kHz - 100 kHz, V : 24 Hz - 120 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
For RGB signal
Dot clock frequency Less than 162 MHz
[480i]
H: 15.73 kHz, V: 59.94 Hz
[480p]
H: 31.5 kHz, V: 59.94 Hz
[720/50p] H: 37.5 kHz, V: 50 Hz
[1 035/60i] H: 33.75 kHz, V: 60 Hz
[1 080/60i] H: 33.75 kHz, V: 60 Hz
[1 080/25p] H: 28.13 kHz, V: 25 Hz
[1 080/30p] H: 33.75 kHz, V: 30 Hz
[1 080/50p] H: 56.25 kHz, V: 50 Hz
[1 035/60i] H: 33.75 kHz, V: 60 Hz
[1 080/60i] H: 33.75 kHz, V: 60 Hz
[1 080/25p] H: 28.13 kHz, V: 25 Hz
[1 080/30p] H: 33.75 kHz, V: 30 Hz
[1 080/50p] H: 56.25 kHz, V: 50 Hz
[576i]
H: 15.63 kHz, V: 50 Hz
[576p]
H: 31.25 kHz, V: 50 Hz
[720/60p]
H: 45 kHz, V: 60 Hz
[1 080/50i]
H: 28.13 kHz, V: 50 Hz
[1 080/24p] H: 27 kHz, V: 24 Hz
[1 080/24sF] H: 27 kHz, V: 48 Hz
[1 080/60p] H: 67.5 kHz, V: 60 Hz
[1 080/24sF] H: 27 kHz, V: 48 Hz
[1 080/60p] H: 67.5 kHz, V: 60 Hz
For YP
B
P
R
signal
HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
For video signal
(S-video included)
H : 15.75 kHz/15.63 kHz, V : 50 Hz/60 Hz
For DVI-D/HDMI
signal
signal
480p, 576p, 720/60p, 720/50p, 1 080/60p, 1 080/50p, 1 080/60i, 1 080/50i, 1 080/24sF, 1 080/30p,
1 080/25p, 1 080/24p
Displayable resolution : VGA - WUXGA (non-interlace)
Dot clock frequency : 25 MHz - 162 MHz
1 080/25p, 1 080/24p
Displayable resolution : VGA - WUXGA (non-interlace)
Dot clock frequency : 25 MHz - 162 MHz
Applicable
scanning
frequency*2
scanning
frequency*2
For SDI signal
SMPTE259M compatible: [480i], [576i]
SMPTE292M compatible: [720/60p], [720/50p], [1 035/60i],
SMPTE292M compatible: [720/60p], [720/50p], [1 035/60i],
[1 080/60i], [1 080/50i], [1 080/25p],
[1 080/24p], [1 080/24sF], [1 080/30p]
—
Color system
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Screen size
70 inch - 600 inch *3
Screen aspect ratio
16 : 10
4 : 3
16 : 9
Projection scheme
Menu-selectable from front/rear/ceiling mount, and floor mounting
Contrast ratio
10 000 : 1 (when [DYNAMIC IRIS] has been set to [3])
Power cord length
3.0 m
Cabinet
Molded plastic
PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE
6
Model No.
PT-DZ8700U
PT-DZ110XE
PT-DZ110XE
PT-DS8500U
PT-DS100XE
PT-DS100XE
PT-DW8300U
PT-DW90XE
RGB1 IN
1 set, BNC × 5
[RGB signal] 0.7 V [p-p] 75 Ω (G-SYNC : 1.0 [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
[YP
[RGB signal] 0.7 V [p-p] 75 Ω (G-SYNC : 1.0 [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
[YP
B
P
R
signal] Y : 1.0 V [p-p] Synchronization signal included, P
B
P
R
: 0.7 V [p-p] 75 Ω
RGB2 IN
1 set of high density, D-sub 15-pin (female)
[RGB signal] 0.7 V [p-p] 75 Ω (G-SYNC : 1.0 [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
[YP
[RGB signal] 0.7 V [p-p] 75 Ω (G-SYNC : 1.0 [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
[YP
B
P
R
signal] Y : 1.0 V [p-p] Synchronization signal included, P
B
P
R
: 0.7 V [p-p] 75 Ω
VIDEO IN
1 set, BNC, 1.0 V [p-p] 75 Ω
S-VIDEO IN
1 set, Mini DIN 4-pin, Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω, compatible with S1 signal
DVI-D IN
1 set, DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible
HDMI IN
1 set, HDMI 19-pin (HDCP/Deep color compatible)
SDI IN
1 set, BNC, Y/CB/CR/4 : 2 : 2, 10 bits
SMPTE259M/SMPTE292M compatible
—
SERIAL IN/OUT
1 set, D-sub 9-pin, RS-232C compatible, computer control use
REMOTE 1
IN/OUT
IN/OUT
1 set, M3 pin jack, wired remote control use, multiple connection use
REMOTE 2 IN
1 set, D-sub 9-pin, external control use
Terminals
LAN
1 set, RJ-45, network connection use, PJ-Link compatible, 10 Base-T/100Base-TX
Dimensions
Width : 530 mm (20 7/8"), Length : 200 mm (7 7/8"), Height : 548.5 mm (21 19/32")
(540 mm (21 1/4") : not including surface projection parts)
Weight
Approx. 24.0 kg (52.9 lbs.) *4
Operating environment
Temperature *5 : 0 °C to 45 °C / Humidity : 10 % to 80 % (no condensation)
Power supply
DC 3 V (AA/R6 battery × 2)
Operating range
Approx. 30 m (98'5") (when operated directly in front of signal receptor)
Weight
134 g (including batteries)
Remote control
Dimensions
Width : 51 mm (2"), Length : 176 mm (6 15/16"), Height : 28 mm (1 3/32")
Ceiling bracket
For high ceiling : ET-PKD310H / For low ceiling : ET-PKD310S
Ceiling Mount Attachment : ET-PAD310
Ceiling Mount Attachment : ET-PAD310
Projection lens
ET-D75LE6, ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4, ET-D75LE5, ET-D75LE8
ET-D75LE10, ET-D75LE20, ET-D75LE30
ET-D75LE10, ET-D75LE20, ET-D75LE30
Lens Motor Cover
ET-D75MC1
Replacement
Lamp Unit
Lamp Unit
ET-LAD310 (1 bulb), ET-LAD310W (2 bulbs)
Replacement filter
unit
unit
ET-ACF310
Smoke Cut Filter
ET-SFD310
Options
Frame ET-PFD310
*1: Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2: For details of video signals that can be projected using this projector, refer to “List of compatible signals”
*3: If ET-D75LE5 is installed, screen size is 70 inches - 300 inches.
*4: This is the average value. It may differ depending on each product.
*5: When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, temperature will be 5 °C lower than this higher limit.
When a Smoke Cut Filter is used, the ambient temperature is 0 °C to 35 °C. However, use at high altitudes is not possible.
The part numbers of accessories and separately sold components are subject to change without notice.
*2: For details of video signals that can be projected using this projector, refer to “List of compatible signals”
*3: If ET-D75LE5 is installed, screen size is 70 inches - 300 inches.
*4: This is the average value. It may differ depending on each product.
*5: When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, temperature will be 5 °C lower than this higher limit.
When a Smoke Cut Filter is used, the ambient temperature is 0 °C to 35 °C. However, use at high altitudes is not possible.
The part numbers of accessories and separately sold components are subject to change without notice.
SECTION 1
CONTENTS
1. The name of each part
----------------------------- INF-2
1.1. Projector body
1.2. Control panel
1.3. Terminals
1.4. Remote control
2. OSD Menu Navigation ----------------------------- INF-5
3. Service Mode
----------------------------------------- INF-6
3.1. Setting to Serviceman Mode
3.2. Resetting to User Mode
3.3. Functions in Service Mode
4. External Controls
------------------------------------- INF-9
4.1. Control through Serial terminal
4.2. Control through LAN
4.3. Control commands List
5. Cautions for Service -------------------------------- INF-13
5.1. Before service
5.2. Support for service
5.3. Initialization of the menu lock password
6. Troubleshooting
------------------------------------- INF-15
6.1. Summary of shutdown system
6.2. System log data acquisition method
6.3. Troubleshooting
< Service Information >
Model No.
PT-DZ8700U / DZ110XE
PT-DS8500U
/
DS100XE
PT-DW8300U
/
DW90XE
PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE
INF-2
1. The name of each part
1.1. Projector body
■Front view
■Side views (right)
■Rear view
■Bottom view
■Side views (left)
Click on the first or last page to see other PT-DZ8700U / PT-DS8500U / PT-DW8300U / PT-DZ110XE / PT-DS100XE / PT-DW90XE (serv.man11) service manuals if exist.