Panasonic KX-MB3030RU / KX-FAP106A7 Service Manual ▷ View online
109
KX-MB3030RU
11 Service Mode
The programming functions are used to program the various features and functions of the machine, and to test the machine.
This facilitates communication between the user and the service man while programming the unit.
This facilitates communication between the user and the service man while programming the unit.
11.1. Programming and Lists
11.1.1. Operation
There are 2 basic categories of programming functions, the User Mode and the Service Mode. The Service Mode is further broken
down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are available to
the user. The special programs are only those listed here and not displayed to the user. In both the User and Service Modes, there
are Set Functions and Test Functions. The Set Functions are used to program various features and functions, and the Test Func-
tions are used to test the various functions. The Set Functions are accessed by entering their code, changing the appropriate value,
then pressing the SET key. The Test Functions are accessed by entering their code and pressing the key listed on the menu. While
programming, to cancel any entry, press the STOP key.
Note:
down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are available to
the user. The special programs are only those listed here and not displayed to the user. In both the User and Service Modes, there
are Set Functions and Test Functions. The Set Functions are used to program various features and functions, and the Test Func-
tions are used to test the various functions. The Set Functions are accessed by entering their code, changing the appropriate value,
then pressing the SET key. The Test Functions are accessed by entering their code and pressing the key listed on the menu. While
programming, to cancel any entry, press the STOP key.
Note:
When changing the set values on the service function table, they should not be set beyond the local regulation.
Follow the laws and regulations of your area.
Follow the laws and regulations of your area.
11.1.2. Operation Flow
110
KX-MB3030RU
11.1.3. Service Function Table
Code
Function
Set Value
Effective
Range
Default
Remarks
501
Pause time set
X 100 msec
001~600
030
----------
503
Dial speed select
1:10 pps
2:20 pps
2:20 pps
1, 2
1
----------
507
V34 transmission start speed
0: Disable
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8
0~8
1
508
V34 reception start speed
0: Disable
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8
0~8
1
514
Bell signal detect time
X 100msec
1~9
6
----------
520
CED frequency select
1:2100
Hz
2:1100 Hz
1, 2
1
See Symptom/Countermeasure Table for long dis-
tance and international calls in (P.172).
tance and international calls in (P.172).
521
International mode select
1:ON 2:OFF 1, 2
1
See Symptom/Countermeasure Table for long dis-
tance and international calls in (P.172).
tance and international calls in (P.172).
522
Auto standby select
1:ON 2:OFF 1, 2
1
The resolution reverts to the default when transmis-
sion is complete.
sion is complete.
523
Receive equalizer select
1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
1~4
1
Set RX equalizer to automatic mode.
524
Transmission equalizer select
1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
2: 1.8 km
3: 3.6 km
4: 7.2 km
1~4
1
529
Call Service Clear
550
Memory clear
Refer to Memory Clear Specification (P.112).
551
ROM check
See (P.105).
552
DTMF single tone test
1:ON 2:OFF 1, 2
2
See (P.105).
553
Monitor on FAX communication
select
select
1:OFF
2:PHASE B
3:ALL
2:PHASE B
3:ALL
1~3
1
Sets whether to monitor the line signal with the
unit's speaker during FAX communication or not.
unit's speaker during FAX communication or not.
554
Modem test
See (P.105).
555
Scanner test
See (P.105).
556
Motor test
00
See (P.105).
557
LED test
See (P.105).
558
LCD test
See (P.105).
561
KEY test
See (P.105).
567
T0 timer
X second
001~255
031
Sets a higher value when the response from the
other party needs more time during automatic FAX
transmission.
other party needs more time during automatic FAX
transmission.
570
BREAK % select
1:61% 2:67% 1, 2
1
Sets the % break of pulse dialing according PBX.
573
Remote turn-on ring number set
X number of
rings
rings
00~99
00
Sets the number of rings before the unit starts to
operate TAM in the TEL mode.
operate TAM in the TEL mode.
574
Dial tone detect check
1: ON
2: OFF
2: OFF
1, 2
2
----------
590
FAX auto redial time set
X number of
times
times
00~99
03
Selects the number of redial times during FAX com-
munication (not including the first dial).
munication (not including the first dial).
591
FAX auto redial time disconnection
time set
time set
X second
001~999
065
Sets the FAX redial interval during FAX communi-
cation.
cation.
111
KX-MB3030RU
592
CNG transmit select
1:OFF
2:ALL
3:AUTO
2:ALL
3:AUTO
1~3
2
Lets you select the CNG output during FAX trans-
mission. ALL: CNG is output at phase A. AUTO:
CNG id output only when automatic dialing is per-
formed. OFF: CNG id not output at phase A. Refer
to (P.166).
mission. ALL: CNG is output at phase A. AUTO:
CNG id output only when automatic dialing is per-
formed. OFF: CNG id not output at phase A. Refer
to (P.166).
593
Time between CED and 300bps
1:75 msec
2:500 msec
3:1 sec
2:500 msec
3:1 sec
1~3
1
See Symptom/Countermeasure Table for long
distance and international calls in (P.172). Refer to
(P.167) and (P.172).
distance and international calls in (P.172). Refer to
(P.167) and (P.172).
594
Overseas DIS detection select
1:detects
at
the 1st time
2:detects at
the 2nd time
2:detects at
the 2nd time
1, 2
1
See Symptom/Countermeasure Table for long
distance and international calls in (P.172). Refer to
(P.166) and (P.172).
distance and international calls in (P.172). Refer to
(P.166) and (P.172).
595
Receive error limit value set
1: 5%
2: 10%
3: 15%
4: 20%
2: 10%
3: 15%
4: 20%
1~4
2
If the number of errors during transmission exceeds
this value, the sending side terminates the call.
this value, the sending side terminates the call.
596
Transmit level set
X dBm
- 15~00
10
Selects the FAX transmission level. Refer to (P.166)
and (P.167).
and (P.167).
598
Receiving sensitivity
43= -43 dBm
20~48
48
Used when there is an error problem. Refer to
(P.172).
(P.172).
599
ECM frame size
1:256 2:64
1, 2
1
----------
639
LSU test
See (P.105).
655
Cause Distinction Code of Call Service 3
See (P.133).
677
FAN test
See (P.105).
710
Memory clear except History data
Use this function when delay occurs in the line and
communication (ex. Mobile comm) does not work
well.
communication (ex. Mobile comm) does not work
well.
717
Transmit speed select
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training during FAX trans-
mission. Refer to
mission. Refer to
(
P.166
)
and
718
Receive speed select
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training during FAX
reception. Refer to
reception. Refer to
(
P.167
)
and
729
Fixing temperature
X
°C
000~255
200
Use this function when the printing papers are
severely curled.
At first, we recommend setting Media type to [Thin
Paper].
If the result is not enough, press “190” then SET
key and set Media type to [Thin Paper].
[Attention]
Do not set over 200 or less than 190. Because it
may cause Call Service 3 or the unsatisfactory fix-
ing performance.
severely curled.
At first, we recommend setting Media type to [Thin
Paper].
If the result is not enough, press “190” then SET
key and set Media type to [Thin Paper].
[Attention]
Do not set over 200 or less than 190. Because it
may cause Call Service 3 or the unsatisfactory fix-
ing performance.
774
Receiving T4 timer
X 100 sec
00~99
00
Use this function when delay occurs in the line and
communication.
(ex. Mobile comm) does not work well.
communication.
(ex. Mobile comm) does not work well.
775
Transmission T4 timer
X 100m sec
00~99
00
Use this function when delay occurs in the line and
communication.
(ex. Mobile comm) does not work well.
communication.
(ex. Mobile comm) does not work well.
815
Sensor check
See (P.105).
852
Print test pattern
See (P.105).
853
Top margin
X 0.5mm
1~11
6
----------
854
Left margin
X 0.5mm
1~11
6
----------
856
Top margin (Duplex)
X 0.5mm
1~11
6
----------
870
Left margin (OPF)
X 0.5mm
1~11
6
----------
871
Left margin (Duplex)
X 0.5mm
1~11
6
----------
874
DTMF ON time
X msec
060~200
100
----------
875
DTMF OFF time
X msec
060~200
100
----------
880
History list
See
(
P.116
)
.
881
Journal 2 list
See
(
P.170
)
.
882
Journal 3 list
See
(
P.171
)
.
Code
Function
Set Value
Effective
Range
Default
Remarks
112
KX-MB3030RU
11.1.4. Memory Clear Specification
*
1
Execute Service Mode #550 when you want to reset the all setting data keeping the user information.
*
2
Execute Service Mode #710 to clear the user information in case that Main Unit is recycled.
Note:
Please restart a power supply after clearing a memory.
Click on the first or last page to see other KX-MB3030RU / KX-FAP106A7 service manuals if exist.